<div dir="ltr">Hi,<div><br></div><div>I am using VTK 5.10. My Application flow is  reading Dicom images using DicomReader then segment it and  saving result by using VTKSTL writer.</div><div>When i am generating the Stl its Physical position is not correct.In detail.</div>
<div>Volume Bound is taken from VTKImage (inputimageread from ITK reader convert into VTKImage)</div><div> -50 199.512</div><div>-102 147.312</div><div>58.25 290.75</div><div><br></div><div>While according to DICOM tag it should be </div>
<div>-50 -102 58.25  for first image</div><div>-50 -102 -174  for last image<br></div><div><br></div><div><br></div><div>STL location</div><div>Zmin 178<br></div><div>Zmax 221.99</div><div>and here i need Z flip also .</div>
<div><br></div><div>but it should come according to Dicom Physical position of that images  </div><div>Zmin -59.25</div><div>Zmax -104.250</div><div><br></div><div>I want to set VTK orientation according to DICOM So, that i would map  the Dicom(physical position ) to VTK world position.</div>
<div><br></div><div>Please give me some clue.Thanks in advance.</div><div><br></div><div>Best Regards,</div><div>tabshi </div><div><br></div><div><br></div><div><br></div><div><br></div><div> </div><div><br></div><div><br>
</div></div>