MantisBT - ParaView
View Issue Details
IDProjectCategoryView StatusDate SubmittedLast Update
0009531ParaViewBugpublic2009-09-14 11:102016-08-12 09:57
ReporterKen Moreland 
Assigned ToJulien Finet 
PrioritynormalSeverityminorReproducibilityhave not tried
StatusclosedResolutionmoved 
PlatformOSOS Version
Product Version 
Target VersionFixed in Version 
Project
Topic Name
Type
Summary0009531: Scatter plot "camera" should be reset when coordinates are changed
DescriptionWhen you change the coordinates used for a scatter plot, it often results in a different scale on that axis, which makes the current view pretty much invalid. When a new coordinate is selected, the camera should automatically be reset. To see the problem in action, do the following:

1. Load disk_out_ref.ex2. All variables on. Apply.
2. Create a scatter plot view. Make disk_out_ref visible.
3. In the Display panel, change X Coords to Temp.

When you changed the X Coords from the point X coords to the Temp field, the range changed from about -6 to 6 to about 200-900. The data is now completely outside the current view and you cannot see anything. Clicking reset camera will bring the data back into the view.
Steps To Reproduce
Additional Information
TagsNo tags attached.
Relationships
Attached Files
Issue History
Date ModifiedUsernameFieldChange
2009-09-14 11:10Ken MorelandNew Issue
2009-09-14 11:10Ken MorelandStatusbacklog => tabled
2009-09-14 11:10Ken MorelandAssigned To => Julien Finet
2016-08-12 09:57Kitware RobotNote Added: 0037704
2016-08-12 09:57Kitware RobotStatusexpired => closed
2016-08-12 09:57Kitware RobotResolutionopen => moved

Notes
(0037704)
Kitware Robot   
2016-08-12 09:57   
Resolving issue as `moved`.

This issue tracker is no longer used. Further discussion of this issue may take place in the current ParaView Issues page linked in the banner at the top of this page.