Proposals:Condor: Difference between revisions
| Line 813: | Line 813: | ||
Now create a work directory on the new machine. | Now create a work directory on the new machine, it is important that this has the same name as the work directory on the other machines, in this example '''C:\mpich2work'''. | ||
Copy any needed input files to the work directory. | |||
Copy the '''mpiexec.exe''' file from the '''MPICH2_INSTALL\bin''' directory to the work directory. | |||
That is all that is necessary. You can have the actual executable and the driver batch script both sent to the new execute node via commands in your Condor submission file. | |||
== MPI Based Meta-Optimization Framework == | == MPI Based Meta-Optimization Framework == | ||
Revision as of 18:47, 24 June 2011
Introduction
Condor is an open source distributed computing software framework. It can be used to manage workload on a dedicated cluster of computers, and/or to farm out work to idle desktop computers. Condor is a cross-platform system that can be run on Unix and Windows operating system. Condor is a complex and flexible system that can execute jobs in serial and parallel mode. For parallel jobs, it supports the MPI standard. This Wikipage is dedicated to document our working experience using Condor.
Downloading Condor
Different versions of condor can be downloaded from here. This documentation focuses on our experience installing/configuring Condor Version 7.2.0. The official detail documentation for this version can be found here
Preparation
As Condor is a flexible system, there are different ways of configuring condor in your computing infrastructure. Hence, before starting installation, make the following important decisions.
- What machine will be the central manager?
- What machines should be allowed to submit jobs?
- Will Condor run as root or not?
- Do I have enough disk space for Condor?
- Do I need MPI configured?
Condor can be installed as either a manager node, a execute or a submit node. Or any combination of these ones. See The Different Roles a Machine Can Play
- Manager: There can be only one central manager for your pool. The machine is the collector of information, and the negotiator between resources and resource request
- Execute: Any machine in your pool (including the Central Manager) can be configured to execute Condor jobs.
- Submit: Any machine in your pool (including the Central Manager) can be configured to allow Condor jobs to be submitted.
For more information regarding other required preparatory work, refer the documentation
Installation
Unix
The official instructions on how to install Condor in Unix can be found here . Below we present some of tweaks we had to do to get it to work on our Unix machines.
Prerequisites
- Be sure the server has a hostname and a domain name
hostname
should return mymachine.mydomain.com (or .org, .edu, etc.) , if it only returns mymachine, then your server does not have a fully qualified domain name.
To set the domain name, edit /etc/hosts and add your domain name to the first line. You might see something like
10.171.1.124 mymachine
change this to
10.171.1.124 mymachine.mydomain.com
Also edit /etc/hostname to be
mymachine.mydomain.com
Then reboot so that the hostname changes take effect.
- Make sure the following packages are installed:
apt-get install mailutils
- Make sure the server has a hostname and a domainname.
- Download the package condor-7.2.X-linux-x86_64-rhel5-dynamic.tar.gz ( Platform RHEL 5 Intel x86/64 ) See http://www.cs.wisc.edu/condor/downloads-v2/download.pl
For example, you could run a similar command to download the desired package:
wget http://parrot.cs.wisc.edu//symlink/20090223121502/7/7.2/7.2.1/fec3779ab6d2d556027f6ae4baffc0d6/condor-7.2.X-linux-x86_64-rhel5-dynamic.tar.gz
- You should install Condor as root or with a user having equivalent privileges
Configuring a Condor Manager in Unix
- Make sure the condor archive is in your home directory (For example /home/kitware), then untar it.
cd ~ tar -xzvf condor-7.2.X-linux-x86_64-rhel5-dynamic.tar.gz cd ./condor-7.2.X
- If not yet done, create a condor user
adduser condor
- Run the installation scripts condor_install
./condor_install --install=. --prefix=/root/condor --local-dir=/home/condor/localcondor
After running the installation script, you should get the following output:
Installing Condor from /root/condor-7.2.X to /root/condor
Condor has been installed into:
/root/condor
Configured condor using these configuration files:
global: /root/condor/etc/condor_config
local: /home/condor/localcondor/condor_config.local
Created scripts which can be sourced by users to setup their
Condor environment variables. These are:
sh: /root/condor/condor.sh
csh: /root/condor/condor.csh
- Switch to the directory where condor is now installed
cd /root/condor
- Edit /etc/environment and update PATH variable to include the directory /root/condor/bin and /root/condor/sbin
PATH="/root/condor/bin:/root/condor/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games"
- Add the following line
CONDOR_CONFIG="/root/condor/etc/condor_config"
- Save file and apply the change by running
source /etc/environment
- Make sure CONDOR_CONFIG and PATH are set correctly
root@rigel:~$ echo $PATH /root/condor/bin:/root/condor/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games root@rigel:~$ echo $CONDOR_CONFIG /root/condor/etc/condor_config
- You can know logout / login or even restart he machine, and you should be able check that CONDOR_CONFIG and PATH environment variables are still set.
- Edit condor manager config_file and update the line as referenced below:
cd ~/condor vi ./etc/condor_config
RELEASE_DIR = /root/condor LOCAL_DIR = /home/condor/localcondor CONDOR_ADMIN = email@website.com UID_DOMAIN = website.com FILESYSTEM_DOMAIN = website.com HOSTALLOW_READ = *.website.com HOSTALLOW_WRITE = *.website.com HOSTALLOW_CONFIG = $(CONDOR_HOST)
- If you have MIDAS integration, in order to allow Midas to run condor command, create a link to /root/condor/etc/condor_config into /home/condor
cd /home/condor ln -s /home/condor/etc/condor_config condor_config
Configuring a Executer/Submitter in Unix
The different files allowing the server to be also used as a condor submitter/executer have been automatically updated while running the installation script condor_install. Nevertheless, you still need to update its configuration file.
- Edit condor node config_file.local and update the line as referenced below:
vi /home/condor/condor_config.local
CONDOR_ADMIN = email@website.com
If the installation went well, the line having UID_DOMAIN and FILESYSTEM_DOMAIN should already be set to website.com
Windows
The official documentation on how to install Condor in Windows can be found here. Below we describe our experience installing Condor in Windows 7.
- Download the Windows install MSI, run it, installing to "C:/condor".
- Accept the license agreement.
- Decide if you are installing a central controller or a submit/execute node
- If installing a Central Controller, then select "create a new central pool" and set the name of the pool
- Otherwise select "Join an existing Pool" and enter the hostname of the central manager ( full address ).
- Decide whether the machine should be a submitter node, and select the appropriate option.
- Decide when Condor should run jobs, if the machine will be an executor.
- Decide what happens to jobs when the machine stops being idle.
- For accounting domain enter your domain (e.g. yourdomaininternal.com)
- For Email settings (I ignored this by clicking next)
- for Java settings (I ignored this as we weren't using Java, by clicking next)
Set the following settings when prompted
Host Permission Settings: hosts with read: * hosts with write: * hosts with administrator access $(FULL_HOSTNAME) enable vm universe: no enable hdfs support: no
When asked if you want a custom install or install, choose install. This will install condor to C:\condor.
The install will ask you to reboot your machine. If you want to access the condor command line programs from anywhere on your system, add C:\condor\bin to your system's PATH environment variable.
When you will be running condor commands, start a cygwin or cmd prompt with elevated/administrator privileges.
After the install, I could see the condor system by running
condor_status
and this helped me fix up some problems. My condor_status at first gave me "unable to resolve COLLECTOR_HOST". There are many helpful log files to review in C:\condor\log. The first of these I looked at was .master_address. The IP address listed there was incorrect (since my machine has multiple IP addresses, I needed to specify the IP address of my wired connection, which is on the same subnet as my COLLECTOR_HOST. Your IP address might incorrectly be a localhost loopback address like 127.0.0.1, or perhaps just an IP that you would not want).
I shut down condor, right clicked on C:/condor in a Windows explorer, turned off "read only" and set permissions to allow for writing. Then I edited the file "c:/condor/condor_config.local" which started out empty, so that it could pick up some replacement values (some of them didn't seem to be set properly during the install). These values are:
NETWORK_INTERFACE = <IP address>
UID_DOMAIN = *.yourdomaininternal.com
FILESYSTEM_DOMAIN = *.yourdomaininternal.com
COLLECTOR_NAME = PoolName
ALLOW_READ = *
ALLOW_WRITE = *
# Choose one of the following:
#
# For a submit/execute node:
DAEMON_LIST = MASTER, SCHEDD, STARTD
# For a central collector host and submit/execute node:
DAEMON_LIST = MASTER, COLLECTOR, NEGOTIATOR, SCHEDD, STARTD, KBDD
TRUST_UID_DOMAIN = True
START = True
You may want to add DEFAULT_DOMAIN_NAME = yourinternaldomain.com if your machine comes up without a domain name in condor.
and then restarted condor. If you ran "condor_status" and see that the Windows machine had Activity=OWNER rather than UNCLAIMED, be sure that you have added in START=True. But this may not be the best configuration for a Windows workstation that is in use. There is probably some additional configuration needed to make sure a Condor job doesn't use the machine when a physical human user is there using it.
At this point I was able to get one of the Condor Windows examples working, but with a bit of tweaking for Windows 7.
Here is the batch file contents for the actual job (printname.bat)
@echo off echo Here is the output from "net USER" : net USER
And here is the printname.sub condor submission file I ran with
condor_submit printname.sub
universe = vanilla environment = path=c:\Windows\system32 executable = printname.bat output = printname.out error = printname.err log = printname.log queue
Useful Condor Commands on Windows
To run these commands, get a command prompt or Cygwin terminal, right click the icon to start it up, and click "run with elevated privileges" or "run as administrator".
condor_master runs as a service on Windows, which controls the other daemons.
To stop condor
net stop condor
To start condor
net start condor
At first before you can submit a job to Condor on Windows, you'll need to store your user's credentials (password). Run
condor_store_cred add
then enter your password.
Running Condor
The official user's manual on how to perform distributed computing in Condor is here
- run the condor manager
condor_master
- Assuming at the installation process, you setup the type as manager,execute,submit (the default), running the following command
ps -e | egrep condor_
- You should get something similar to:
1063 ? 00:00:00 condor_master 1064 ? 00:00:00 condor_collecto 1065 ? 00:00:00 condor_negotiat 1066 ? 00:00:00 condor_schedd 1067 ? 00:00:00 condor_startd 1068 ? 00:00:00 condor_procd
- If you run the command ps -e | egrep condor_ just after you started condor, you may also see the following line
1077 ? 00:00:00 condor_starter
- Check the status
kitware@rigel:~$ condor_status
Name OpSys Arch State Activity LoadAv Mem ActvtyTime
slot1@rigel LINUX X86_64 Unclaimed Idle 0.010 1006 0+00:10:04
slot2@rigel LINUX X86_64 Unclaimed Idle 0.000 1006 0+00:10:05
Total Owner Claimed Unclaimed Matched Preempting Backfill
X86_64/LINUX 2 0 0 2 0 0 0
Total 2 0 0 2 0 0 0
- Setup condor to automatically startup
cp /root/condor/etc/example/condor.boot /etc/init.d/
- Update MASTER parameter in condor.boot to match your current setup
vi /etc/init.d/condor.boot MASTER=/root/condor/sbin/condor_master
- Add condor.boot service to all runlevel
kitware@rigel:~$ update-rc.d condor.boot defaults /etc/rc0.d/K20condor.boot -> ../init.d/condor.boot /etc/rc1.d/K20condor.boot -> ../init.d/condor.boot /etc/rc6.d/K20condor.boot -> ../init.d/condor.boot /etc/rc2.d/S20condor.boot -> ../init.d/condor.boot /etc/rc3.d/S20condor.boot -> ../init.d/condor.boot /etc/rc4.d/S20condor.boot -> ../init.d/condor.boot /etc/rc5.d/S20condor.boot -> ../init.d/condor.boot
A simple example demonstrating the use of Condor
#include <unistd.h>
#include <stdio.h>
int main( int argc, char** argv )
{
printf( "%s\n", argv[1] );
fflush( stdout );
sleep( 30 );
return 0;
}
This exe will repeat the command line argument it is given, wait 30 seconds, then exit.
Save this file as foo.c, then compile it with (note static linking).
gcc foo.c -o foo --static
Create a condor job description, saving the file as condorjob:
universe = vanilla executable = foo should_transfer_files = YES when_to_transfer_output = ON_EXIT log = condorjob.log error = condorjob.err output = condorjob.out arguments = "helloworld" Queue
then submit the job to condor:
condor_submit condorjob
After this job finishes, you should have three files in the submission directory:
condorjob.err (contains the standard error, empty in this case)
condorjob.out (should contain standard output, in this case "helloworld")
condorjob.log (should contain info about the execution of the job, such as the machine that submitted the job and the machine that executed the job)
If you want to test this job on multiple slots (say 2 at once so you can see how Condor will execute the job on multiple execute resources), you can
change the condorjob file to be like this:
universe = vanilla executable = foo should_transfer_files = YES when_to_transfer_output = ON_EXIT log = condorjob1.log error = condorjob1.err output = condorjob1.out arguments = "helloworld1" Queue
log = condorjob2.log error = condorjob2.err output = condorjob2.out arguments = "helloworld2" Queue
We had a case where we had 6 slots, 2 were 32 bit with Arch=INTEL, 4 were 64 bit with Arch=X86_64 (but we were unaware of the bit difference at first). We ran 6 jobs and then were wondering why they would only execute on the submitting machine. So we changed the condorjob file to specify a certain architecture by including
Requirements = Arch == "INTEL"
and submitted this from the X86_64 machine. This told condor to execute only on machines with Architecture of Intel, so it was not attempted to execute on the X86_64 submitting machine. We then saw an error in condorjob1.log saying
Exec format error
and we realized we had tried to run an executable compiled for the wrong architecture. I've included this story in case it helps with debugging.
Additional Information
Troubleshooting Condor
Our experience with Condor involved a lot of errors that we had to systematically understand and overcome. Here are some lessons from our experience.
- Be sure that your executable is statically linked.
- For Unix submission/execution, We found that we needed to run jobs as a user that exists on all machines on the Condor grid, because we do not have shared Unix users on our network. In our case this user was Condor.
- When building BatchMake, you need to build with grid support on
Condor supplies a number of utility programs and log files. These are extremely helpful in understanding and correcting problems. Our setups have Condor log files in /home/condor/localcondor/log and C:\condor\log.
condor_status
Allows you to check the status of the Condor Pool. This is the first command line program you should get working, as it will help you debug other problems.
condor_q
Shows you what processes are active, that you have submitted to condor. It will give you a cluster and process ID for each process.
condor_q -analyze CID.PID condor_q -better-analyze CID.PID
When given the cluster ID and process ID, these will tell you how many execution machines matched each of your requirements for the job.
condor_config_val <CONDOR_VARIABLE>
Will tell you the value of that CONDOR_VARIABLE for your condor setup. This can help maintain your sanity.
condor_rm CID.PID
Will remove the job with cluster ID CID and process ID PID from your condor pool. Useful for killing Held or Idle jobs. For more details on these daemons, see section "3.1.2 The Condor Daemons" in the Condor Manual.
condor_master
On any machine, no matter its configuration, there will be a condor_master daemon. This process will start and stop all other condor daemons. condor_master will write a MasterLog and have a .master_address file. Be sure that the .master_address contains the correct IP address. If the correct IP address doesn't appear, set the correct value in the parameter
NETWORK_INTERFACE = <desired IP>
in your condor_config.local file. This must be an interface the machine actually has, but condor may have picked a different IP than you would have wanted, perhaps the local loopback address 127.0.0.1 or a wireless instead of ethernet adapter.
condor_startd
This daemon runs on execution nodes, and represents a machine ready to do work for Condor. Its log file describes its requirements. This daemon starts up the condor_starter daemon.
condor_starter
This daemon runs on execution nodes, and is responsible for starting up actual execution processes, and logging their details.
condor_schedd
This daemon runs on submit nodes, and represents data about submitted jobs. It tracks the queueing of jobs and tries to get resources for all of its jobs to be run. When a job submitted is run, this daemon spawns a condor_shadow daemon.
condor_shadow
This daemon runs on the submission machine when an actual execution of the job is run. It will take care of systems calls that need to be executed on the submitting machine for a process. There will be a condor_shadow process for each executing process of a submission machine, meaning that on a machine with a large number of submitted processes, the number of shadow daemons supported by memory or other resources could be a limitation.
condor_collector
This daemon runs on the Pool Collector machine, and is responsible for keeping track of resources within the Pool. All nodes in the pool let this daemon on the Pool Collector machine know that they exist, what services they support, and what requirements they have.
condor_negotiator
This daemon typically runs on the Pool Collector machine, and negotiates between submitted jobs and executing nodes to match a job with an execution. Log files of interest include NegotiatorLog and MatchLog
condor_kbdd
This daemon is used to detect user activity on a execute node, so it can know whether to allow execution of a job or to disallow it because a human user currently is engaged in some task.
The right processor architecture
The initial installation was done with the package condor-7.2.0-linux-ia64-rhel3-dynamic.tar.gz corresponding to IA64 which corresponds to the Intel Itanium processor 64bits. It doesn't include all 64bits intel processors.
While trying to run the condor_master, the shell returned the following error message cannot execute binary file
Using the program readelf, it's possible to extract the header of an executable and understand if a given executable could run on a given platform.
kitware@rigel:~/$ readelf -h ~/condor-7.2.0_IA64/sbin/condor_master ELF Header: Magic: 7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 Class: ELF64 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: EXEC (Executable file) Machine: Intel IA-64 Version: 0x1 Entry point address: 0x40000000000bf3e0 Start of program headers: 64 (bytes into file) Start of section headers: 9382744 (bytes into file) Flags: 0x10, 64-bit Size of this header: 64 (bytes) Size of program headers: 56 (bytes) Number of program headers: 7 Size of section headers: 64 (bytes) Number of section headers: 32 Section header string table index: 31
kitware@rigel:~$ readelf -h /bin/ls ELF Header: Magic: 7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 Class: ELF64 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: EXEC (Executable file) Machine: Advanced Micro Devices X86-64 Version: 0x1 Entry point address: 0x4023c0 Start of program headers: 64 (bytes into file) Start of section headers: 104384 (bytes into file) Flags: 0x0 Size of this header: 64 (bytes) Size of program headers: 56 (bytes) Number of program headers: 8 Size of section headers: 64 (bytes) Number of section headers: 28 Section header string table index: 27
kitware@rigel:~$ readelf -h ./condor-7.2.0/sbin/condor_master ELF Header:
Magic: 7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 Class: ELF64 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: EXEC (Executable file) Machine: Advanced Micro Devices X86-64 Version: 0x1 Entry point address: 0x4b9450 Start of program headers: 64 (bytes into file) Start of section headers: 4553256 (bytes into file) Flags: 0x0 Size of this header: 64 (bytes) Size of program headers: 56 (bytes) Number of program headers: 8 Size of section headers: 64 (bytes) Number of section headers: 31 Section header string table index: 30
Comparing the different output, it's possible to observe the architecture Intel IA-64 isn't the right one.
Be sure that your executable is statically linked.
For Unix submission/execution, We found that we needed to run jobs as a user that exists on all machines on the Condor grid, because we do not have shared Unix users on our network. In our case this user was Condor.
When building BatchMake, you need to build with grid support on
Condor supplies a number of utility programs and log files. These are extremely helpful in understanding and correcting problems. Our setups have Condor log files in /home/condor/localcondor/log and C:\condor\log.
Links
- Detailed Condor documentation is also available on the website here
MPICH2 on Windows
Here we record our experience using MPICH2 on Windows, working towards using MPICH2+Condor in (ideally) a mixed Windows and Linux environment or else in a homogeneous environment.
This will have to be cleaned up to make more sense as we gain more experience.
MPICH2 Environment on Windows 7
First install MPICH2, I installed the version 1.3.2p1, windows 32 bit binary. Then add the location of the MPICH2\bin directory to your system path. Add mpiexec.exe and smpd.exe to the list of exceptions in the Windows firewall.
I created the same user/password combination (with administrative rights) on two different Windows 7 machines. All work was done logged in as that user.
The following was performed in a Windows CMD prompt run with Administrative Privileges (right click on the CMD executable and run it as an Administrator).
I reset the smpd passphrase
smpd -remove
then set the same smpd passphrase on both machines
smpd -install -phrase mypassphrase
and could then check the status using
smpd -status
I had to register my user credentials on both machines by
mpiexec -register
then accepted the user it suggested by hitting enter, then entered my user's Windows account password.
You can check which user you are with
mpiexec -whoami
And now you should be able to validate with
mpiexec -validate
it will ask you for an authentication password for smpd, this the mypassphrase you entered above. If all is correct at this point, you will get a result of SUCCESS.
To test this, you can run the cpi.exe example application in the MPICH2\examples directory (I ran it with 4 processors since my machine has 4 cores):
mpiexec -n 4 full_path_to\cpi.exe
You can also test that both machines are participating in a computation by specifying the IPs of the two machines, and how many processes each machine should run, and the executable hostname, which should return the two different hostnames of the two machines.
mpiexec -hosts 2 ip_1 #_cores_1 ip_2 #_cores_2 hostname
Creating an MPI program on Windows
I used MS Visual Studio Express 2008 (MSVSE08) to build a C++ executable.
Here is a very simple working C++ example program:
#include "stdafx.h"
#include <iostream>
#include "mpi.h"
using namespace std;
//
int main(int argc, char* argv[])
{
// initialize the MPI world
MPI::Init(argc,argv);
//
// get this process's rank
int rank = MPI::COMM_WORLD.Get_rank();
//
// get the total number of processes in the computation
int size = MPI::COMM_WORLD.Get_size();
//
// print out where this process ranks in the total
std::cout << "I am " << rank << " out of " << size << std::endl;
//
// Finalize the MPI world
MPI::Finalize();
return 0;
}
To compile this in MSVSE08, you must right click on the project file (not the solution file), then click properties, and make the following additions:
- Under C/C++ menu, Additional Include Directories property, add the full path to the MPICH2\include directory
- Under Linker/General menu, Additional Library Directories, add the full path to the MPICH2\lib directory
- Under Linker/Input menu, Additional Dependencies, add mpi.lib and cxx.lib
You can test your application using:
mpiexec -n 4 full_path_to\your.exe
Then to run your exe on two different machines (I had to build a RELEASE for this, at first I had built a DEBUG build, but this caused problems on the second machine):
- create the same directory on both machines (e.g. C:\mpich2work)
- copy the exe to this directory on both machines
- execute the exe on one machine, specifying both IPs and how many processes you want to run on each machine (I run as many processes as cores):
mpiexec -hosts 2 ip_1 #_cores_1 ip_2 #_cores_2 full_path_to_exe_on_both_machines
MPICH2 and Condor on Windows
To configure MPI over Condor, I set my Windows 7 laptop up as a dedicated Condor scheduler and executer followed the instructions at this link:
https://condor-wiki.cs.wisc.edu/index.cgi/wiki?p=HowToConfigureMpiOnWindows
I turned off smpd.exe as a service, since Condor will manage it:
smpd.exe -remove
I then created the following MPI example program, and ran this with a MachineCount of 2 and 4 at different times (I ran this on my laptop, which has 4 cores, and had Condor running locally) . This program assumes an even number of processes. It shows examples of both synchronous and asynchronous communication using MPI.
Resources that I found to be helpful in developing this program are:
http://www-uxsup.csx.cam.ac.uk/courses/MPI/
https://computing.llnl.gov/tutorials/mpi/
#include "stdafx.h"
#include <iostream>
#include "mpi.h"
using namespace std;
//
int main(int argc, char *argv[])
{
MPI::Init(argc, argv);
//
int rank = MPI::COMM_WORLD.Get_rank();
int size = MPI::COMM_WORLD.Get_size();
char processor_name[MPI_MAX_PROCESSOR_NAME];
MPI::Get_processor_name(processor_name,namelen);
//
int buf[1];
int numElements = 1;
// initialize buffer with rank
buf[0] = rank;
// example of synchronous communication
// have even ranks send to odd ranks first
// assumes an even number of processes
int syncTag = 123;
if (rank % 2 == 0)
{
// send to next higher rank
int dest = rank + 1;
std::cout << processor_name << "." << rank << " will send to " << dest << ", for now buf[0]= " << buf[0] << std::endl;
MPI::COMM_WORLD.Send(buf,numElements,MPI::INT,dest,syncTag);
// now wait for dest to send back
// even though dest is the param, in the Recv call it is used as the source
MPI::COMM_WORLD.Recv(buf,numElements,MPI::INT,dest,syncTag);
std::cout << processor_name << "." << rank << ", after receiving from " << dest << ", buf[0]= " << buf[0] << std::endl;
}
else
{
// source is next lower rank
int source = rank - 1;
std::cout << processor_name << "." << rank << ", will receive from " << source << ", for now buf[0]= " << buf[0] << std::endl;
MPI::COMM_WORLD.Recv(buf,numElements,MPI::INT,source,syncTag);
std::cout << processor_name << "." << rank << ", after receiving from " << source << ", buf[0]= " << buf[0] << std::endl;
// send rank rather than buffer, just to be sure
// even though param is source, in Send call it is for dest
MPI::COMM_WORLD.Send(&rank,numElements,MPI::INT,source,syncTag);
}
// now for asynchronous communication
std::cout << processor_name << "." << rank << " switching to asynchronous" << std::endl;
int asyncTag = 321;
int leftRank;
if (rank == 0)
{
leftRank = size-1;
}
else
{
leftRank = (rank-1);
}
int rightRank;
if (rank == size-1)
{
rightRank = 0;
}
else
{
rightRank = (rank+1);
}
// everyone sends to the leftRank, and receives from the rightRank
// if this were synchronous, would be in danger of deadlocking because of circular waits
// reset buffers to rank
buf[0] = rank;
std::cout << processor_name << "." << rank << " will send to " << leftRank << ", for now buf[0]= " << buf[0] << std::endl;
MPI::Request sendReq = MPI::COMM_WORLD.Isend(buf,numElements,MPI::INT,leftRank,asyncTag);
MPI::Request recvReq = MPI::COMM_WORLD.Irecv(buf,numElements,MPI::INT,rightRank,asyncTag);
// wait on the receipt
MPI::Status status;
recvReq.Wait(status);
std::cout << processor_name << "." << rank << " after receiving from " << rightRank << ", buf[0]= " << buf[0] << std::endl;
//
MPI::Finalize();
return(0);
}
I then created a two machine Condor parallel universe grid, using the same user/password combination on both machines, and this user had Administrative rights. My 4 core Windows 7 profession laptop (X86_64,WINNT61) was the CONDOR_HOST and the DedicatedScheduler. Assuming this laptop is called clavicle in the shoulder.com domain, here are the important configuration parameters in its condor_config.local file:
CONDOR_HOST=clavicle.shoulder.com SMPD_SERVER = C:\Program Files (x86)\MPICH2\bin\smpd.exe SMPD_SERVER_ARGS = -p 6666 -d 1 DedicatedScheduler = "DedicatedScheduler@clavicle.shoulder.com" STARTD_EXPRS = $(STARTD_EXPRS), DedicatedScheduler START = TRUE SUSPEND = FALSE PREEMPT = FALSE KILL = FALSE WANT_SUSPEND = FALSE WANT_VACATE = FALSE CONTINUE = TRUE RANK = 0 DAEMON_LIST = MASTER, SCHEDD, STARTD, COLLECTOR, NEGOTIATOR, SMPD_SERVER
The second machine, a 2 core Windows XP desktop called scapula (INTEL,WINNT51) was a dedicated machine with the following important parameters in its condor_config.local file:
CONDOR_HOST=clavicle.shoulder.com SMPD_SERVER = C:\Program Files\MPICH2\bin\smpd.exe SMPD_SERVER_ARGS = -p 6666 -d 1 DedicatedScheduler = "DedicatedScheduler@clavicle.shoulder.com" STARTD_EXPRS = $(STARTD_EXPRS), DedicatedScheduler START = TRUE SUSPEND = FALSE PREEMPT = FALSE KILL = FALSE WANT_SUSPEND = FALSE WANT_VACATE = FALSE CONTINUE = TRUE RANK = 0 DAEMON_LIST = MASTER, STARTD, SMPD_SERVER
Note how it points to clavicle both as CONDOR_HOST and as the DedicatedScheduler, and that is does not have (x86) in its path to the smpd.exe.
MPICH2 gets installed to different locations, to C:\Program Files\MPICH2 for an (INTEL,WINNT51) machine, and to C:\Program Files (x86)\MPICH2 for a (X86_64,WINNT61) machine. Because I needed to refer to the mpiexec.exe path in the batch file that my Condor submit file referred to, and this batch file would be the same for both machines, I opted to copy mpiexec.exe to the work directory I was using on all machines, C:\mpich2work.
After setting up this configuration, I rebooted both machines to start in this configuration. At this point, the command
net stop condor
no longer returns correctly, since Condor is managing the smpd.exe service now and does not know how to stop that service.
Based on the Condor submit file described in the Condor wiki page, I had to adapt my own submit file for my above MPI executable called mpiwork.exe to be the following:
universe = parallel executable = mp2script.bat arguments = mpiwork.exe machine_count = 6 output = out.$(NODE).log error = error.$(NODE).log log = work.$(NODE).log should_transfer_files = yes when_to_transfer_output = on_exit transfer_input_files = mpiwork.exe Requirements = ((Arch == "INTEL") && (OpSys == "WINNT51")) || ((Arch == "X86_64") && (OpSys == "WINNT61")) queue
and my mp2script.bat file was adapted to be:
set _CONDOR_PROCNO=%_CONDOR_PROCNO% set _CONDOR_NPROCS=%_CONDOR_NPROCS% REM If not the head node, just sleep forever if not [%_CONDOR_PROCNO%] == [0] copy con nothing REM Set this to the bin directory of MPICH installation set MPDIR="C:\mpich2work" REM run the actual mpijob %MPDIR%\mpiexec.exe -n %_CONDOR_NPROCS% -p 6666 %* exit 0
with the change being that MPDIR is a location that is known to have mpiexec.exe on both machines, since I copied that file there on both machines as described above.
A point of confusion I have is that I would have expected the mpiwork.exe code above to have the name of clavicle and scapula in the output when I ran it on 6 nodes. Instead only the name clavicle appeared. I do believe that this was running on both machines and all 6 cores, as both machine's IP addresses were noted in the work.parallel.log, and both machines had CPU activity at the time the executable ran.
Adding an Additional Compute Node, for MPICH2 and Condor on Windows
Once you have an existing pool and you want to add a new node to the pool, it is relatively straightforward once you have Condor initially installed on the node. We have found that it isn't necessary to have the same user account on the new node to run Condor/MPI as it is on the existing pool machines.
After you have Condor set up initially on the new node, stop condor via a command line started with Administrative privileges:
net stop condor
Edit your condor_config.local as shown above for the execute node example, so that this new node is a dedicated execute node.
Restart Condor:
net start condor
Now create a work directory on the new machine, it is important that this has the same name as the work directory on the other machines, in this example C:\mpich2work.
Copy any needed input files to the work directory.
Copy the mpiexec.exe file from the MPICH2_INSTALL\bin directory to the work directory.
That is all that is necessary. You can have the actual executable and the driver batch script both sent to the new execute node via commands in your Condor submission file.
MPI Based Meta-Optimization Framework
High Level Architecture
The system was designed for infrastructure reuse. The infrastructure classes take care of organization of the computation nodes and communication between the computation nodes. When a new MetaOptimization is needed, the client programmer should create subclasses of MetaOptimizer, JobDefinition, Results, and RegistrationWorker specific to the computational problem.
MPI Aware Infrastructure C++ classes
MasterSlave: Entry point of the application, initializes the MPI infrastructure, starts up a Master (sending it a particular MetaOptimizer subclass), starts up as many Slave nodes as are necessary (sending each of them a particular RegistrationWorker subclass), and finalizes the MPI infrastructure when the computation is complete.
Master: The central controlling part of the infrastructure, it manages the available Slaves, sending them JobDefinitions as needed, collects Results from the Slaves as Results come in, will re-run a JobDefinition if it has failed or timed out, and shuts down all Slaves when the computation is finished. The Master owns a particular MetaOptimizer subclass. The MetaOptimizer subclass is aware of the particular computation, the Master is only knows how to communicate with Slaves and does not have any responsibility for determining the breakdown of a computation into parts or its completion.
Slave: One of the processing nodes, part of the infrastructure. Each Slave manages a RegistrationWorker subclass. Slaves announce their presence to the Master, receive a JobDefinition describing a particular job, pass the JobDescription on to the RegistrationWorker to run the job, receive back a Results upon completion of the job, and send the Results back to the Master. Slaves are intended to run multiple rounds of registration during a particular computational run.
Infrastructure Event C++ classes
MasterEvent & SlaveEvent (named for the origin of the Event) are Infrastructure Event classes, and each hold a Message Wrapper class as a payload.
The idea behind the job message wrapper classes was to make message wrappers that knew how to bi-directionally convert their specific named parameters to array buffers, thus giving them a pseudo-serialization ability without having them to be aware of MPI specifics. Each message wrapper class is associated with a specific Infrastructure Event class (SlaveEvents own a Results, and MasterEvents own a JobDefinition). The Infrastructure Event classes take care of sending from Master classes to Slave classes, and from Slave classes to Master classes.
The MetaOptimizer subclasses will return JobDefinition subclasses to the Master, which then wraps the JobDefinition subclass in a MasterEvent, and sends the MasterEvent to a Slave. A Slave reads a MasterEvent, extracts the Results subclass, and sends the Results subclass to a RegistrationWorker subclass. Upon completion of the calculation for the JobDefinition, the RegistrationWorker returns a Results subclass to the Slave, which then wraps the Results in a SlaveEvent and sends the SlaveEvent to the Master. The Master reads the SlaveEvent, extracts the Results subclass, and sends this Results subclass to the MetaOptimizer.
Computation Specific C++ classes
Note: currently these classes are specific to a particular example computation, they need to have the interface abstracted out and the specific example computation extracted and moved to subclasses.
JobDefinition: A Message Wrapper class that defines the parameters of a particular job, a specific subclass of JobDefinition should be used for a particular computation.
Results: A Message Wrapper class that defines the return values of a particular job, a specific subclass of Results should be used for a particular computation.
MetaOptimizer: The MetaOptimizer subclass for a particular computation takes care of determining the parameters for a particular job (in the form of a JobDefinition), and determining how many JobDefinitions will be in a round of computation. The MetaOptimizer then takes in the Results from each JobDefinition, and upon receiving Results for each JobDefinition in a round, can either determine a new round of computation by recalculating the new set of parameters for the new round, or else terminate the computation.
RegistrationWorker: The RegistrationWorker subclass for a particular computation will take in a particular JobDefinition subclass germane to the computation, perform the actual registration computation, then return the results in the form of a specific Results subclass that is relevant to the computation.
