CMake:Install Commands: Difference between revisions

From KitwarePublic
Jump to navigationJump to search
No edit summary
Line 33: Line 33:


==New INSTALL Command==
==New INSTALL Command==
 
The new '''INSTALL''' command replaces all the old commands with a single
The new '''INSTALL''' command replaces all the old commands with a single
command. This command is much more flexible and provide a common interface for
command. This command is much more flexible and provide a common interface for
all installation requirements.
all installation requirements.
In addition to all the old functionality, this command also provides a way to
install directories, run CMake scripts and inline CMake code, as well as a
'''component''' framework.


==Replacing The Old INSTALL_* Commands==
==Replacing The Old INSTALL_* Commands==
Line 42: Line 46:
Each of the old commands can be replaced with a proper signature of the new
Each of the old commands can be replaced with a proper signature of the new
'''INSTALL''' command.
'''INSTALL''' command.
It is important to note that the new INSTALL command takes all the paths as
relative paths. If absolute path is provided, the absolute path will be used.
===Replace INSTALL_FILES===
Let say that we have files in source and build directory that we are trying to
install. These files are: file1.h, file2.h, file3.h, file4.hxx, file5.txt, and
file6.cmake. Assume file1.h, file2.h, file4.hxx, and file5.txt are in the
source tree, while all the other files are in the build tree.
INSTALL_FILES(/include .h file1.cxx file2.c file3.h)
INSTALL_FILES(/include "\.hxx")
INSTALL_FILES(/share/special_files FILES file5.txt
  ${CMAKE_CURRENT_BINARY_DIR}/file6.cmake)
These lines are replaced with:
INSTALL(FILES file1.h file2.h ${CMAKE_CURRENT_BINARY_DIR}/file3.h
  DESTINATION /include)
FILE(GLOB files "${CMAKE_CURRENT_SOURCE_DIR}/*.hxx")
INSTALL(FILES ${files} DESTINATION /include)
INSTALL(FILES file5.txt ${CMAKE_CURRENT_BINARY_DIR}/file6.cmake
  DESTINATION /share/special_files)
===Replace INSTALL_PROGRAMS===
Assuming there are scripts scr1 and scr2, where scr2 is in the build directory.
The code in CMake list file would look like this:
INSTALL_PROGRAMS(/bin FILES scr1 ${CMAKE_CURRENT_BINARY_DIR}/scr2)
This line is replaced with:
INSTALL(PROGRAMS scr1 ${CMAKE_CURRENT_BINARY_DIR}/scr2
  DESTINATION /bin)


===Replace INSTALL_TARGETS===
===Replace INSTALL_TARGETS===


Assuming there are targets: ExecutableTarget, StaticLibraryTarget, and SharedLibraryTarget. Typically there would be code in CMake list file that would look like this:
Assuming there are targets: ExecutableTarget, StaticLibraryTarget, and
SharedLibraryTarget. Typically there would be code in CMake list file that
would look like this:


  INSTALL_TARGETS(/bin ExecutableTarget)
  INSTALL_TARGETS(/bin ExecutableTarget)
Line 54: Line 96:


  INSTALL(TARGETS ExecutableTarget StaticLibraryTarget SharedLibraryTarget
  INSTALL(TARGETS ExecutableTarget StaticLibraryTarget SharedLibraryTarget
   RUNTIME DESTINATION /bin
   RUNTIME DESTINATION bin
   LIBRARY DESTINATION /lib
   LIBRARY DESTINATION lib
   ARCHIVE DESTINATION /lib
   ARCHIVE DESTINATION lib
  )
  )



Revision as of 15:28, 3 October 2006

Overview

CMake has an elaborate install process that simplifies installation of programs, libraries, and other files. In CMake version 2.4 the new INSTALL command was introduced that encompasses the functionality of all the old install commands. This page describes the new INSTALL command and the transition from the old one.

Old INSTALL_* Commands

INSTALL_FILES
Create rules to install the listed files with the given extension into the given directory. Only files existing in the current source tree or its corresponding location in the binary tree may be listed. If a file specified already has an extension, that extension will be removed first. This is useful for providing lists of source files such as foo.cxx when you want the corresponding foo.h to be installed. A typical extension is '.h'.
INSTALL_FILES(<dir> extension file file ...)
INSTALL_FILES(<dir> regexp)
Any files in the current source directory that match the regular expression will be installed.
INSTALL_FILES(<dir> FILES file file ...)
Any files listed after the FILES keyword will be installed explicitly from the names given. Full paths are allowed in this form. The directory <dir> is relative to the installation prefix, which is stored in the variable CMAKE_INSTALL_PREFIX.
INSTALL_PROGRAMS
Create rules to install the listed programs into the given directory. Use the FILES argument to guarantee that the file list version of the command will be used even when there is only one argument.
INSTALL_PROGRAMS(<dir> file1 file2 [file3 ...])
INSTALL_PROGRAMS(<dir> FILES file1 [file2 ...])
INSTALL_PROGRAMS(<dir> regexp)
In the third form any program in the current source directory that matches the regular expression will be installed. This command is intended to install programs that are not built by cmake, such as shell scripts. See the TARGETS form of the INSTALL command to create installation rules for targets built by cmake. The directory <dir> is relative to the installation prefix, which is stored in the variable CMAKE_INSTALL_PREFIX.


INSTALL_TARGETS
Create rules to install the listed targets into the given directory. The directory <dir> is relative to the installation prefix, which is stored in the variable CMAKE_INSTALL_PREFIX. If RUNTIME_DIRECTORY is specified, then on systems with special runtime files (Windows DLL), the files will be copied to that directory.
INSTALL_TARGETS(<dir> [RUNTIME_DIRECTORY dir] target target)

New INSTALL Command

The new INSTALL command replaces all the old commands with a single command. This command is much more flexible and provide a common interface for all installation requirements.

In addition to all the old functionality, this command also provides a way to install directories, run CMake scripts and inline CMake code, as well as a component framework.

Replacing The Old INSTALL_* Commands

Each of the old commands can be replaced with a proper signature of the new INSTALL command.

It is important to note that the new INSTALL command takes all the paths as relative paths. If absolute path is provided, the absolute path will be used.

Replace INSTALL_FILES

Let say that we have files in source and build directory that we are trying to install. These files are: file1.h, file2.h, file3.h, file4.hxx, file5.txt, and file6.cmake. Assume file1.h, file2.h, file4.hxx, and file5.txt are in the source tree, while all the other files are in the build tree.

INSTALL_FILES(/include .h file1.cxx file2.c file3.h)
INSTALL_FILES(/include "\.hxx")
INSTALL_FILES(/share/special_files FILES file5.txt
  ${CMAKE_CURRENT_BINARY_DIR}/file6.cmake)

These lines are replaced with:

INSTALL(FILES file1.h file2.h ${CMAKE_CURRENT_BINARY_DIR}/file3.h
  DESTINATION /include)
FILE(GLOB files "${CMAKE_CURRENT_SOURCE_DIR}/*.hxx")
INSTALL(FILES ${files} DESTINATION /include)
INSTALL(FILES file5.txt ${CMAKE_CURRENT_BINARY_DIR}/file6.cmake
  DESTINATION /share/special_files)

Replace INSTALL_PROGRAMS

Assuming there are scripts scr1 and scr2, where scr2 is in the build directory. The code in CMake list file would look like this:

INSTALL_PROGRAMS(/bin FILES scr1 ${CMAKE_CURRENT_BINARY_DIR}/scr2)

This line is replaced with:

INSTALL(PROGRAMS scr1 ${CMAKE_CURRENT_BINARY_DIR}/scr2
  DESTINATION /bin)

Replace INSTALL_TARGETS

Assuming there are targets: ExecutableTarget, StaticLibraryTarget, and SharedLibraryTarget. Typically there would be code in CMake list file that would look like this:

INSTALL_TARGETS(/bin ExecutableTarget)
INSTALL_TARGETS(/lib StaticLibraryTarget)
INSTALL_TARGETS(/lib RUNTIME_DIRECTORY /bin SharedLibraryTarget)

These lines are replaced with:

INSTALL(TARGETS ExecutableTarget StaticLibraryTarget SharedLibraryTarget
  RUNTIME DESTINATION bin
  LIBRARY DESTINATION lib
  ARCHIVE DESTINATION lib
)

RUNTIME refers to the runtime piece of the target. Runtime piece only applies to executable targets and DLL (Winows) style shared libraries. LIBRARY refers to all the other (non DLL) shared libraries and modules. ARCHIVE refers to the static libraries and the import parts of DLL libraries (LIB files).