# Difference between revisions of "CMake FAQ"

## General information and availability

### What is CMake

CMake is a cross-platform, open-source make system. CMake is used to control the software compilation process using simple platform and compiler independent configuration files. CMake generates native makefiles and workspaces that can be used in the compiler environment of your choice. CMake is quite sophisticated: it is possible to support complex environments requiring system configuration, preprocessor generation, code generation, and template instantiation. Please go to http://www.cmake.org/HTML/About.html to learn more about CMake.

### What is the current release?

The current release of CMake is 2.0. This release is available at:

Nightly development can be accessed through CVS.

### CMake roadmap and release schedule

CMake 2.2 is out. Depending on funding and time there may be support for FORTRAN, native Java, and cross-compiling. The bug tracker at www.cmake.org/Bug also has a number of feature requests for CMake. These feature requests typically et rolled into future versions of CMake.

### I found a Bug! What should I do?

Please report the bug in our bug tracker: http://www.cmake.org/Bug .

Please make sure to look at the old bugs not to include duplicates, include detailed instructions of the bug and how to reproduce it.

### I want a new feature in CMake. What should I do?

Report a feature request in our Bug tracker http://www.cmake.org/Bug .

Please make sure to look at the old feature requests not to include duplicates, include detailed instructions of the feature and proposed implementation.

## Using CMake

### Backward and Forward Compatibility

CMake by default maintains quite a bit of backwards compatibility to support older projects that used earlier versions of CMake. This backwards compatibility comes at the expense of allowing new CMakeLists.txt to use deprecated features and still work. To deal with this problem, CMake always creates a cache entry called CMAKE_BACKWARDS_COMPATIBILITY and sets it to the version (major.minor) of CMake currently running. During the "Configure" step, CMake will support enough backward compatibility features to simulate the version of CMake specified by this cache entry's value. When a new version of CMake is run on an old project and reports errors, one can set CMAKE_BACKWARDS_COMPATIBILITY to an older version of CMake to solve the problem.

A good practice for project developers that use CMake is to add code like this to the RELEASE version of the source tree:

 IF(CMAKE_BACKWARDS_COMPATIBILITY GREATER 2.0)
SET(CMAKE_BACKWARDS_COMPATIBILITY 2.0 CACHE STRING
ENDIF(CMAKE_BACKWARDS_COMPATIBILITY GREATER 2.0)


That way whenever someone tries to build the release with a later version of CMake, the necessary backward compatibility level will already be set. DO NOT keep this code in the development version of the source tree. When a new version of CMake is released, it is good practice to fix the problems it reports in the source tree instead of abusing the backward compatibility features.

When a new version of CMake is released that adds some features, it is nice to be able to take advantage of them in your project. However, doing so will cause other developers that have not yet upgraded to the new CMake to get errors when attempting to build the source. In order to have CMake tell them that they need to upgrade, your project should contain a line like this:

 CMAKE_MINIMUM_REQUIRED(VERSION 2.0)


at the top of your main CMakeLists.txt file. This will tell older versions of CMake that they are too old to build this project and produce a message telling the user they need to upgrade to a more recent version of CMake.

### How do I get the current source or binary directory?

Is there any way to get the "current working directory" in a CMake variable?

You can use the following:

CMAKE_CURRENT_SOURCE_DIR: points to your current source directory CMAKE_CURRENT_BINARY_DIR: points to the equivalent binary directory

### Why are my CMake variables not updated in the GUI after a SET command?

The cache variables listed in the GUI when you press "Configure" are used to initialize the values seen by the code in CMakeLists.txt files.

Changes made by the code are used during the configure step and seen by the generators but are not stored back into the cache. For example:

 SET(BUILD_SHARED_LIBS ON)


will turn on building of shared libraries for the directory containing the command and all subdirectories, but the change will not appear in the GUI.

The CACHE and FORCE options on the SET command can be used to change variables in a way that will be reflected in the GUI. Run

 cmake --help-command SET


to see full instructions for the command.

### How can I generate a source file during the build?

The ADD_CUSTOM_COMMAND command can be used to generate a source file that is then included in another target. For example:

 ADD_CUSTOM_COMMAND(
OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/foo.c COMMAND${CMAKE_COMMAND}
ARGS -E copy ${CMAKE_CURRENT_SOURCE_DIR}/bar.c${CMAKE_CURRENT_BINARY_DIR}/foo.c
DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/bar.c ) ADD_EXECUTABLE(foo foo.c)  This will create an executable by copying bar.c to foo.c and then compiling it to produce the executable. Whenever bar.c changes foo.c will be regenerated and the executable rebuilt. This even works when the generator command is another executable built in the same project:  ADD_EXECUTABLE(my_generator my_generator.c) GET_TARGET_PROPERTY(MY_GENERATOR_EXE my_generator LOCATION) ADD_CUSTOM_COMMAND( OUTPUT${CMAKE_CURRENT_BINARY_DIR}/generated.c
COMMAND ${MY_GENERATOR_EXE} ARGS${CMAKE_CURRENT_BINARY_DIR}/generated.c
${CMAKE_CURRENT_SOURCE_DIR}/some_input.txt DEPENDS${MY_GENERATOR_EXE}
${CMAKE_CURRENT_SOURCE_DIR}/some_input.txt ) ADD_EXECUTABLE(generated generated.c)  It is assumed in this example that the my_generator program accepts as its first argument the full path to the source file to generate. The second argument is used as input for the generator. When either the generator source or the sample input changes, the generated.c source will be regenerated. In both of the above cases, the source file named as the OUTPUT argument of the ADD_CUSTOM_COMMAND command will automatically have the GENERATED source file property set to true. The source may then be referenced without the${CMAKE_CURRENT_BINARY_DIR} part of the path. Note that use of the "LOCATION" target property requires CMake 2.0 or higher.

In some cases, the program doing the generation may generate more than one file that needs to be part of the build. In this case, some dummy custom commands must be created to "chain" the outputs so that the files are created in the correct order. For example, suppose you had a program that read input.txt and generated three files output1.cpp, output2.h, and output3.cpp, and that those three files needed to be compiled into an executable program. The cmake list file for that would look like this:

 PROJECT(FOO)
# make sure cmake addes the binary directory for the project to the include path
INCLUDE_DIRECTORIES(${FOO_BINARY_DIR}) # add the executable that will do the generation ADD_EXECUTABLE(my_generator my_generator.cxx) GET_TARGET_PROPERTY(MY_GENERATOR_EXE my_generator LOCATION) # add the custom command that will generate all three files but only specify one of the outputs ADD_CUSTOM_COMMAND(OUTPUT${FOO_BINARY_DIR}/output1.cpp
COMMAND ${MY_GENERATOR_EXE} ARGS${FOO_BINARY_DIR} ${FOO_SOURCE_DIR}/input.txt DEPENDS${MY_GENERATOR_EXE}
MAIN_DEPENDENCY ${FOO_SOURCE_DIR}/input.txt ) # add the second output and run the dummy command echo but make sure that output1.cpp # is the DEPEND for this command. Once output1.cpp exists output2.h will also be created. ADD_CUSTOM_COMMAND(OUTPUT${FOO_BINARY_DIR}/output2.h
COMMAND echo
DEPENDS ${FOO_BINARY_DIR}/output1.cpp ) # do the same thing for output3.cpp ADD_CUSTOM_COMMAND(OUTPUT${FOO_BINARY_DIR}/output3.cpp
COMMAND echo
DEPENDS ${FOO_BINARY_DIR}/output1.cpp ) # now create an executable using the input files ADD_EXECUTABLE(generated${FOO_BINARY_DIR}/output1.cpp
${FOO_BINARY_DIR}/output3.cpp${FOO_SOURCE_DIR}/input.txt)


Generating a header file works similarly. Note that generated headers can often cause unnecessary rebuilds and should be avoided if possible. Consider using the CONFIGURE_FILE command to prepare the header at CMake time. If you must generate a header file, use code like this:

 ADD_CUSTOM_COMMAND(
OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/foo.h COMMAND${CMAKE_COMMAND}
ARGS -E copy ${CMAKE_CURRENT_SOURCE_DIR}/bar.h${CMAKE_CURRENT_BINARY_DIR}/foo.h
DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/bar.h ) SET_SOURCE_FILES_PROPERTIES(foo.c PROPERTIES OBJECT_DEPENDS${CMAKE_CURRENT_BINARY_DIR}/foo.h)


The generation of the header works similarly to the first example above. Since the header does not exist at the time foo.c's dependencies are scanned there is no way for CMake to know that it requires foo.h. The OBJECT_DEPENDS source file property gives CMake this knowledge. This custom command will automatically be placed in the generated build system for any target using a source file with this OBJECT_DEPENDS property.

### How do I use CMake to generate SWIG wrapper libraries?

CMake version 2 supports the generation of SWIG wrapper libraries. The SWIG package defines the following macros: SWIG_ADD_MODULE and SWIG_LINK_LIBRARIES

# This example shows how to use python
# Currently these languages have been tested:
#  perl tcl ruby php4 pike

FIND_PACKAGE(SWIG REQUIRED)
INCLUDE(${SWIG_USE_FILE}) FIND_PACKAGE(PythonLibs) INCLUDE_DIRECTORIES(${PYTHON_INCLUDE_PATH})

INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}) SET(CMAKE_SWIG_FLAGS "") SET_SOURCE_FILES_PROPERTIES(example.i PROPERTIES CPLUSPLUS ON) SET_SOURCE_FILES_PROPERTIES(example.i PROPERTIES SWIG_FLAGS "-includeall") SWIG_ADD_MODULE(example python example.i example.cxx) SWIG_LINK_LIBRARIES(example${PYTHON_LIBRARIES})



### I use EXEC_PROGRAM but the result is not set in subdirectories. Why?

An unfortunate holdover from ancient CMake versions is that certain commands are "inherited" into subdirectories and others are not. EXEC_PROGRAM is not inherited. What this means is that when the listfile code from a parent directory executes in a subdirectory the EXEC_PROGRAM command is left out. Therefore the code executes differently. This problem will be fixed in CMake 2.2, but for now you will have to cache the result:

EXEC_PROGRAM(my-program OUTPUT_VARIABLE MY_OUTPUT)
SET(MY_OUTPUT "${MY_OUTPUT}" CACHE INTERNAL "")  This will store the result in a global location so it will be available in the subdirectory. Be sure to choose a descriptive name for MY_OUTPUT to avoid conflict in the global setting. ### How can I get or set environment variables? CMake names environment variables using an ENV prefix and surrounding the names in curly braces. Here is an example: MESSAGE("$ENV{PATH}")


Reading variables will work in any version of CMake. Writing to them works currently in the development version and will work in the 2.2 release using the following syntax:

SET(ENV{HELLO} "World")


Note that there is currently no way to tell apart an empty environment variable value from a variable that is not set at all.

One should avoid using environment variables for controlling the flow of CMake code (such as in IF commands). The build system generated by CMake may re-run CMake automatically when CMakeLists.txt files change. The environment in which this is executed is controlled by the build system and may not match that in which CMake was originally run. If you want to control build settings on the CMake command line, you need to use cache variables set with the -D option. The settings will be saved in CMakeCache.txt so that they don't have to be repeated every time CMake is run on the same build tree.

## Running CMake

### Is there an option to produce more 'verbose' compiling?

Set CMAKE_VERBOSE_MAKEFILE to ON. This will make generator to produce all outputs, including compiler lines.

If you are on Windows using Borland or NMake Makefiles, then you will see lines like:

cl @c:\DOCUME~1\ANDY~1.KIT\LOCALS~1\Temp\nma03504


The reason for this is that Borland and Microsoft Visual Studio make programs have limitation on the length of command strings. They overcome this limitation by writing arguments to the file and then pass file to the program.

If you actually want to see what the command looks like, set CMAKE_START_TEMP_FILE and CMAKE_END_TEMP_FILE to "".

On Makefile generators, there is a shortcut by setting Makefile variable VERBOSE to 1. For example on UNIX:

make VERBOSE=1


and Windows:

nmake /S  force silent mode,  overrides (CMAKE_VERBOSE_MAKFILE)


### I set a cmake variable in my environment, but it didn't change anything. Why?

CMake build settings are stored in the CMake cache corresponding to a project's build tree. They are called CMake "cache entries" and have no relation to your command shell's environment variables. Use a CMake GUI (CMakeSetup on Windows or ccmake on UNIX) or the wizard mode (cmake -i) to edit cache entries. Initial values may also be specified for a build by using the -D command line argument to cmake when it is first run to produce a new build tree.

### I run an out-of-source build but CMake generates in-source anyway. Why?

This means that there is a CMakeCache.txt file in the source tree, possibly as part of an existing in-source build. If CMake is given the path to a directory with a CMakeCache.txt file, it assumes the directory is a build tree. Therefore if one runs "cmake ../mysrc" to build out-of-source but there is a mysrc/CMakeCache.txt file then cmake will treat mysrc as the build tree.

This is a side-effect of the feature that allows "cmake ." to be used to regenerate a build tree. The behavior will not be changed because mixing in-source and out-of-source builds is not safe anyway (configured headers may be found in the wrong place).

## Platform-specific questions

### How can I apply resources on Mac OSX automatically?

Using ADD_CUSTOM_COMMAND. For example, let's say you are creating executable MyExecutable, which needs the resources file Carbon.r. All you do is add custom rule which is executed after the executable is linked:

ADD_EXECUTABLE(MyExecutable ${MyExecutable_SRCS}) SET(MyExecutable_PATH${EXECUTABLE_OUTPUT_PATH})
IF(NOT MyExecutable_PATH)
SET(MyExecutable_PATH ${CMAKE_CURRENT_BINARY_DIR}) ENDIF(NOT MyExecutable_PATH)  IF(APPLE) FIND_PROGRAM(VTK_APPLE_RESOURCE Rez /Developer/Tools) IF(VTK_APPLE_RESOURCE) ADD_CUSTOM_COMMAND(SOURCE MyExecutable COMMAND${VTK_APPLE_RESOURCE}
ARGS Carbon.r -o


### How Put Files in Folders in Visual Studio Projects

The Visual Studio IDE supports putting files into folders. CMake can be used to put files in folders with the SOURCE_GROUP command.

 SOURCE_GROUP(name [REGULAR_EXPRESSION regex] [FILES src1 src2 ...])


Defines a group into which sources will be placed in project files. This is mainly used to setup file tabs in Visual Studio. Any file whose name is listed or matches the regular expression will be placed in this group. If a file matches multiple groups, the LAST group that explicitly lists the file will be favored, if any. If no group explicitly lists the file, the LAST group whose regular expression matches the file will be favored. For backwards compatibility,this command is also supports the format SOURCE_GROUP(name regex).

### How to create Visual Studio 6 Projects that contain only a single build type

For Visual Studio.NET (version 7.0 and above) it is possible to set the CMAKE_CONFIGURATION_TYPES variable to the build type(s) (Debug/Release/...) that you want. This does not work for Visual Studio 6. There is however a way to achieve this. To create your own set of configurations:

1. Create a directory in which you copy the files *.dsptemplate and CMakeVisualStudio6Configurations.cmake from CMake's Templates directory.
2. Edit the .cmake file and change the SET(CMAKE_CONFIGURATION_TYPES ...) line to set the build types that you want in your set.
3. Edit the *Header.dsptemplate files to contain only the configuration types you want in your set.
4. In your CMakeLists.txt file, set the MSPROJECT_TEMPLATE_DIRECTORY to the directory that you created.


That's it. Run CMake and your new configuration files will be created.

Note: Editing the *Header.dsptemplates files should be done very carefully. Here are some guidelines:

- You MUST remove the targets that you do not want in your set at the bottom of the file (e.g. '# Name "OUTPUT_LIBNAME - Win32 MinSizeRel"') - You can remove the '!IF "$(CFG)" == ...' until '!ELSEIF "$(CFG)" == ...' or '!ELSEIF "$(CFG)" == ...' until '!ENDIF' lines for the configurations you do not want. Make sure that the resulting code still starts with '!IF ...' and ends with '!ENDIF' with any number of '!ELSEIF' sections in between. If you create templates for a single configuration (aka makefile), it is possible to remove everything starting from '!IF' until and including '!ENDIF' and leave only the contents of the relevant section intact. - Do not edit the lines starting with '!MESSAGE' as the changes may - and probably will - corrupt your resulting DSP files. The only thing I was able to change without corrupting the DSP is to remove the irrevant configurations from the "Possible choices for configuration are:" list. If you have only a single configuration in your set, you may want to get rid of the intermediate dir that MsDev creates. You can do that by setting: 1. PROP BASE Output_Dir "" 2. PROP BASE Intermediate_Dir "" 3. PROP Intermediate_Dir "" 4. PROP Output_Dir "LIBRARY_OUTPUT_PATH" or 1. PROP Output_Dir "EXECUTABLE_OUTPUT_PATH" Additionally you should then also edit the '# ADD LINK32' line in the DLLHeader.dsptemplate file. Change for example '/out:"LIBRARY_OUTPUT_PATHDebug/OUTPUT_LIBNAMEDEBUG_POSTFIX.dll"' into '/out:"LIBRARY_OUTPUT_PATHOUTPUT_LIBNAMEDEBUG_POSTFIX.dll"' (Note that the configuration name and also the slash are removed). It is even possible to rename the pre-defined configurations of CMake in this way. Let's say you prefer 'PreProduction' over 'RelWithDebInfo'. You can change the name in the *.dsptemplate files, but you should also change it in the CMakeVisualStudio6Configurations.cmake file. Be careful, however. Only entries relevant to the configuration name should be changed. Do not change the /debug options and the entries that contain the build type in capital characters. Internally in CMake the build type will still remain 'RelWithDebInfo', so also the CMAKE_BUILD_TYPE should be set to the old value. You can only change the way it is named in MSDev. Note: Apparently MsDev as command-line build tool only performs a partial check on the build type. It will match all configuration types that CONTAIN the build type in their name. (e.g. if you have renamed RelWithDebInfo to DebugRelease, Debug will build Debug and DebugRelease, Release will build Release and DebugRelease. This may be exactly what you want, but be warned.) ## Miscellaneous questions ### How do I use CMake to build LaTeX documents? Use the following approach. Note that you have to set LATEX_COMPILE to LaTeX executable, DVIPDF_COMPILE to dvi to pdf converter. Also, the LaTeX source is TDocument.tex and the result is called TDocument.pdf. Note that this uses commands in CMake version 1.8 or later. PROJECT(Document) IF(LATEX_COMPILE) ADD_CUSTOM_COMMAND( OUTPUT${Document_BINARY_DIR}/TDocument.dvi
DEPENDS   ${Document_BINARY_DIR}/TDocument.tex COMMAND${LATEX_COMPILE}
ARGS      ${Document_SOURCE_DIR}/TDocument.tex ) ENDIF(LATEX_COMPILE) IF(DVIPDF_COMPILE) ADD_CUSTOM_COMMAND( OUTPUT${Document_BINARY_DIR}/TDocument.pdf
DEPENDS   ${Document_BINARY_DIR}/TDocument.dvi COMMAND${DVIPDF_COMPILE}
ARGS      ${Document_SOURCE_DIR}/TDocument.dvi ) ENDIF(DVIPDF_COMPILE)  ADD_CUSTOM_TARGET(LaTeXDocument ALL echo DEPENDS${Document_BINARY_DIR}/TDocument.pdf
)


The following uses commands in CMake version 2.0 and later

PROJECT(Document)
#
# Find LaTeX
#
FIND_PACKAGE(LATEX)

IF(LATEX_COMPILER)
OUTPUT    ${Document_BINARY_DIR}/TDocument.dvi COMMAND${LATEX_COMPILER}
ARGS      ${Document_SOURCE_DIR}/TDocument.tex DEPENDS${Document_SOURCE_DIR}/TDocument.tex
COMMENT   "Tex2dvi"
)

  IF(DVIPS_CONVERTER)
OUTPUT    ${Document_BINARY_DIR}/TDocument.ps COMMAND${DVIPS_CONVERTER}
ARGS      ${Document_BINARY_DIR}/TDocument.dvi -o${Document_BINARY_DIR}/TDocument.ps
DEPENDS   ${Document_BINARY_DIR}/TDocument.dvi COMMENT "dvi2ps" ) IF(PS2PDF_CONVERTER) ADD_CUSTOM_COMMAND( OUTPUT${Document_BINARY_DIR}/TDocument.pdf
COMMAND   ${PS2PDF_CONVERTER} ARGS${Document_BINARY_DIR}/TDocument.ps
DEPENDS   ${Document_BINARY_DIR}/TDocument.ps COMMENT "ps2pdf" )   ADD_CUSTOM_TARGET(LaTeXDocument ALL echo DEPENDS${Document_BINARY_DIR}/TDocument.pdf
)
ENDIF(PS2PDF_CONVERTER)
ENDIF(DVIPS_CONVERTER)
ENDIF(LATEX_COMPILER)


### How do I get LaTeX references to be correct?

When your latex document contains references (e.g. \ref{...} command) you get to run two passes of latex. In the most general case, i.e. when additionally your document uses a bibtex bibliography, you shall need three passes of latex (and one pass of bibtex):

1. latex (first pass: for bibtex to have an .aux file)
2. bibtex (for generating the .bbl file)
3. latex (second pass)
4. latex (third pass)

The following code snippet illustrates how you can "pervert" the bibtex and latex generated auxilary files (.aux, .log, .dvi, .bbl...) to create an "artificial" set of CMake dependencies. The side-effect of those dependencies should hopefully be the above described sequence of calls to latex and bibtex

ADD_CUSTOM_COMMAND(
OUTPUT    ${CMAKE_CURRENT_BINARY_DIR}/UsersManual.aux DEPENDS${CMAKE_CURRENT_SOURCE_DIR}/UsersManual.tex
COMMAND   ${LATEX_COMPILER} ARGS -interaction=batchmode${CMAKE_CURRENT_BINARY_DIR}/UsersManual
COMMENT   "Latex (first pass)"
)

OUTPUT    ${CMAKE_CURRENT_BINARY_DIR}/UsersManual.bbl DEPENDS${CMAKE_CURRENT_BINARY_DIR}/UsersManual.aux
COMMAND   ${BIBTEX_COMPILER} ARGS -terse${CMAKE_CURRENT_BINARY_DIR}/UsersManual
COMMENT   "Bibtex"
)

OUTPUT    ${CMAKE_CURRENT_BINARY_DIR}/UsersManual.dvi DEPENDS${CMAKE_CURRENT_BINARY_DIR}/UsersManual.bbl
COMMAND   ${LATEX_COMPILER} ARGS -interaction=batchmode${CMAKE_CURRENT_BINARY_DIR}/UsersManual
COMMENT   "Latex (second pass)"
)

OUTPUT    ${CMAKE_CURRENT_BINARY_DIR}/UsersManual.log DEPENDS${CMAKE_CURRENT_BINARY_DIR}/UsersManual.bbl
${CMAKE_CURRENT_BINARY_DIR}/UsersManual.dvi COMMAND${LATEX_COMPILER}
ARGS      -interaction=batchmode ${CMAKE_CURRENT_BINARY_DIR}/UsersManual COMMENT "Latex (third pass)" ) # Eventually trigger the whole process ADD_CUSTOM_TARGET(LaTeXDocument ALL echo DEPENDS${CMAKE_CURRENT_BINARY_DIR}/UsersManual.log
)


### How can I set TEXINPUTS for a LaTeX compilation?

First note that most often you can avoid using TEXINPUTS by copying all the necessary files (.tex source file and included graphic files e.g. .eps files) from your PROJECT_SOURCE_DIR hirarchy to your PROJECT_BINARY_DIR subdir [refer to CONFIGURE_FILE with the COPYONLY flag set for copying files]. Since by default latex uses the current working directory as value for TEXINPUTS you should be all set. As expected, this trick is quick AND dirty since your concerned PROJECT_BINARY_DIR subdir now contains files that are NOT generated by CMake (in the sense that those files are not the result of a system command but were merely duplicated)...

If you consider it is cleaner or easier to define a TEXINPUTS environment variable [the latex command probably misses a -I flag] you can find an example in the InsightDocuments cvs archive (refer to the section "cvs access" near the bottom of Kitware's ITK download page) or use google with keywords "ITK_TEXINPUTS CONFIGURE_FILE". Look at InsightDocuments/CourseWare/Training/Vis2003/Latex/CMakeLists.txt and search for e.g. "LaTeXWrapper.sh.in".

Roughly the mecanism goes:

• SET ITK_TEXINPUTS with the desired TEXINPUTS
• CONFIGURE_FILE "InsightDocuments/CourseWare/Training/Vis2003/LaTeXWrapper.sh.in" which generates an sh shell script setting the shell variable TEXINPUTS prior to running the latex command
• use ADD_CUSTOM_COMMAND to invoke this shell script

This very example is Win32 portable (except that LaTeXWrapper.bat.in generates a .bat shell script)

### How do I rename library after it is created?

Let say you do are creating library named Foo to the new name Bar. Foo is created with command: ADD_LIBRARY(Foo SHARED ${Foo_sources}) The following will rename the library after it is created (requires CMake 1.8 or later):  # Set the existing library name: SET(LIB_NAME${CMAKE_SHARED_LIBRARY_PREFIX}Foo${CMAKE_SHARED_LIBRARY_SUFFIX}) # Set new library name: SET(NEW_LIB_NAME${CMAKE_SHARED_LIBRARY_PREFIX}Bar${CMAKE_SHARED_LIBRARY_SUFFIX}) # Copy: ADD_CUSTOM_COMMAND( TARGET Foo POST_BUILD COMMAND${CMAKE_COMMAND}
ARGS -E copy
${LIBRARY_OUTPUT_PATH}/${CMAKE_CFG_INTDIR}/${LIB_NAME}${LIBRARY_OUTPUT_PATH}/${CMAKE_CFG_INTDIR}/${NEW_LIB_NAME}
)


### In CCMake, typing full paths is tedious. Is there a better way?

Since CMake 1.6, you can use tab completion in the path entries in CCMake. All you do is type first couple of characters and press <TAB> key. CCMake will examine the current typed path and try to expand it to some existing path. If that is possible, it will do it. If not, it will not do anything.

For example:

/usr/loc<TAB>


will expand to

/usr/local/


### Which regular expressions are supported by cmake?

The MATCHES and MATCHALL uses a regular expression, not a wild card. Here are the meanings of the metacharacters in the cmake regular expression:

^ Matches at beginning of a line
$Matches at end of a line . Matches any single character [ ] Matches any character(s) inside the brackets [^ ] Matches any character(s) not inside the brackets - Matches any character in range on either side of a dash * Matches preceding pattern zero or more times + Matches preceding pattern one or more times ? Matches preceding pattern zero or once only () Saves a matched expression and uses it in a later match  example: "[-][L]([^ ;])+" matches all strings beginning with -L and ending with a space or a semicolon, the usual linkdirs under Linux. ### Why does CMake use full paths, or can I copy my build tree? CMake uses full paths because: 1. configured header files may have full paths in them, and moving those files without re-configuring would cause upredicatble behavior. 2. because cmake supports out of source builds, if custom commands used relative paths to the source tree, the would not work when they are run in the build tree because the current directory would be incorrect. 3. on Unix systems rpaths are built into executables so they can find shared libraries at run time. If the build tree is moved old executables may use the old shared libraries, and not the new ones. Can the build tree be copied: The short answer is NO. The reason is because full paths are used in CMake, see above. The main problem is that cmake would need to detect when the binary tree has been moved. However, cmake is not run every time a build is done. Currently (cmake 1.6.X, and cmake 1.7.x ) do not support fixing a moved binary tree. This feature may be added before 1.8. If that feature were added, it would still require cmake to be re-run by hand each time a build tree is moved. ### CMake does not generate a "make distclean" target. Why? CMake generates many files related to the build system, but since CMakeLists.txt files can run scripts and other arbitrary commands, there is no way it can keep track of exactly which files are generated as part of running CMake. Providing a distclean target would give users the false impression that it would work as expected. There is a "make clean" target that will remove files generated by the compiler and linker. A "make distclean" target is only necessary if the user performs an in-source build. CMake supports in-source builds, but we strongly encourage users to adopt the notion of an out-of-source build. Using a build tree that is separate from the source tree will prevent CMake from generating any files in the source tree. Since the source tree is never changed, no distclean target is needed. A fresh build can be achieved by removing the build tree or creating a separate build tree. ### Does CMake's "make install" support DESTDIR? Yes, when a makefile generator is used. After the build completes, one may run "make install" to install any files the project configured to be installed. Running make install DESTDIR="/home/me/mydist"  will cause the installation to copy files to "/home/me/mydist/PREFIX/...". This is useful for package maintainers. ### Running "make clean" does not remove custom command outputs. Why? Since CMake 2.0 developer can specify a list of files to be deleted. This can be done using SET_DIRECTORY_PROPERTIES setting property ADDITIONAL_MAKE_CLEAN_FILES to the list of files. We however strongly recommend using an "out-of-source" build which never writes any files to the source tree. Using a separate source and build tree greatly reduces the need for "make clean" and "make distclean" targets. Please see question 5.6 for more details. ### Can I do make uninstall with CMake? By default CMake does not provide uninstall target. This is done for security reasons, since uninstalling can potentially remove some useful files from the system. That said, nobody prevents you from providing uninstall target in your project. To do that, you need to create CMake script that will remove files. Create file cmake_uninstall.cmake.in in the toplevel directory of the project: IF(NOT EXISTS "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt") MESSAGE(FATAL_ERROR "Cannot find install manifest: \"@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt\"") ENDIF(NOT EXISTS "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt") FILE(READ "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt" files) STRING(REGEX REPLACE "\n" ";" files "${files}")
FOREACH(file ${files}) MESSAGE(STATUS "Uninstalling \"${file}\"")
IF(NOT EXISTS "${file}") MESSAGE(FATAL_ERROR "File \"${file}\" does not exists.")
ENDIF(NOT EXISTS "${file}") EXEC_PROGRAM("@CMAKE_COMMAND@" ARGS "-E remove \"${file}\""
OUTPUT_VARIABLE rm_out
RETURN_VARIABLE rm_retval)
IF("${rm_retval}" GREATER 0) MESSAGE(FATAL_ERROR "Problem when removing \"${file}\"")
ENDIF("${rm_retval}" GREATER 0) ENDFOREACH(file)  Then in the toplevel CMakeLists.txt add the following logic: CONFIGURE_FILE( "${CMAKE_CURRENT_SOURCE_DIR}/cmake_uninstall.cmake.in"
"${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" IMMEDIATE @ONLY) ADD_CUSTOM_TARGET(uninstall "${CMAKE_COMMAND}" -P "\${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake")


Now you will have uninstall target in the toplevel directory of your binary tree.

### How can I avoid the error "Arg list too long" when running make?

This error is sometimes encountered when building a static library with many object files using make. It typically looks something like this:

gmake[2]: execvp: /bin/sh: Arg list too long


When make tries to run the archiver program to build the static library the shell it uses complains that the argument list is too long. In some shells this can be fixed by setting an environment variable such as ARG_MAX to extend the length of the command line it will allow.

 CMake: [Welcome | Site Map]