CmakeEldk: Difference between revisions

From KitwarePublic
Jump to navigationJump to search
No edit summary
(Replace content with link to new CMake community wiki)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
= How to use a Linux-to-Linux cross compiling GNU toolchain =
{{CMake/Template/Moved}}


Linux is in widespread use in embedded systems and handheld devices. There are many commercial
This page has moved [https://gitlab.kitware.com/cmake/community/wikis/doc/cmake/cross_compiling/Eldk here].
and non-commercial projects which provide cross compiling toolchains, one of these
is [http://www.denx.de Denx], which offer the [http://www.denx.de/wiki/DULG/ELDK Embedded Linux Development Kit],
short ELDK. ELDK supports PowerPC, ARM and MIPS as target systems, it consists of the cross compiling toolchains and
the quite complete target environment.
ELDK shouldn't be much different from other cross compiling toolchains, so the information presented here should be usable also for other Linux-to-Linux cross compiling toolchains.
 
== Installing ELDK ==
 
You can find installation instructions at http://www.denx.de/wiki/view/DULG/ELDKDownloadPowerPC ,  the
packages are available at ftp://ftp.sunet.se/pub/Linux/distributions/eldk/ .
E.g. if your target has a MIPS processor, you will download the files you can find in
ftp://ftp.sunet.se/pub/Linux/distributions/eldk/4.1/mips-linux-x86/iso . The easiest way to use them is to mount
these ISO files and then install ELDK using the ''install'' executable you will find there:
<pre>
~/ $ mkdir mount-iso/
~/ $ sudo mount -tiso9660 mips-2007-01-21.iso mount-iso/ -o loop
~/ $ cd mount-iso/
~/mount-iso/$ ./install -d /home/alex/eldk-mips/
...
Preparing...                ########################################### [100%]
  1:appWeb-mips_4KCle      ########################################### [100%]
Done
~/mount-iso/$ ls eldk-mips/
bin  eldk_init  etc  mips_4KC  mips_4KCle  usr  var  version
</pre>
 
In eldk-mips/mips_4KC/ and eldk-mips/mips_4KCle/ the target environments have been installed, i.e. complete Linux
filesystems for the target platforms. In eldk-mips/bin/, eldk-mips/usr/ etc. host side tools
have been installed, so the cross compiler can be found in eldk-mips/usr/bin/mips-linux-gcc.
 
 
== Writing a CMake toolchain file ==
 
For CMake to be able to crosscompile software, it requires you to write a toolchain file, which tells CMake
some information about the toolchain.
With the examples used above it will look like:
<pre>
# the name of the target operating system
SET(CMAKE_SYSTEM_NAME Linux)
 
# which C and C++ compiler to use
SET(CMAKE_C_COMPILER  /home/alex/eldk-mips/usr/bin/mips_4KC-gcc)
SET(CMAKE_CXX_COMPILER /home/alex/eldk-mips/usr/bin/mips_4KC-g++)
 
# here is the target environment located
SET(CMAKE_FIND_ROOT_PATH  /home/alex/eldk-mips/mips_4KC /home/alex/eldk-mips-extra-install )
 
# adjust the default behaviour of the FIND_XXX() commands:
# search headers and libraries in the target environment, search
# programs in the host environment
set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)
</pre>
 
Save this file as Toolchain-eldk-mips4KC.cmake to some location where you will put
all your toolchain files, e.g. $HOME.
 
== Building the software for ELDK ==
 
Let's say you have the classical hello world software with a CMake based buildsystem and want to build this for ELDK.
main.c:
<pre>
include <stdio.h>
 
int main()
{
  printf("Hello world\n");
  return 0;
}
</pre>
 
CMakeLists.txt:
<pre>
ADD_EXECUTABLE(hello main.c)
INSTALL(TARGETS hello DESTINATION bin)
</pre>
 
Then run CMake on it to generate the buildfiles, the important point is that you tell it to use the toochain file you just wrote:
<pre>
~/src/helloworld/ $ mkdir build
~/src/helloworld/ $ cd build
~/src/helloworld/build/ $ cmake -DCMAKE_TOOLCHAIN_FILE=~/Toolchain-eldk-mips4KC.cmake -DCMAKE_INSTALL_PREFIX=/home/alex/eldk-mips-extra-install ..
-- Configuring done
-- Generating done
-- Build files have been written to: /home/alex/src/helloworld/build
~/src/helloworld/build/ $ make
Scanning dependencies of target hello
[100%] Building C object CMakeFiles/hello.dir/main.o
Linking C executable hello
[100%] Built target hello
~/src/helloworld/build/ $ make install
...
-- Installing /home/alex/eldk-mips-extra-install/bin/hello
</pre>
 
So that's all. It actually doesn't matter whether it's just a "hello world" or some complex piece of software,
the only difference is the usage of the toolchain file. If the software has all required configure checks, it should just
build also for ELDK.
 
[[Category:CMake]]

Latest revision as of 15:41, 30 April 2018


The CMake community Wiki has moved to the Kitware GitLab Instance.

This page has moved here.