dox/IO/vtkXMLWriterC.h File Reference

#include "vtkType.h"

Include dependency graph for vtkXMLWriterC.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Defines

#define VTK_XML_EXPORT

Typedefs

typedef struct vtkXMLWriterC_s vtkXMLWriterC
 vtkXMLWriterC is an opaque structure holding the state of an individual writer object.

Functions

VTK_XML_EXPORT vtkXMLWriterCvtkXMLWriterC_New ()
 Create a new instance of vtkXMLWriterC.
VTK_XML_EXPORT void vtkXMLWriterC_Delete (vtkXMLWriterC *self)
 Delete the writer object.
VTK_XML_EXPORT void vtkXMLWriterC_SetDataObjectType (vtkXMLWriterC *self, int objType)
 Set the VTK data object type that will be written.
VTK_XML_EXPORT void vtkXMLWriterC_SetDataModeType (vtkXMLWriterC *self, int datamodetype)
 Set the VTK writer data mode to either:
  • Ascii
  • Binary
  • Appended (default).

VTK_XML_EXPORT void vtkXMLWriterC_SetExtent (vtkXMLWriterC *self, int extent[6])
 Set the extent of a structured data set.
VTK_XML_EXPORT void vtkXMLWriterC_SetPoints (vtkXMLWriterC *self, int dataType, void *data, vtkIdType numPoints)
 Set the points of a point data set.
VTK_XML_EXPORT void vtkXMLWriterC_SetOrigin (vtkXMLWriterC *self, double origin[3])
 Set the origin of an image data set.
VTK_XML_EXPORT void vtkXMLWriterC_SetSpacing (vtkXMLWriterC *self, double spacing[3])
 Set the spacing of an image data set.
VTK_XML_EXPORT void vtkXMLWriterC_SetCoordinates (vtkXMLWriterC *self, int axis, int dataType, void *data, vtkIdType numCoordinates)
 Set the coordinates along one axis of a rectilinear grid data set.
VTK_XML_EXPORT void vtkXMLWriterC_SetCellsWithType (vtkXMLWriterC *self, int cellType, vtkIdType ncells, vtkIdType *cells, vtkIdType cellsSize)
 Set a cell array on the data object to be written.
VTK_XML_EXPORT void vtkXMLWriterC_SetCellsWithTypes (vtkXMLWriterC *self, int *cellTypes, vtkIdType ncells, vtkIdType *cells, vtkIdType cellsSize)
 Set a cell array on the data object to be written.
VTK_XML_EXPORT void vtkXMLWriterC_SetPointData (vtkXMLWriterC *self, const char *name, int dataType, void *data, vtkIdType numTuples, int numComponents, const char *role)
 Set a point or cell data array by name.
VTK_XML_EXPORT void vtkXMLWriterC_SetCellData (vtkXMLWriterC *self, const char *name, int dataType, void *data, vtkIdType numTuples, int numComponents, const char *role)
VTK_XML_EXPORT void vtkXMLWriterC_SetFileName (vtkXMLWriterC *self, const char *fileName)
 Set the name of the file into which the data are to be written.
VTK_XML_EXPORT int vtkXMLWriterC_Write (vtkXMLWriterC *self)
 Write the data to a file immediately.
VTK_XML_EXPORT void vtkXMLWriterC_SetNumberOfTimeSteps (vtkXMLWriterC *self, int numTimeSteps)
 Set the number of time steps that will be written between upcoming Start and Stop calls.
VTK_XML_EXPORT void vtkXMLWriterC_Start (vtkXMLWriterC *self)
 Start writing a time-series to the output file.
VTK_XML_EXPORT void vtkXMLWriterC_WriteNextTimeStep (vtkXMLWriterC *self, double timeValue)
 Write one time step of a time-series to the output file.
VTK_XML_EXPORT void vtkXMLWriterC_Stop (vtkXMLWriterC *self)
 Stop writing a time-series to the output file.


Define Documentation

#define VTK_XML_EXPORT

Definition at line 28 of file vtkXMLWriterC.h.


Typedef Documentation

typedef struct vtkXMLWriterC_s vtkXMLWriterC

vtkXMLWriterC is an opaque structure holding the state of an individual writer object.

It can be used to write VTK XML files.

Definition at line 40 of file vtkXMLWriterC.h.


Function Documentation

VTK_XML_EXPORT vtkXMLWriterC* vtkXMLWriterC_New (  ) 

Create a new instance of vtkXMLWriterC.

Returns the object or NULL on failure.

VTK_XML_EXPORT void vtkXMLWriterC_Delete ( vtkXMLWriterC self  ) 

Delete the writer object.

This should not be called between Start and Stop calls.

VTK_XML_EXPORT void vtkXMLWriterC_SetDataObjectType ( vtkXMLWriterC self,
int  objType 
)

Set the VTK data object type that will be written.

This initializes an empty data object of the given type.

This must be set before setting geometry or data information can can be set only once per writer object.

VTK_XML_EXPORT void vtkXMLWriterC_SetDataModeType ( vtkXMLWriterC self,
int  datamodetype 
)

Set the VTK writer data mode to either:

  • Ascii
  • Binary
  • Appended (default).

This may be used only after SetDataObjectType has been called.

VTK_XML_EXPORT void vtkXMLWriterC_SetExtent ( vtkXMLWriterC self,
int  extent[6] 
)

Set the extent of a structured data set.

This may be used only after SetDataObjectType has been called with a structured data object type.

VTK_XML_EXPORT void vtkXMLWriterC_SetPoints ( vtkXMLWriterC self,
int  dataType,
void *  data,
vtkIdType  numPoints 
)

Set the points of a point data set.

For structured data, the number of points must match number of points indicated by the extent.

Use dataType to specify the scalar type used in the given array. The data array must have numPoints*3 entries specifying 3-D points.

This may not be used for data objects with implicit points. It may not be called before SetDataObjectType or between Start and Stop calls.

VTK_XML_EXPORT void vtkXMLWriterC_SetOrigin ( vtkXMLWriterC self,
double  origin[3] 
)

Set the origin of an image data set.

This may only be used for image data. It may not be called before SetDataObjectType or between Start and Stop calls.

VTK_XML_EXPORT void vtkXMLWriterC_SetSpacing ( vtkXMLWriterC self,
double  spacing[3] 
)

Set the spacing of an image data set.

This may only be used for image data. It may not be called before SetDataObjectType or between Start and Stop calls.

VTK_XML_EXPORT void vtkXMLWriterC_SetCoordinates ( vtkXMLWriterC self,
int  axis,
int  dataType,
void *  data,
vtkIdType  numCoordinates 
)

Set the coordinates along one axis of a rectilinear grid data set.

Specify axis 0 for X, 1 for Y, and 2 for Z. Use dataType to specify the scalar type used in the given data array. Use numCoordinates to specify the number of such values in the array. The number of values must match that specified by the extent for the given axis.

This may only be used for rectilinear grids. It may not be called before SetDataObjectType or between Start and Stop calls.

VTK_XML_EXPORT void vtkXMLWriterC_SetCellsWithType ( vtkXMLWriterC self,
int  cellType,
vtkIdType  ncells,
vtkIdType cells,
vtkIdType  cellsSize 
)

Set a cell array on the data object to be written.

All cells must have the same type.

For unstructured grid data objects, the cellType can be any type. For polygonal data objects, the cellType must be VTK_VERTEX, VTK_POLY_VERTEX, VTK_LINE, VTK_POLY_LINE, VTK_TRIANGLE, VTK_TRIANGLE_STRIP, or cyclically connected simple cell type such as VTK_POLYGON.

The cells array must have cellsSize entries. Each cell uses N+1 entries where N is the number of points in the cell. The layout of the array for each cell is "[N,id1,id2,...,idN]". The total number of cells must be ncells.

This may only be used for unstructured grid and polygonal data types. It may not be called before SetDataObjectType or between Start and Stop calls.

VTK_XML_EXPORT void vtkXMLWriterC_SetCellsWithTypes ( vtkXMLWriterC self,
int *  cellTypes,
vtkIdType  ncells,
vtkIdType cells,
vtkIdType  cellsSize 
)

Set a cell array on the data object to be written.

Each cell can have its own type.

The cellTypes array specifies the type of each cell, and has ncells entries. The cells array must have cellsSize entries. Each cell uses N+1 entries where N is the number of points in the cell. The layout of the array for each cell is "[N,id1,id2,...,idN]". The total number of cells must be ncells.

This may only be used for unstructured grid data objects. It may not be called before SetDataObjectType or between Start and Stop calls.

VTK_XML_EXPORT void vtkXMLWriterC_SetPointData ( vtkXMLWriterC self,
const char *  name,
int  dataType,
void *  data,
vtkIdType  numTuples,
int  numComponents,
const char *  role 
)

Set a point or cell data array by name.

The name of the array is required and should describe the purpose of the data. Use dataType to specify the scalar type used in the given data array. Use numTuples to specify the number of tuples and numComponents to specify the number of scalar components in each tuple.

The data array must have exactly numTuples*numComponents entries. For SetPointData, numTuples must be equal to the number of points indicated by SetExtent and/or SetPoints. For SetCellData, numTuples must be equal to the total number of cells set by SetCells.

The role can be one of "SCALARS", "VECTORS", "NORMALS", "TENSORS", or "TCOORDS" and specifies that the array should be designated as the active array for the named role. Other values for role are ignored.

This may be used for all data types. It may not be called before SetDataObjectType but may be called between Start and Stop calls.

VTK_XML_EXPORT void vtkXMLWriterC_SetCellData ( vtkXMLWriterC self,
const char *  name,
int  dataType,
void *  data,
vtkIdType  numTuples,
int  numComponents,
const char *  role 
)

VTK_XML_EXPORT void vtkXMLWriterC_SetFileName ( vtkXMLWriterC self,
const char *  fileName 
)

Set the name of the file into which the data are to be written.

This may be used for all data types. It may not be called before SetDataObjectType or between Start and Stop calls.

VTK_XML_EXPORT int vtkXMLWriterC_Write ( vtkXMLWriterC self  ) 

Write the data to a file immediately.

This is not used when writing time-series data. Returns 1 for success and 0 for failure.

This may only be called after SetFileName and SetDataObjectType.

VTK_XML_EXPORT void vtkXMLWriterC_SetNumberOfTimeSteps ( vtkXMLWriterC self,
int  numTimeSteps 
)

Set the number of time steps that will be written between upcoming Start and Stop calls.

This is used when writing time-series data.

This may be used for all data types. It may not be called before SetDataObjectType or between Start and Stop calls.

VTK_XML_EXPORT void vtkXMLWriterC_Start ( vtkXMLWriterC self  ) 

Start writing a time-series to the output file.

This may only be called after SetFileName, SetDataObjectType, and SetNumberOfTimeSteps. It may not be called a second time until after an intervening call to Stop.

VTK_XML_EXPORT void vtkXMLWriterC_WriteNextTimeStep ( vtkXMLWriterC self,
double  timeValue 
)

Write one time step of a time-series to the output file.

The current data set by SetPointData and SetCellData will be written.

Use timeValue to specify the time associated with the time step being written.

This may only be called after Start has been called. It should be called NumberOfTimeSteps times before calling Stop.

VTK_XML_EXPORT void vtkXMLWriterC_Stop ( vtkXMLWriterC self  ) 

Stop writing a time-series to the output file.

This may only be called after Start and NumberOfTimeSteps calls to WriteNextTimeStep.


Generated on Wed Aug 24 11:22:50 2011 for VTK by  doxygen 1.5.6