|
| void | SetKernel7x7 (const double kernel[49]) |
| |
| double * | GetKernel7x7 () |
| |
| void | GetKernel7x7 (double kernel[49]) |
| |
| void | SetKernel3x3x3 (const double kernel[27]) |
| | Set the kernel to be a 3x3x3 or 5x5x5 or 7x7x7 kernel. More...
|
| |
| void | SetKernel5x5x5 (const double kernel[125]) |
| |
| void | SetKernel7x7x7 (const double kernel[343]) |
| |
| double * | GetKernel5x5x5 () |
| |
| void | GetKernel5x5x5 (double kernel[125]) |
| |
| double * | GetKernel7x7x7 () |
| |
| void | GetKernel7x7x7 (double kernel[343]) |
| |
|
| virtual int * | GetKernelSize () |
| | Get the kernel size. More...
|
| |
| virtual void | GetKernelSize (int &, int &, int &) |
| | Get the kernel size. More...
|
| |
| virtual void | GetKernelSize (int[3]) |
| | Get the kernel size. More...
|
| |
|
| void | SetKernel3x3 (const double kernel[9]) |
| | Set the kernel to be a given 3x3 or 5x5 or 7x7 kernel. More...
|
| |
| void | SetKernel5x5 (const double kernel[25]) |
| | Set the kernel to be a given 3x3 or 5x5 or 7x7 kernel. More...
|
| |
|
| double * | GetKernel3x3 () |
| | Return an array that contains the kernel. More...
|
| |
| void | GetKernel3x3 (double kernel[9]) |
| | Return an array that contains the kernel. More...
|
| |
| double * | GetKernel5x5 () |
| | Return an array that contains the kernel. More...
|
| |
| void | GetKernel5x5 (double kernel[25]) |
| | Return an array that contains the kernel. More...
|
| |
|
| double * | GetKernel3x3x3 () |
| | Return an array that contains the kernel. More...
|
| |
| void | GetKernel3x3x3 (double kernel[27]) |
| | Return an array that contains the kernel. More...
|
| |
| vtkThreadedImageAlgorithm * | NewInstance () const |
| |
| virtual void | ThreadedExecute (vtkImageData *inData, vtkImageData *outData, int extent[6], int threadId) |
| |
| virtual int | SplitExtent (int splitExt[6], int startExt[6], int num, int total) |
| | Putting this here until I merge graphics and imaging streaming. More...
|
| |
| virtual bool | GetEnableSMP () |
| | Enable/Disable SMP for threading. More...
|
| |
| virtual void | SetEnableSMP (bool) |
| | Enable/Disable SMP for threading. More...
|
| |
| virtual void | SetMinimumPieceSize (int, int, int) |
| | The minimum piece size when volume is split for execution. More...
|
| |
| virtual void | SetMinimumPieceSize (int[3]) |
| | The minimum piece size when volume is split for execution. More...
|
| |
| virtual int * | GetMinimumPieceSize () |
| | The minimum piece size when volume is split for execution. More...
|
| |
| virtual void | GetMinimumPieceSize (int &, int &, int &) |
| | The minimum piece size when volume is split for execution. More...
|
| |
| virtual void | GetMinimumPieceSize (int[3]) |
| | The minimum piece size when volume is split for execution. More...
|
| |
| virtual void | SetDesiredBytesPerPiece (vtkIdType) |
| | The desired bytes per piece when volume is split for execution. More...
|
| |
| virtual vtkIdType | GetDesiredBytesPerPiece () |
| | The desired bytes per piece when volume is split for execution. More...
|
| |
| virtual void | SetSplitMode (int) |
| | Set the method used to divide the volume into pieces. More...
|
| |
| void | SetSplitModeToSlab () |
| | Set the method used to divide the volume into pieces. More...
|
| |
| void | SetSplitModeToBeam () |
| | Set the method used to divide the volume into pieces. More...
|
| |
| void | SetSplitModeToBlock () |
| | Set the method used to divide the volume into pieces. More...
|
| |
| virtual int | GetSplitMode () |
| | Set the method used to divide the volume into pieces. More...
|
| |
| virtual void | SetNumberOfThreads (int) |
| | Get/Set the number of threads to create when rendering. More...
|
| |
| virtual int | GetNumberOfThreads () |
| | Get/Set the number of threads to create when rendering. More...
|
| |
| vtkImageAlgorithm * | NewInstance () const |
| |
| int | ProcessRequest (vtkInformation *, vtkInformationVector **, vtkInformationVector *) override |
| | Process a request from the executive. More...
|
| |
| vtkImageData * | GetOutput () |
| | Get the output data object for a port on this algorithm. More...
|
| |
| vtkImageData * | GetOutput (int) |
| | Get the output data object for a port on this algorithm. More...
|
| |
| virtual void | SetOutput (vtkDataObject *d) |
| | Get the output data object for a port on this algorithm. More...
|
| |
| void | SetInputData (vtkDataObject *) |
| | Assign a data object as input. More...
|
| |
| void | SetInputData (int, vtkDataObject *) |
| | Assign a data object as input. More...
|
| |
| vtkDataObject * | GetInput (int port) |
| | Get a data object for one of the input port connections. More...
|
| |
| vtkDataObject * | GetInput () |
| | Get a data object for one of the input port connections. More...
|
| |
| vtkImageData * | GetImageDataInput (int port) |
| | Get a data object for one of the input port connections. More...
|
| |
| virtual void | AddInputData (vtkDataObject *) |
| | Assign a data object as input. More...
|
| |
| virtual void | AddInputData (int, vtkDataObject *) |
| | Assign a data object as input. More...
|
| |
| vtkAlgorithm * | NewInstance () const |
| |
| int | HasExecutive () |
| | Check whether this algorithm has an assigned executive. More...
|
| |
| vtkExecutive * | GetExecutive () |
| | Get this algorithm's executive. More...
|
| |
| virtual void | SetExecutive (vtkExecutive *executive) |
| | Set this algorithm's executive. More...
|
| |
| int | ProcessRequest (vtkInformation *request, vtkCollection *inInfo, vtkInformationVector *outInfo) |
| | Version of ProcessRequest() that is wrapped. More...
|
| |
| virtual int | ComputePipelineMTime (vtkInformation *request, vtkInformationVector **inInfoVec, vtkInformationVector *outInfoVec, int requestFromOutputPort, vtkMTimeType *mtime) |
| | A special version of ProcessRequest meant specifically for the pipeline modified time request. More...
|
| |
| virtual int | ModifyRequest (vtkInformation *request, int when) |
| | This method gives the algorithm a chance to modify the contents of a request before or after (specified in the when argument) it is forwarded. More...
|
| |
| vtkInformation * | GetInputPortInformation (int port) |
| | Get the information object associated with an input port. More...
|
| |
| vtkInformation * | GetOutputPortInformation (int port) |
| | Get the information object associated with an output port. More...
|
| |
| int | GetNumberOfInputPorts () |
| | Get the number of input ports used by the algorithm. More...
|
| |
| int | GetNumberOfOutputPorts () |
| | Get the number of output ports provided by the algorithm. More...
|
| |
| void | UpdateProgress (double amount) |
| | Update the progress of the process object. More...
|
| |
| virtual void | SetInputArrayToProcess (int idx, int port, int connection, const char *fieldAssociation, const char *attributeTypeorName) |
| | String based versions of SetInputArrayToProcess(). More...
|
| |
| vtkInformation * | GetInputArrayInformation (int idx) |
| | Get the info object for the specified input array to this algorithm. More...
|
| |
| void | RemoveAllInputs () |
| | Remove all the input data. More...
|
| |
| vtkDataObject * | GetOutputDataObject (int port) |
| | Get the data object that will contain the algorithm output for the given port. More...
|
| |
| vtkDataObject * | GetInputDataObject (int port, int connection) |
| | Get the data object that will contain the algorithm input for the given port and given connection. More...
|
| |
| virtual void | RemoveInputConnection (int port, vtkAlgorithmOutput *input) |
| | Remove a connection from the given input port index. More...
|
| |
| virtual void | RemoveInputConnection (int port, int idx) |
| | Remove a connection given by index idx. More...
|
| |
| virtual void | RemoveAllInputConnections (int port) |
| | Removes all input connections. More...
|
| |
| virtual void | SetInputDataObject (int port, vtkDataObject *data) |
| | Sets the data-object as an input on the given port index. More...
|
| |
| virtual void | SetInputDataObject (vtkDataObject *data) |
| |
| virtual void | AddInputDataObject (int port, vtkDataObject *data) |
| | Add the data-object as an input to this given port. More...
|
| |
| virtual void | AddInputDataObject (vtkDataObject *data) |
| |
| vtkAlgorithmOutput * | GetOutputPort (int index) |
| | Get a proxy object corresponding to the given output port of this algorithm. More...
|
| |
| vtkAlgorithmOutput * | GetOutputPort () |
| |
| int | GetNumberOfInputConnections (int port) |
| | Get the number of inputs currently connected to a port. More...
|
| |
| int | GetTotalNumberOfInputConnections () |
| | Get the total number of inputs for this algorithm. More...
|
| |
| vtkAlgorithmOutput * | GetInputConnection (int port, int index) |
| | Get the algorithm output port connected to an input port. More...
|
| |
| vtkAlgorithm * | GetInputAlgorithm (int port, int index, int &algPort) |
| | Returns the algorithm and the output port index of that algorithm connected to a port-index pair. More...
|
| |
| vtkAlgorithm * | GetInputAlgorithm (int port, int index) |
| | Returns the algorithm connected to a port-index pair. More...
|
| |
| vtkAlgorithm * | GetInputAlgorithm () |
| | Equivalent to GetInputAlgorithm(0, 0). More...
|
| |
| vtkExecutive * | GetInputExecutive (int port, int index) |
| | Returns the executive associated with a particular input connection. More...
|
| |
| vtkExecutive * | GetInputExecutive () |
| | Equivalent to GetInputExecutive(0, 0) More...
|
| |
| vtkInformation * | GetInputInformation (int port, int index) |
| | Return the information object that is associated with a particular input connection. More...
|
| |
| vtkInformation * | GetInputInformation () |
| | Equivalent to GetInputInformation(0, 0) More...
|
| |
| vtkInformation * | GetOutputInformation (int port) |
| | Return the information object that is associated with a particular output port. More...
|
| |
| virtual int | Update (int port, vtkInformationVector *requests) |
| | This method enables the passing of data requests to the algorithm to be used during execution (in addition to bringing a particular port up-to-date). More...
|
| |
| virtual int | Update (vtkInformation *requests) |
| | Convenience method to update an algorithm after passing requests to its first output port. More...
|
| |
| virtual int | UpdatePiece (int piece, int numPieces, int ghostLevels, const int extents[6]=0) |
| | Convenience method to update an algorithm after passing requests to its first output port. More...
|
| |
| virtual int | UpdateExtent (const int extents[6]) |
| | Convenience method to update an algorithm after passing requests to its first output port. More...
|
| |
| virtual int | UpdateTimeStep (double time, int piece=-1, int numPieces=1, int ghostLevels=0, const int extents[6]=0) |
| | Convenience method to update an algorithm after passing requests to its first output port. More...
|
| |
| virtual void | UpdateInformation () |
| | Bring the algorithm's information up-to-date. More...
|
| |
| virtual void | UpdateDataObject () |
| | Create output object(s). More...
|
| |
| virtual void | PropagateUpdateExtent () |
| | Propagate meta-data upstream. More...
|
| |
| virtual void | UpdateWholeExtent () |
| | Bring this algorithm's outputs up-to-date. More...
|
| |
| void | ConvertTotalInputToPortConnection (int ind, int &port, int &conn) |
| | Convenience routine to convert from a linear ordering of input connections to a port/connection pair. More...
|
| |
| int | SetUpdateExtentToWholeExtent (int port) |
| | If the whole output extent is required, this method can be called to set the output update extent to the whole extent. More...
|
| |
| int | SetUpdateExtentToWholeExtent () |
| | Convenience function equivalent to SetUpdateExtentToWholeExtent(0) This method assumes that the whole extent is known (that UpdateInformation has been called). More...
|
| |
| void | SetUpdateExtent (int port, int piece, int numPieces, int ghostLevel) |
| | Set the output update extent in terms of piece and ghost levels. More...
|
| |
| void | SetUpdateExtent (int piece, int numPieces, int ghostLevel) |
| | Convenience function equivalent to SetUpdateExtent(0, piece, numPieces, ghostLevel) More...
|
| |
| void | SetUpdateExtent (int port, int extent[6]) |
| | Set the output update extent for data objects that use 3D extents. More...
|
| |
| void | SetUpdateExtent (int extent[6]) |
| | Convenience function equivalent to SetUpdateExtent(0, extent) More...
|
| |
| virtual vtkInformation * | GetInformation () |
| | Set/Get the information object associated with this algorithm. More...
|
| |
| virtual void | SetInformation (vtkInformation *) |
| | Set/Get the information object associated with this algorithm. More...
|
| |
| void | Register (vtkObjectBase *o) override |
| | Participate in garbage collection. More...
|
| |
| void | UnRegister (vtkObjectBase *o) override |
| | Participate in garbage collection. More...
|
| |
| virtual void | SetAbortExecute (int) |
| | Set/Get the AbortExecute flag for the process object. More...
|
| |
| virtual int | GetAbortExecute () |
| | Set/Get the AbortExecute flag for the process object. More...
|
| |
| virtual void | AbortExecuteOn () |
| | Set/Get the AbortExecute flag for the process object. More...
|
| |
| virtual void | AbortExecuteOff () |
| | Set/Get the AbortExecute flag for the process object. More...
|
| |
| virtual void | SetProgress (double) |
| | Set/Get the execution progress of a process object. More...
|
| |
| virtual double | GetProgress () |
| | Set/Get the execution progress of a process object. More...
|
| |
| void | SetProgressText (const char *ptext) |
| | Set the current text message associated with the progress state. More...
|
| |
| virtual char * | GetProgressText () |
| | Set the current text message associated with the progress state. More...
|
| |
| virtual unsigned long | GetErrorCode () |
| | The error code contains a possible error that occurred while reading or writing the file. More...
|
| |
| virtual void | SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, const char *name) |
| | Set the input data arrays that this algorithm will process. More...
|
| |
| virtual void | SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, int fieldAttributeType) |
| | Set the input data arrays that this algorithm will process. More...
|
| |
| virtual void | SetInputArrayToProcess (int idx, vtkInformation *info) |
| | Set the input data arrays that this algorithm will process. More...
|
| |
| virtual void | SetInputConnection (int port, vtkAlgorithmOutput *input) |
| | Set the connection for the given input port index. More...
|
| |
| virtual void | SetInputConnection (vtkAlgorithmOutput *input) |
| | Set the connection for the given input port index. More...
|
| |
| virtual void | AddInputConnection (int port, vtkAlgorithmOutput *input) |
| | Add a connection to the given input port index. More...
|
| |
| virtual void | AddInputConnection (vtkAlgorithmOutput *input) |
| | Add a connection to the given input port index. More...
|
| |
| virtual void | Update (int port) |
| | Bring this algorithm's outputs up-to-date. More...
|
| |
| virtual void | Update () |
| | Bring this algorithm's outputs up-to-date. More...
|
| |
| virtual void | SetReleaseDataFlag (int) |
| | Turn release data flag on or off for all output ports. More...
|
| |
| virtual int | GetReleaseDataFlag () |
| | Turn release data flag on or off for all output ports. More...
|
| |
| void | ReleaseDataFlagOn () |
| | Turn release data flag on or off for all output ports. More...
|
| |
| void | ReleaseDataFlagOff () |
| | Turn release data flag on or off for all output ports. More...
|
| |
| int | UpdateExtentIsEmpty (vtkInformation *pinfo, vtkDataObject *output) |
| | This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. More...
|
| |
| int | UpdateExtentIsEmpty (vtkInformation *pinfo, int extentType) |
| | This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. More...
|
| |
| int * | GetUpdateExtent () |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| int * | GetUpdateExtent (int port) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| void | GetUpdateExtent (int &x0, int &x1, int &y0, int &y1, int &z0, int &z1) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| void | GetUpdateExtent (int port, int &x0, int &x1, int &y0, int &y1, int &z0, int &z1) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| void | GetUpdateExtent (int extent[6]) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| void | GetUpdateExtent (int port, int extent[6]) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| int | GetUpdatePiece () |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdatePiece (int port) |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdateNumberOfPieces () |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdateNumberOfPieces (int port) |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdateGhostLevel () |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdateGhostLevel (int port) |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| void | SetProgressObserver (vtkProgressObserver *) |
| | If an ProgressObserver is set, the algorithm will report progress through it rather than directly. More...
|
| |
| virtual vtkProgressObserver * | GetProgressObserver () |
| | If an ProgressObserver is set, the algorithm will report progress through it rather than directly. More...
|
| |
| | vtkBaseTypeMacro (vtkObject, vtkObjectBase) |
| |
| virtual void | DebugOn () |
| | Turn debugging output on. More...
|
| |
| virtual void | DebugOff () |
| | Turn debugging output off. More...
|
| |
| bool | GetDebug () |
| | Get the value of the debug flag. More...
|
| |
| void | SetDebug (bool debugFlag) |
| | Set the value of the debug flag. More...
|
| |
| virtual void | Modified () |
| | Update the modification time for this object. More...
|
| |
| virtual vtkMTimeType | GetMTime () |
| | Return this object's modified time. More...
|
| |
| void | RemoveObserver (unsigned long tag) |
| |
| void | RemoveObservers (unsigned long event) |
| |
| void | RemoveObservers (const char *event) |
| |
| void | RemoveAllObservers () |
| |
| int | HasObserver (unsigned long event) |
| |
| int | HasObserver (const char *event) |
| |
| int | InvokeEvent (unsigned long event) |
| |
| int | InvokeEvent (const char *event) |
| |
| unsigned long | AddObserver (unsigned long event, vtkCommand *, float priority=0.0f) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| unsigned long | AddObserver (const char *event, vtkCommand *, float priority=0.0f) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| vtkCommand * | GetCommand (unsigned long tag) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| void | RemoveObserver (vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| void | RemoveObservers (unsigned long event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| void | RemoveObservers (const char *event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| int | HasObserver (unsigned long event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| int | HasObserver (const char *event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| template<class U , class T > |
| unsigned long | AddObserver (unsigned long event, U observer, void(T::*callback)(), float priority=0.0f) |
| | Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...
|
| |
| template<class U , class T > |
| unsigned long | AddObserver (unsigned long event, U observer, void(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f) |
| | Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...
|
| |
| template<class U , class T > |
| unsigned long | AddObserver (unsigned long event, U observer, bool(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f) |
| | Allow user to set the AbortFlagOn() with the return value of the callback method. More...
|
| |
| int | InvokeEvent (unsigned long event, void *callData) |
| | This method invokes an event and return whether the event was aborted or not. More...
|
| |
| int | InvokeEvent (const char *event, void *callData) |
| | This method invokes an event and return whether the event was aborted or not. More...
|
| |
| const char * | GetClassName () const |
| | Return the class name as a string. More...
|
| |
| virtual void | Delete () |
| | Delete a VTK object. More...
|
| |
| virtual void | FastDelete () |
| | Delete a reference to this object. More...
|
| |
| void | InitializeObjectBase () |
| |
| void | Print (ostream &os) |
| | Print an object to an ostream. More...
|
| |
| int | GetReferenceCount () |
| | Return the current reference count of this object. More...
|
| |
| void | SetReferenceCount (int) |
| | Sets the reference count. More...
|
| |
| void | PrintRevisions (ostream &) |
| | Legacy. More...
|
| |
| virtual void | PrintHeader (ostream &os, vtkIndent indent) |
| | Methods invoked by print to print information about the object including superclasses. More...
|
| |
| virtual void | PrintTrailer (ostream &os, vtkIndent indent) |
| | Methods invoked by print to print information about the object including superclasses. More...
|
| |
|
| | vtkImageConvolve () |
| |
| | ~vtkImageConvolve () |
| |
| void | ThreadedRequestData (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector, vtkImageData ***inData, vtkImageData **outData, int outExt[6], int id) |
| | If the subclass does not define an Execute method, then the task will be broken up, multiple threads will be spawned, and each thread will call this method. More...
|
| |
| void | GetKernel (double *kernel) |
| |
| double * | GetKernel () |
| |
| void | SetKernel (const double *kernel, int sizeX, int sizeY, int sizeZ) |
| |
| | vtkThreadedImageAlgorithm () |
| |
| | ~vtkThreadedImageAlgorithm () override |
| |
| int | RequestData (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) override |
| | This is called by the superclass. More...
|
| |
| virtual void | SMPRequestData (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector, vtkImageData ***inData, vtkImageData **outData, vtkIdType begin, vtkIdType end, vtkIdType pieces, int extent[6]) |
| | Execute ThreadedRequestData for the given set of pieces. More...
|
| |
| virtual void | PrepareImageData (vtkInformationVector **inputVector, vtkInformationVector *outputVector, vtkImageData ***inDataObjects=0, vtkImageData **outDataObjects=0) |
| | Allocate space for output data and copy attributes from first input. More...
|
| |
| | vtkImageAlgorithm () |
| |
| | ~vtkImageAlgorithm () override |
| |
| virtual int | RequestInformation (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) |
| | Subclasses can reimplement this method to collect information from their inputs and set information for their outputs. More...
|
| |
| virtual int | RequestUpdateExtent (vtkInformation *, vtkInformationVector **, vtkInformationVector *) |
| | Subclasses can reimplement this method to translate the update extent requests from each output port into update extent requests for the input connections. More...
|
| |
| virtual void | CopyInputArrayAttributesToOutput (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) |
| | Convenience method to copy the scalar type and number of components from the input data to the output data. More...
|
| |
| virtual void | ExecuteDataWithInformation (vtkDataObject *output, vtkInformation *outInfo) |
| | This is a convenience method that is implemented in many subclasses instead of RequestData. More...
|
| |
| virtual void | CopyAttributeData (vtkImageData *in, vtkImageData *out, vtkInformationVector **inputVector) |
| | Copy the other point and cell data. More...
|
| |
| virtual void | ExecuteData (vtkDataObject *output) |
| | This method is the old style execute method, provided for the sake of backwards compatibility with older filters and readers. More...
|
| |
| virtual void | Execute () |
| | This method is the old style execute method, provided for the sake of backwards compatibility with older filters and readers. More...
|
| |
| virtual void | AllocateOutputData (vtkImageData *out, vtkInformation *outInfo, int *uExtent) |
| | Allocate the output data. More...
|
| |
| virtual vtkImageData * | AllocateOutputData (vtkDataObject *out, vtkInformation *outInfo) |
| | Allocate the output data. More...
|
| |
| int | FillOutputPortInformation (int port, vtkInformation *info) override |
| | These method should be reimplemented by subclasses that have more than a single input or single output. More...
|
| |
| int | FillInputPortInformation (int port, vtkInformation *info) override |
| | These method should be reimplemented by subclasses that have more than a single input or single output. More...
|
| |
| | vtkAlgorithm () |
| |
| | ~vtkAlgorithm () override |
| |
| virtual void | SetNumberOfInputPorts (int n) |
| | Set the number of input ports used by the algorithm. More...
|
| |
| virtual void | SetNumberOfOutputPorts (int n) |
| | Set the number of output ports provided by the algorithm. More...
|
| |
| int | InputPortIndexInRange (int index, const char *action) |
| |
| int | OutputPortIndexInRange (int index, const char *action) |
| |
| int | GetInputArrayAssociation (int idx, vtkInformationVector **inputVector) |
| | Get the assocition of the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
|
| |
| vtkInformation * | GetInputArrayFieldInformation (int idx, vtkInformationVector **inputVector) |
| | This method takes in an index (as specified in SetInputArrayToProcess) and a pipeline information vector. More...
|
| |
| virtual vtkExecutive * | CreateDefaultExecutive () |
| | Create a default executive. More...
|
| |
| void | ReportReferences (vtkGarbageCollector *) override |
| |
| virtual void | SetNthInputConnection (int port, int index, vtkAlgorithmOutput *input) |
| | Replace the Nth connection on the given input port. More...
|
| |
| virtual void | SetNumberOfInputConnections (int port, int n) |
| | Set the number of input connections on the given input port. More...
|
| |
| void | SetInputDataInternal (int port, vtkDataObject *input) |
| | These methods are used by subclasses to implement methods to set data objects directly as input. More...
|
| |
| void | AddInputDataInternal (int port, vtkDataObject *input) |
| |
| int | GetInputArrayAssociation (int idx, int connection, vtkInformationVector **inputVector) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| int | GetInputArrayAssociation (int idx, vtkDataObject *input) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, vtkInformationVector **inputVector) |
| | Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, vtkInformationVector **inputVector, int &association) |
| | Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, vtkDataObject *input) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, vtkDataObject *input, int &association) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector) |
| | Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector, int &association) |
| | Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkDataObject *input) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkDataObject *input, int &association) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| virtual void | SetErrorCode (unsigned long) |
| | The error code contains a possible error that occurred while reading or writing the file. More...
|
| |
| | vtkObject () |
| |
| | ~vtkObject () override |
| |
| void | RegisterInternal (vtkObjectBase *, vtkTypeBool check) override |
| |
| void | UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) override |
| |
| void | InternalGrabFocus (vtkCommand *mouseEvents, vtkCommand *keypressEvents=NULL) |
| | These methods allow a command to exclusively grab all events. More...
|
| |
| void | InternalReleaseFocus () |
| | These methods allow a command to exclusively grab all events. More...
|
| |
| | vtkObjectBase () |
| |
| virtual | ~vtkObjectBase () |
| |
| virtual void | CollectRevisions (ostream &) |
| |
| | vtkObjectBase (const vtkObjectBase &) |
| |
| void | operator= (const vtkObjectBase &) |
| |
Public Member Functions inherited from vtkThreadedImageAlgorithm