VTK
Public Types | Public Member Functions | Static Public Member Functions | Protected Member Functions | Protected Attributes | List of all members
vtkTupleInterpolator Class Reference

interpolate a tuple of arbitray size More...

#include <vtkTupleInterpolator.h>

Inheritance diagram for vtkTupleInterpolator:
[legend]
Collaboration diagram for vtkTupleInterpolator:
[legend]

Public Types

enum  { INTERPOLATION_TYPE_LINEAR =0, INTERPOLATION_TYPE_SPLINE }
 Enums to control the type of interpolation to use. More...
 
typedef vtkObject Superclass
 

Public Member Functions

virtual int IsA (const char *type)
 Return 1 if this class is the same type of (or a subclass of) the named class. More...
 
vtkTupleInterpolatorNewInstance () const
 
void PrintSelf (ostream &os, vtkIndent indent)
 Methods invoked by print to print information about the object including superclasses. More...
 
int GetNumberOfTuples ()
 Return the number of tuples in the list of tuples to be interpolated. More...
 
void Initialize ()
 Reset the class so that it contains no (t,tuple) information. More...
 
void AddTuple (double t, double tuple[])
 Add another tuple to the list of tuples to be interpolated. More...
 
void RemoveTuple (double t)
 Delete the tuple at a particular parameter t. More...
 
void InterpolateTuple (double t, double tuple[])
 Interpolate the list of tuples and determine a new tuple (i.e., fill in the tuple provided). More...
 
void SetNumberOfComponents (int numComp)
 Specify the number of tuple components to interpolate. More...
 
virtual int GetNumberOfComponents ()
 Specify the number of tuple components to interpolate. More...
 
double GetMinimumT ()
 Obtain some information about the interpolation range. More...
 
double GetMaximumT ()
 Obtain some information about the interpolation range. More...
 
void SetInterpolationType (int type)
 Specify which type of function to use for interpolation. More...
 
virtual int GetInterpolationType ()
 Specify which type of function to use for interpolation. More...
 
void SetInterpolationTypeToLinear ()
 Specify which type of function to use for interpolation. More...
 
void SetInterpolationTypeToSpline ()
 Specify which type of function to use for interpolation. More...
 
void SetInterpolatingSpline (vtkSpline *)
 If the InterpolationType is set to spline, then this method applies. More...
 
virtual vtkSplineGetInterpolatingSpline ()
 If the InterpolationType is set to spline, then this method applies. More...
 
- Public Member Functions inherited from vtkObject
 vtkBaseTypeMacro (vtkObject, vtkObjectBase)
 
virtual void DebugOn ()
 Turn debugging output on. More...
 
virtual void DebugOff ()
 Turn debugging output off. More...
 
bool GetDebug ()
 Get the value of the debug flag. More...
 
void SetDebug (bool debugFlag)
 Set the value of the debug flag. More...
 
virtual void Modified ()
 Update the modification time for this object. More...
 
virtual vtkMTimeType GetMTime ()
 Return this object's modified time. More...
 
void RemoveObserver (unsigned long tag)
 
void RemoveObservers (unsigned long event)
 
void RemoveObservers (const char *event)
 
void RemoveAllObservers ()
 
int HasObserver (unsigned long event)
 
int HasObserver (const char *event)
 
int InvokeEvent (unsigned long event)
 
int InvokeEvent (const char *event)
 
unsigned long AddObserver (unsigned long event, vtkCommand *, float priority=0.0f)
 Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
 
unsigned long AddObserver (const char *event, vtkCommand *, float priority=0.0f)
 Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
 
vtkCommandGetCommand (unsigned long tag)
 Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
 
void RemoveObserver (vtkCommand *)
 Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
 
void RemoveObservers (unsigned long event, vtkCommand *)
 Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
 
void RemoveObservers (const char *event, vtkCommand *)
 Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
 
int HasObserver (unsigned long event, vtkCommand *)
 Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
 
int HasObserver (const char *event, vtkCommand *)
 Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
 
template<class U , class T >
unsigned long AddObserver (unsigned long event, U observer, void(T::*callback)(), float priority=0.0f)
 Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...
 
template<class U , class T >
unsigned long AddObserver (unsigned long event, U observer, void(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f)
 Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...
 
template<class U , class T >
unsigned long AddObserver (unsigned long event, U observer, bool(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f)
 Allow user to set the AbortFlagOn() with the return value of the callback method. More...
 
int InvokeEvent (unsigned long event, void *callData)
 This method invokes an event and return whether the event was aborted or not. More...
 
int InvokeEvent (const char *event, void *callData)
 This method invokes an event and return whether the event was aborted or not. More...
 
- Public Member Functions inherited from vtkObjectBase
const char * GetClassName () const
 Return the class name as a string. More...
 
virtual void Delete ()
 Delete a VTK object. More...
 
virtual void FastDelete ()
 Delete a reference to this object. More...
 
void InitializeObjectBase ()
 
void Print (ostream &os)
 Print an object to an ostream. More...
 
virtual void Register (vtkObjectBase *o)
 Increase the reference count (mark as used by another object). More...
 
virtual void UnRegister (vtkObjectBase *o)
 Decrease the reference count (release by another object). More...
 
int GetReferenceCount ()
 Return the current reference count of this object. More...
 
void SetReferenceCount (int)
 Sets the reference count. More...
 
void PrintRevisions (ostream &)
 Legacy. More...
 
virtual void PrintHeader (ostream &os, vtkIndent indent)
 Methods invoked by print to print information about the object including superclasses. More...
 
virtual void PrintTrailer (ostream &os, vtkIndent indent)
 Methods invoked by print to print information about the object including superclasses. More...
 

Static Public Member Functions

static int IsTypeOf (const char *type)
 
static vtkTupleInterpolatorSafeDownCast (vtkObjectBase *o)
 
static vtkTupleInterpolatorNew ()
 Instantiate the class. More...
 
- Static Public Member Functions inherited from vtkObject
static vtkObjectNew ()
 Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More...
 
static void BreakOnError ()
 This method is called when vtkErrorMacro executes. More...
 
static void SetGlobalWarningDisplay (int val)
 This is a global flag that controls whether any debug, warning or error messages are displayed. More...
 
static void GlobalWarningDisplayOn ()
 This is a global flag that controls whether any debug, warning or error messages are displayed. More...
 
static void GlobalWarningDisplayOff ()
 This is a global flag that controls whether any debug, warning or error messages are displayed. More...
 
static int GetGlobalWarningDisplay ()
 This is a global flag that controls whether any debug, warning or error messages are displayed. More...
 
- Static Public Member Functions inherited from vtkObjectBase
static vtkTypeBool IsTypeOf (const char *name)
 Return 1 if this class type is the same type of (or a subclass of) the named class. More...
 
static vtkObjectBaseNew ()
 Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More...
 

Protected Member Functions

virtual vtkObjectBaseNewInstanceInternal () const
 
 vtkTupleInterpolator ()
 
virtual ~vtkTupleInterpolator ()
 
void InitializeInterpolation ()
 
- Protected Member Functions inherited from vtkObject
 vtkObject ()
 
 ~vtkObject () override
 
void RegisterInternal (vtkObjectBase *, vtkTypeBool check) override
 
void UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) override
 
void InternalGrabFocus (vtkCommand *mouseEvents, vtkCommand *keypressEvents=NULL)
 These methods allow a command to exclusively grab all events. More...
 
void InternalReleaseFocus ()
 These methods allow a command to exclusively grab all events. More...
 
- Protected Member Functions inherited from vtkObjectBase
 vtkObjectBase ()
 
virtual ~vtkObjectBase ()
 
virtual void CollectRevisions (ostream &)
 
virtual void ReportReferences (vtkGarbageCollector *)
 
 vtkObjectBase (const vtkObjectBase &)
 
void operator= (const vtkObjectBase &)
 

Protected Attributes

int NumberOfComponents
 
int InterpolationType
 
vtkSplineInterpolatingSpline
 
vtkPiecewiseFunction ** Linear
 
vtkSpline ** Spline
 
- Protected Attributes inherited from vtkObject
bool Debug
 
vtkTimeStamp MTime
 
vtkSubjectHelper * SubjectHelper
 
- Protected Attributes inherited from vtkObjectBase
vtkAtomicInt32 ReferenceCount
 
vtkWeakPointerBase ** WeakPointers
 

Detailed Description

interpolate a tuple of arbitray size

This class is used to interpolate a tuple which may have an arbitrary number of components (but at least one component). The interpolation may be linear in form, or via a subclasses of vtkSpline.

To use this class, begin by specifying the number of components of the tuple and the interpolation function to use. Then specify at least one pair of (t,tuple) with the AddTuple() method. Next interpolate the tuples with the InterpolateTuple(t,tuple) method, where "t" must be in the range of (t_min,t_max) parameter values specified by the AddTuple() method (if not then t is clamped), and tuple[] is filled in by the method (make sure that tuple [] is long enough to hold the interpolated data).

You can control the type of interpolation to use. By default, the interpolation is based on a Kochanek spline. However, other types of splines can be specified. You can also set the interpolation method to linear, in which case the specified spline has no effect on the interpolation.

Warning
Setting the number of components or changing the type of interpolation causes the list of tuples to be reset, so any data inserted up to that point is lost. Bisection methods are used to speed up the search for the interpolation interval.

Definition at line 54 of file vtkTupleInterpolator.h.

Member Typedef Documentation

Definition at line 57 of file vtkTupleInterpolator.h.

Member Enumeration Documentation

anonymous enum

Enums to control the type of interpolation to use.

Enumerator
INTERPOLATION_TYPE_LINEAR 
INTERPOLATION_TYPE_SPLINE 

Definition at line 121 of file vtkTupleInterpolator.h.

Constructor & Destructor Documentation

vtkTupleInterpolator::vtkTupleInterpolator ( )
protected
virtual vtkTupleInterpolator::~vtkTupleInterpolator ( )
protectedvirtual

Member Function Documentation

static int vtkTupleInterpolator::IsTypeOf ( const char *  type)
static
virtual int vtkTupleInterpolator::IsA ( const char *  name)
virtual

Return 1 if this class is the same type of (or a subclass of) the named class.

Returns 0 otherwise. This method works in combination with vtkTypeMacro found in vtkSetGet.h.

Reimplemented from vtkObjectBase.

static vtkTupleInterpolator* vtkTupleInterpolator::SafeDownCast ( vtkObjectBase o)
static
virtual vtkObjectBase* vtkTupleInterpolator::NewInstanceInternal ( ) const
protectedvirtual
vtkTupleInterpolator* vtkTupleInterpolator::NewInstance ( ) const
void vtkTupleInterpolator::PrintSelf ( ostream &  os,
vtkIndent  indent 
)
virtual

Methods invoked by print to print information about the object including superclasses.

Typically not called by the user (use Print() instead) but used in the hierarchical print process to combine the output of several classes.

Reimplemented from vtkObject.

static vtkTupleInterpolator* vtkTupleInterpolator::New ( )
static

Instantiate the class.

void vtkTupleInterpolator::SetNumberOfComponents ( int  numComp)

Specify the number of tuple components to interpolate.

Note that setting this value discards any previously inserted data.

virtual int vtkTupleInterpolator::GetNumberOfComponents ( )
virtual

Specify the number of tuple components to interpolate.

Note that setting this value discards any previously inserted data.

int vtkTupleInterpolator::GetNumberOfTuples ( )

Return the number of tuples in the list of tuples to be interpolated.

double vtkTupleInterpolator::GetMinimumT ( )

Obtain some information about the interpolation range.

The numbers returned (corresponding to parameter t, usually thought of as time) are undefined if the list of transforms is empty. This is a convenience method for interpolation.

double vtkTupleInterpolator::GetMaximumT ( )

Obtain some information about the interpolation range.

The numbers returned (corresponding to parameter t, usually thought of as time) are undefined if the list of transforms is empty. This is a convenience method for interpolation.

void vtkTupleInterpolator::Initialize ( )

Reset the class so that it contains no (t,tuple) information.

void vtkTupleInterpolator::AddTuple ( double  t,
double  tuple[] 
)

Add another tuple to the list of tuples to be interpolated.

Note that using the same time t value more than once replaces the previous tuple value at t. At least two tuples must be added to define an interpolation function.

void vtkTupleInterpolator::RemoveTuple ( double  t)

Delete the tuple at a particular parameter t.

If there is no tuple defined at t, then the method does nothing.

void vtkTupleInterpolator::InterpolateTuple ( double  t,
double  tuple[] 
)

Interpolate the list of tuples and determine a new tuple (i.e., fill in the tuple provided).

If t is outside the range of (min,max) values, then t is clamped. Note that each component of tuple[] is interpolated independently.

void vtkTupleInterpolator::SetInterpolationType ( int  type)

Specify which type of function to use for interpolation.

By default spline interpolation (SetInterpolationFunctionToSpline()) is used (i.e., a Kochanek spline) and the InterpolatingSpline instance variable is used to birth the actual interpolation splines via a combination of NewInstance() and DeepCopy(). You may also choose to use linear interpolation by invoking SetInterpolationFunctionToLinear(). Note that changing the type of interpolation causes previously inserted data to be discarded.

virtual int vtkTupleInterpolator::GetInterpolationType ( )
virtual

Specify which type of function to use for interpolation.

By default spline interpolation (SetInterpolationFunctionToSpline()) is used (i.e., a Kochanek spline) and the InterpolatingSpline instance variable is used to birth the actual interpolation splines via a combination of NewInstance() and DeepCopy(). You may also choose to use linear interpolation by invoking SetInterpolationFunctionToLinear(). Note that changing the type of interpolation causes previously inserted data to be discarded.

void vtkTupleInterpolator::SetInterpolationTypeToLinear ( )
inline

Specify which type of function to use for interpolation.

By default spline interpolation (SetInterpolationFunctionToSpline()) is used (i.e., a Kochanek spline) and the InterpolatingSpline instance variable is used to birth the actual interpolation splines via a combination of NewInstance() and DeepCopy(). You may also choose to use linear interpolation by invoking SetInterpolationFunctionToLinear(). Note that changing the type of interpolation causes previously inserted data to be discarded.

Definition at line 138 of file vtkTupleInterpolator.h.

void vtkTupleInterpolator::SetInterpolationTypeToSpline ( )
inline

Specify which type of function to use for interpolation.

By default spline interpolation (SetInterpolationFunctionToSpline()) is used (i.e., a Kochanek spline) and the InterpolatingSpline instance variable is used to birth the actual interpolation splines via a combination of NewInstance() and DeepCopy(). You may also choose to use linear interpolation by invoking SetInterpolationFunctionToLinear(). Note that changing the type of interpolation causes previously inserted data to be discarded.

Definition at line 140 of file vtkTupleInterpolator.h.

void vtkTupleInterpolator::SetInterpolatingSpline ( vtkSpline )

If the InterpolationType is set to spline, then this method applies.

By default Kochanek interpolation is used, but you can specify any instance of vtkSpline to use. Note that the actual interpolating splines are created by invoking NewInstance() followed by DeepCopy() on the interpolating spline specified here, for each tuple component to interpolate.

virtual vtkSpline* vtkTupleInterpolator::GetInterpolatingSpline ( )
virtual

If the InterpolationType is set to spline, then this method applies.

By default Kochanek interpolation is used, but you can specify any instance of vtkSpline to use. Note that the actual interpolating splines are created by invoking NewInstance() followed by DeepCopy() on the interpolating spline specified here, for each tuple component to interpolate.

void vtkTupleInterpolator::InitializeInterpolation ( )
protected

Member Data Documentation

int vtkTupleInterpolator::NumberOfComponents
protected

Definition at line 162 of file vtkTupleInterpolator.h.

int vtkTupleInterpolator::InterpolationType
protected

Definition at line 165 of file vtkTupleInterpolator.h.

vtkSpline* vtkTupleInterpolator::InterpolatingSpline
protected

Definition at line 168 of file vtkTupleInterpolator.h.

vtkPiecewiseFunction** vtkTupleInterpolator::Linear
protected

Definition at line 172 of file vtkTupleInterpolator.h.

vtkSpline** vtkTupleInterpolator::Spline
protected

Definition at line 173 of file vtkTupleInterpolator.h.


The documentation for this class was generated from the following file: