#include <vtkHull.h>
Inheritance diagram for vtkHull:
vtkHull is a filter which will produce an n-sided convex hull given a set of n planes. (The convex hull bounds the input polygonal data.) The hull is generated by squeezing the planes towards the input vtkPolyData, until the planes just touch the vtkPolyData. Then, the resulting planes are used to generate a polyhedron (i.e., hull) that is represented by triangles.
The n planes can be defined in a number of ways including 1) manually specifying each plane; 2) choosing the six face planes of the input's bounding box; 3) choosing the eight vertex planes of the input's bounding box; 4) choosing the twelve edge planes of the input's bounding box; and/or 5) using a recursively subdivided octahedron. Note that when specifying planes, the plane normals should point outside of the convex region.
The output of this filter can be used in combination with vtkLODActor to represent a levels-of-detail in the LOD hierarchy. Another use of this class is to manually specify the planes, and then generate the polyhedron from the planes (without squeezing the planes towards the input). The method GenerateHull() is used to do this.
Definition at line 53 of file vtkHull.h.
Public Types | |
| typedef vtkPolyDataAlgorithm | Superclass |
Public Member Functions | |
| virtual const char * | GetClassName () |
| virtual int | IsA (const char *type) |
| void | PrintSelf (ostream &os, vtkIndent indent) |
| void | AddCubeVertexPlanes () |
| void | AddCubeEdgePlanes () |
| void | AddCubeFacePlanes () |
| void | RemoveAllPlanes (void) |
| int | AddPlane (double A, double B, double C) |
| int | AddPlane (double plane[3]) |
| void | SetPlane (int i, double A, double B, double C) |
| void | SetPlane (int i, double plane[3]) |
| int | AddPlane (double A, double B, double C, double D) |
| int | AddPlane (double plane[3], double D) |
| void | SetPlane (int i, double A, double B, double C, double D) |
| void | SetPlane (int i, double plane[3], double D) |
| void | SetPlanes (vtkPlanes *planes) |
| virtual int | GetNumberOfPlanes () |
| void | AddRecursiveSpherePlanes (int level) |
| void | GenerateHull (vtkPolyData *pd, double *bounds) |
| void | GenerateHull (vtkPolyData *pd, double xmin, double xmax, double ymin, double ymax, double zmin, double zmax) |
Static Public Member Functions | |
| static vtkHull * | New () |
| static int | IsTypeOf (const char *type) |
| static vtkHull * | SafeDownCast (vtkObject *o) |
Protected Member Functions | |
| vtkHull () | |
| ~vtkHull () | |
| void | ComputePlaneDistances (vtkPolyData *input) |
| void | ClipPolygonsFromPlanes (vtkPoints *points, vtkCellArray *polys, double *bounds) |
| void | CreateInitialPolygon (double *, int, double *) |
| int | RequestData (vtkInformation *, vtkInformationVector **, vtkInformationVector *) |
Protected Attributes | |
| double * | Planes |
| int | PlanesStorageSize |
| int | NumberOfPlanes |
|
|
Reimplemented from vtkPolyDataAlgorithm. |
|
|
|
|
|
|
|
|
Create an object with Debug turned off, modified time initialized to zero, and reference counting on. Reimplemented from vtkPolyDataAlgorithm. |
|
|
Reimplemented from vtkPolyDataAlgorithm. |
|
|
Return 1 if this class type is the same type of (or a subclass of) the named class. Returns 0 otherwise. This method works in combination with vtkTypeRevisionMacro found in vtkSetGet.h. Reimplemented from vtkPolyDataAlgorithm. |
|
|
Return 1 if this class is the same type of (or a subclass of) the named class. Returns 0 otherwise. This method works in combination with vtkTypeRevisionMacro found in vtkSetGet.h. Reimplemented from vtkPolyDataAlgorithm. |
|
|
Reimplemented from vtkPolyDataAlgorithm. |
|
||||||||||||
|
Methods invoked by print to print information about the object including superclasses. Typically not called by the user (use Print() instead) but used in the hierarchical print process to combine the output of several classes. Reimplemented from vtkPolyDataAlgorithm. |
|
|
Remove all planes from the current set of planes. |
|
||||||||||||||||
|
Add a plane to the current set of planes. It will be added at the end of the list, and an index that can later be used to set this plane's normal will be returned. The values A, B, C are from the plane equation Ax + By + Cz + D = 0. This vector does not have to have unit length (but it must have a non-zero length!). If a value 0 > i >= -NumberOfPlanes is returned, then the plane is parallel with a previously inserted plane, and |-i-1| is the index of the plane that was previously inserted. If a value i < -NumberOfPlanes is returned, then the plane normal is zero length. |
|
|
Remove all planes from the current set of planes. |
|
||||||||||||||||||||
|
Set the normal values for plane i. This is a plane that was already added to the current set of planes with AddPlane(), and is now being modified. The values A, B, C are from the plane equation Ax + By + Cz + D = 0. This vector does not have to have unit length. Note that D is set to zero, except in the case of the method taking a vtkPlanes* argument, where it is set to the D value defined there. |
|
||||||||||||
|
Set the normal values for plane i. This is a plane that was already added to the current set of planes with AddPlane(), and is now being modified. The values A, B, C are from the plane equation Ax + By + Cz + D = 0. This vector does not have to have unit length. Note that D is set to zero, except in the case of the method taking a vtkPlanes* argument, where it is set to the D value defined there. |
|
||||||||||||||||||||
|
Variations of AddPlane()/SetPlane() that allow D to be set. These methods are used when GenerateHull() is used. |
|
||||||||||||
|
Variations of AddPlane()/SetPlane() that allow D to be set. These methods are used when GenerateHull() is used. |
|
||||||||||||||||||||||||
|
Variations of AddPlane()/SetPlane() that allow D to be set. These methods are used when GenerateHull() is used. |
|
||||||||||||||||
|
Variations of AddPlane()/SetPlane() that allow D to be set. These methods are used when GenerateHull() is used. |
|
|
Set all the planes at once using a vtkPlanes implicit function. This also sets the D value, so it can be used with GenerateHull(). |
|
|
Get the number of planes in the current set of planes. |
|
|
Add the 8 planes that represent the vertices of a cube - the combination of the three face planes connecting to a vertex - (1,1,1), (1,1,-1), (1,-1,1), (1,-1,1), (-1,1,1), (-1,1,-1), (-1,-1,1), (-1,-1-1). |
|
|
Add the 12 planes that represent the edges of a cube - halfway between the two connecting face planes - (1,1,0), (-1,-1,0), (-1,1,0), (1,-1,0), (0,1,1), (0,-1,-1), (0,1,-1), (0,-1,1), (1,0,1), (-1,0,-1), (1,0,-1), (-1,0,1) |
|
|
Add the six planes that make up the faces of a cube - (1,0,0), (-1, 0, 0), (0,1,0), (0,-1,0), (0,0,1), (0,0,-1) |
|
|
Add the planes that represent the normals of the vertices of a polygonal sphere formed by recursively subdividing the triangles in an octahedron. Each triangle is subdivided by connecting the midpoints of the edges thus forming 4 smaller triangles. The level indicates how many subdivisions to do with a level of 0 used to add the 6 planes from the original octahedron, level 1 will add 18 planes, and so on. |
|
||||||||||||
|
A special method that is used to generate a polyhedron directly from a set of n planes. The planes that are supplied by the user are not squeezed towards the input data (in fact the user need not specify an input). To use this method, you must provide an instance of vtkPolyData into which the points and cells defining the polyhedron are placed. You must also provide a bounding box where you expect the resulting polyhedron to lie. This can be a very generous fit, it's only used to create the initial polygons that are eventually clipped. |
|
||||||||||||||||||||||||||||||||
|
Add the planes that represent the normals of the vertices of a polygonal sphere formed by recursively subdividing the triangles in an octahedron. Each triangle is subdivided by connecting the midpoints of the edges thus forming 4 smaller triangles. The level indicates how many subdivisions to do with a level of 0 used to add the 6 planes from the original octahedron, level 1 will add 18 planes, and so on. |
|
|
|
|
||||||||||||||||
|
|
|
||||||||||||||||
|
|
|
||||||||||||||||
|
This is called by the superclass. This is the method you should override. Reimplemented from vtkPolyDataAlgorithm. |
|
|
|
|
|
|
|
|
|
1.4.3-20050530