vtkMultiBlockPLOT3DReader Class Reference

#include <vtkMultiBlockPLOT3DReader.h>

Inheritance diagram for vtkMultiBlockPLOT3DReader:

[legend]Collaboration diagram for vtkMultiBlockPLOT3DReader:

[legend]List of all members.

Detailed Description

read PLOT3D data files

vtkMultiBlockPLOT3DReader is a reader object that reads PLOT3D formatted files and generates structured grid(s) on output. PLOT3D is a computer graphics program designed to visualize the grids and solutions of computational fluid dynamics. Please see the "PLOT3D User's Manual" available from NASA Ames Research Center, Moffett Field CA.

PLOT3D files consist of a grid file (also known as XYZ file), an optional solution file (also known as a Q file), and an optional function file that contains user created data (currently unsupported). The Q file contains solution information as follows: the four parameters free stream mach number (Fsmach), angle of attack (Alpha), Reynolds number (Re), and total integration time (Time). This information is stored in an array called Properties in the FieldData of each output (tuple 0: fsmach, tuple 1: alpha, tuple 2: re, tuple 3: time). In addition, the solution file contains the flow density (scalar), flow momentum (vector), and flow energy (scalar).

The reader can generate additional scalars and vectors (or "functions") from this information. To use vtkMultiBlockPLOT3DReader, you must specify the particular function number for the scalar and vector you want to visualize. This implementation of the reader provides the following functions. The scalar functions are: -1 - don't read or compute any scalars 100 - density 110 - pressure 120 - temperature 130 - enthalpy 140 - internal energy 144 - kinetic energy 153 - velocity magnitude 163 - stagnation energy 170 - entropy 184 - swirl.

The vector functions are: -1 - don't read or compute any vectors 200 - velocity 201 - vorticity 202 - momentum 210 - pressure gradient.

(Other functions are described in the PLOT3D spec, but only those listed are implemented here.) Note that by default, this reader creates the density scalar (100) and momentum vector (202) as output. (These are just read in from the solution file.) Please note that the validity of computation is a function of this class's gas constants (R, Gamma) and the equations used. They may not be suitable for your computational domain.

Additionally, you can read other data and associate it as a vtkDataArray into the output's point attribute data. Use the method AddFunction() to list all the functions that you'd like to read. AddFunction() accepts an integer parameter that defines the function number.

See also:: vtkStructuredGridSource vtkStructuredGrid

Tests:: vtkMultiBlockPLOT3DReader (Tests)

Definition at line 89 of file vtkMultiBlockPLOT3DReader.h.

Public Types

typedef vtkHierarchicalDataSetAlgorithm Superclass

enum { FILE_BIG_ENDIAN = 0, FILE_LITTLE_ENDIAN = 1 }

Public Member Functions

virtual const char * GetClassName ()

virtual int IsA (const char *type)

virtual int CanReadBinaryFile (const char *fname)

int GenerateDefaultConfiguration ()

void PrintSelf (ostream &os, vtkIndent indent)

void SetFileName (const char *name)

const char * GetFileName ()

virtual void SetXYZFileName (const char *)

virtual char * GetXYZFileName ()

virtual void SetQFileName (const char *)

virtual char * GetQFileName ()

int GetNumberOfBlocks ()

int GetNumberOfGrids ()

virtual void SetBinaryFile (int)

virtual int GetBinaryFile ()

virtual void BinaryFileOn ()

virtual void BinaryFileOff ()

virtual void SetMultiGrid (int)

virtual int GetMultiGrid ()

virtual void MultiGridOn ()

virtual void MultiGridOff ()

virtual void SetHasByteCount (int)

virtual int GetHasByteCount ()

virtual void HasByteCountOn ()

virtual void HasByteCountOff ()

virtual void SetIBlanking (int)

virtual int GetIBlanking ()

virtual void IBlankingOn ()

virtual void IBlankingOff ()

virtual void SetTwoDimensionalGeometry (int)

virtual int GetTwoDimensionalGeometry ()

virtual void TwoDimensionalGeometryOn ()

virtual void TwoDimensionalGeometryOff ()

virtual void SetForceRead (int)

virtual int GetForceRead ()

virtual void ForceReadOn ()

virtual void ForceReadOff ()

void SetByteOrderToBigEndian ()

void SetByteOrderToLittleEndian ()

virtual void SetByteOrder (int)

virtual int GetByteOrder ()

const char * GetByteOrderAsString ()

virtual void SetR (double)

virtual double GetR ()

virtual void SetGamma (double)

virtual double GetGamma ()

virtual void SetUvinf (double)

virtual double GetUvinf ()

virtual void SetVvinf (double)

virtual double GetVvinf ()

virtual void SetWvinf (double)

virtual double GetWvinf ()

void SetScalarFunctionNumber (int num)

virtual int GetScalarFunctionNumber ()

void SetVectorFunctionNumber (int num)

virtual int GetVectorFunctionNumber ()

void AddFunction (int functionNumber)

void RemoveFunction (int)

void RemoveAllFunctions ()

Static Public Member Functions

static vtkMultiBlockPLOT3DReader * New ()

static int IsTypeOf (const char *type)

static vtkMultiBlockPLOT3DReader * SafeDownCast (vtkObject *o)

Protected Member Functions

vtkMultiBlockPLOT3DReader ()

~vtkMultiBlockPLOT3DReader ()

int CheckFile (FILE *&fp, const char *fname)

int CheckGeometryFile (FILE *&xyzFp)

int CheckSolutionFile (FILE *&qFp)

void SkipByteCount (FILE *fp)

int ReadIntBlock (FILE *fp, int n, int *block)

int ReadFloatBlock (FILE *fp, int n, float *block)

int GetNumberOfBlocksInternal (FILE *xyzFp, int verify=1)

int ReadGeometryHeader (FILE *fp)

int ReadQHeader (FILE *fp)

void CalculateFileSize (FILE *fp)

long EstimateSize (int ni, int nj, int nk)

void AssignAttribute (int fNumber, vtkStructuredGrid *output, int attributeType)

void MapFunction (int fNumber, vtkStructuredGrid *output)

void ComputeTemperature (vtkStructuredGrid *output)

void ComputePressure (vtkStructuredGrid *output)

void ComputeEnthalpy (vtkStructuredGrid *output)

void ComputeKineticEnergy (vtkStructuredGrid *output)

void ComputeVelocityMagnitude (vtkStructuredGrid *output)

void ComputeEntropy (vtkStructuredGrid *output)

void ComputeSwirl (vtkStructuredGrid *output)

void ComputeVelocity (vtkStructuredGrid *output)

void ComputeVorticity (vtkStructuredGrid *output)

void ComputePressureGradient (vtkStructuredGrid *output)

void ClearGeometryCache ()

int VerifySettings (char *buf, int bufSize)

void ReadIntBlockV (char **buf, int n, int *block)

void SkipByteCountV (char **buf)

virtual int FillOutputPortInformation (int port, vtkInformation *info)

virtual int RequestData (vtkInformation *, vtkInformationVector **, vtkInformationVector *)

virtual int RequestInformation (vtkInformation *, vtkInformationVector **, vtkInformationVector *)

Protected Attributes

char * XYZFileName

char * QFileName

int BinaryFile

int HasByteCount

int TwoDimensionalGeometry

int MultiGrid

int ForceRead

int ByteOrder

int IBlanking

long FileSize

double R

double Gamma

double Uvinf

double Vvinf

double Wvinf

vtkIntArray * FunctionList

int ScalarFunctionNumber

int VectorFunctionNumber

vtkFloatArray ** PointCache

vtkUnsignedCharArray ** IBlankCache

Member Typedef Documentation

typedef vtkHierarchicalDataSetAlgorithm vtkMultiBlockPLOT3DReader::Superclass

Reimplemented from vtkHierarchicalDataSetAlgorithm.
Definition at line 93 of file vtkMultiBlockPLOT3DReader.h.

Member Enumeration Documentation

anonymous enum

Enumerator:

FILE_BIG_ENDIAN

FILE_LITTLE_ENDIAN

Definition at line 244 of file vtkMultiBlockPLOT3DReader.h.

Constructor & Destructor Documentation

vtkMultiBlockPLOT3DReader::vtkMultiBlockPLOT3DReader ( ) [protected]

vtkMultiBlockPLOT3DReader::~vtkMultiBlockPLOT3DReader ( ) [protected]

Member Function Documentation

static vtkMultiBlockPLOT3DReader* vtkMultiBlockPLOT3DReader::New ( ) [static]

Create an object with Debug turned off, modified time initialized to zero, and reference counting on.
Reimplemented from vtkHierarchicalDataSetAlgorithm.

virtual const char* vtkMultiBlockPLOT3DReader::GetClassName ( ) [virtual]

Reimplemented from vtkHierarchicalDataSetAlgorithm.

static int vtkMultiBlockPLOT3DReader::IsTypeOf ( const char * type ) [static]

Return 1 if this class type is the same type of (or a subclass of) the named class. Returns 0 otherwise. This method works in combination with vtkTypeRevisionMacro found in vtkSetGet.h.
Reimplemented from vtkHierarchicalDataSetAlgorithm.

virtual int vtkMultiBlockPLOT3DReader::IsA ( const char * type ) [virtual]

Return 1 if this class is the same type of (or a subclass of) the named class. Returns 0 otherwise. This method works in combination with vtkTypeRevisionMacro found in vtkSetGet.h.
Reimplemented from vtkHierarchicalDataSetAlgorithm.

static vtkMultiBlockPLOT3DReader* vtkMultiBlockPLOT3DReader::SafeDownCast ( vtkObject * o ) [static]

Reimplemented from vtkHierarchicalDataSetAlgorithm.

void vtkMultiBlockPLOT3DReader::PrintSelf ( ostream & os,

vtkIndent indent

) [virtual]

Methods invoked by print to print information about the object including superclasses. Typically not called by the user (use Print() instead) but used in the hierarchical print process to combine the output of several classes.
Reimplemented from vtkHierarchicalDataSetAlgorithm.

void vtkMultiBlockPLOT3DReader::SetFileName ( const char * name ) [inline]

Set/Get the PLOT3D geometry filename.
Definition at line 98 of file vtkMultiBlockPLOT3DReader.h.

const char* vtkMultiBlockPLOT3DReader::GetFileName ( ) [inline]

Definition at line 99 of file vtkMultiBlockPLOT3DReader.h.

virtual void vtkMultiBlockPLOT3DReader::SetXYZFileName ( const char * ) [virtual]

virtual char* vtkMultiBlockPLOT3DReader::GetXYZFileName ( ) [virtual]

virtual void vtkMultiBlockPLOT3DReader::SetQFileName ( const char * ) [virtual]

Set/Get the PLOT3D solution filename.

virtual char* vtkMultiBlockPLOT3DReader::GetQFileName ( ) [virtual]

Set/Get the PLOT3D solution filename.

int vtkMultiBlockPLOT3DReader::GetNumberOfBlocks ( )

This returns the number of outputs this reader will produce. This number is equal to the number of grids in the current file. This method has to be called before getting any output if the number of outputs will be greater than 1 (the first output is always the same). Note that every time this method is invoked, the header file is opened and part of the header is read.

int vtkMultiBlockPLOT3DReader::GetNumberOfGrids ( ) [inline]

This returns the number of outputs this reader will produce. This number is equal to the number of grids in the current file. This method has to be called before getting any output if the number of outputs will be greater than 1 (the first output is always the same). Note that every time this method is invoked, the header file is opened and part of the header is read.
Definition at line 118 of file vtkMultiBlockPLOT3DReader.h.

virtual void vtkMultiBlockPLOT3DReader::SetBinaryFile ( int ) [virtual]

Is the file to be read written in binary format (as opposed to ascii).

virtual int vtkMultiBlockPLOT3DReader::GetBinaryFile ( ) [virtual]

Is the file to be read written in binary format (as opposed to ascii).

virtual void vtkMultiBlockPLOT3DReader::BinaryFileOn ( ) [virtual]

Is the file to be read written in binary format (as opposed to ascii).

virtual void vtkMultiBlockPLOT3DReader::BinaryFileOff ( ) [virtual]

Is the file to be read written in binary format (as opposed to ascii).

virtual void vtkMultiBlockPLOT3DReader::SetMultiGrid ( int ) [virtual]

Does the file to be read contain information about number of grids. In some PLOT3D files, the first value contains the number of grids (even if there is only 1). If reading such a file, set this to true.

virtual int vtkMultiBlockPLOT3DReader::GetMultiGrid ( ) [virtual]

Does the file to be read contain information about number of grids. In some PLOT3D files, the first value contains the number of grids (even if there is only 1). If reading such a file, set this to true.

virtual void vtkMultiBlockPLOT3DReader::MultiGridOn ( ) [virtual]

Does the file to be read contain information about number of grids. In some PLOT3D files, the first value contains the number of grids (even if there is only 1). If reading such a file, set this to true.

virtual void vtkMultiBlockPLOT3DReader::MultiGridOff ( ) [virtual]

Does the file to be read contain information about number of grids. In some PLOT3D files, the first value contains the number of grids (even if there is only 1). If reading such a file, set this to true.

virtual void vtkMultiBlockPLOT3DReader::SetHasByteCount ( int ) [virtual]

Were the arrays written with leading and trailing byte counts ? Usually, files written by a fortran program will contain these byte counts whereas the ones written by C/C++ won't.

virtual int vtkMultiBlockPLOT3DReader::GetHasByteCount ( ) [virtual]

Were the arrays written with leading and trailing byte counts ? Usually, files written by a fortran program will contain these byte counts whereas the ones written by C/C++ won't.

virtual void vtkMultiBlockPLOT3DReader::HasByteCountOn ( ) [virtual]

Were the arrays written with leading and trailing byte counts ? Usually, files written by a fortran program will contain these byte counts whereas the ones written by C/C++ won't.

virtual void vtkMultiBlockPLOT3DReader::HasByteCountOff ( ) [virtual]

Were the arrays written with leading and trailing byte counts ? Usually, files written by a fortran program will contain these byte counts whereas the ones written by C/C++ won't.

virtual void vtkMultiBlockPLOT3DReader::SetIBlanking ( int ) [virtual]

Is there iblanking (point visibility) information in the file. If there is iblanking arrays, these will be read and assigned to the PointVisibility array of the output.

virtual int vtkMultiBlockPLOT3DReader::GetIBlanking ( ) [virtual]

Is there iblanking (point visibility) information in the file. If there is iblanking arrays, these will be read and assigned to the PointVisibility array of the output.

virtual void vtkMultiBlockPLOT3DReader::IBlankingOn ( ) [virtual]

Is there iblanking (point visibility) information in the file. If there is iblanking arrays, these will be read and assigned to the PointVisibility array of the output.

virtual void vtkMultiBlockPLOT3DReader::IBlankingOff ( ) [virtual]

Is there iblanking (point visibility) information in the file. If there is iblanking arrays, these will be read and assigned to the PointVisibility array of the output.

virtual void vtkMultiBlockPLOT3DReader::SetTwoDimensionalGeometry ( int ) [virtual]

If only two-dimensional data was written to the file, turn this on.

virtual int vtkMultiBlockPLOT3DReader::GetTwoDimensionalGeometry ( ) [virtual]

If only two-dimensional data was written to the file, turn this on.

virtual void vtkMultiBlockPLOT3DReader::TwoDimensionalGeometryOn ( ) [virtual]

If only two-dimensional data was written to the file, turn this on.

virtual void vtkMultiBlockPLOT3DReader::TwoDimensionalGeometryOff ( ) [virtual]

If only two-dimensional data was written to the file, turn this on.

virtual void vtkMultiBlockPLOT3DReader::SetForceRead ( int ) [virtual]

Try to read a binary file even if the file length seems to be inconsistent with the header information. Use this with caution, if the file length is not the same as calculated from the header. either the file is corrupt or the settings are wrong.

virtual int vtkMultiBlockPLOT3DReader::GetForceRead ( ) [virtual]

Try to read a binary file even if the file length seems to be inconsistent with the header information. Use this with caution, if the file length is not the same as calculated from the header. either the file is corrupt or the settings are wrong.

virtual void vtkMultiBlockPLOT3DReader::ForceReadOn ( ) [virtual]

Try to read a binary file even if the file length seems to be inconsistent with the header information. Use this with caution, if the file length is not the same as calculated from the header. either the file is corrupt or the settings are wrong.

virtual void vtkMultiBlockPLOT3DReader::ForceReadOff ( ) [virtual]

Try to read a binary file even if the file length seems to be inconsistent with the header information. Use this with caution, if the file length is not the same as calculated from the header. either the file is corrupt or the settings are wrong.

void vtkMultiBlockPLOT3DReader::SetByteOrderToBigEndian ( )

Set the byte order of the file (remember, more Unix workstations write big endian whereas PCs write little endian). Default is big endian (since most older PLOT3D files were written by workstations).

void vtkMultiBlockPLOT3DReader::SetByteOrderToLittleEndian ( )

Set the byte order of the file (remember, more Unix workstations write big endian whereas PCs write little endian). Default is big endian (since most older PLOT3D files were written by workstations).

virtual void vtkMultiBlockPLOT3DReader::SetByteOrder ( int ) [virtual]

Set the byte order of the file (remember, more Unix workstations write big endian whereas PCs write little endian). Default is big endian (since most older PLOT3D files were written by workstations).

virtual int vtkMultiBlockPLOT3DReader::GetByteOrder ( ) [virtual]

Set the byte order of the file (remember, more Unix workstations write big endian whereas PCs write little endian). Default is big endian (since most older PLOT3D files were written by workstations).

const char* vtkMultiBlockPLOT3DReader::GetByteOrderAsString ( )

Set the byte order of the file (remember, more Unix workstations write big endian whereas PCs write little endian). Default is big endian (since most older PLOT3D files were written by workstations).

virtual void vtkMultiBlockPLOT3DReader::SetR ( double ) [virtual]

Set/Get the gas constant. Default is 1.0.

virtual double vtkMultiBlockPLOT3DReader::GetR ( ) [virtual]

Set/Get the gas constant. Default is 1.0.

virtual void vtkMultiBlockPLOT3DReader::SetGamma ( double ) [virtual]

Set/Get the ratio of specific heats. Default is 1.4.

virtual double vtkMultiBlockPLOT3DReader::GetGamma ( ) [virtual]

Set/Get the ratio of specific heats. Default is 1.4.

virtual void vtkMultiBlockPLOT3DReader::SetUvinf ( double ) [virtual]

Set/Get the x-component of the free-stream velocity. Default is 1.0.

virtual double vtkMultiBlockPLOT3DReader::GetUvinf ( ) [virtual]

Set/Get the x-component of the free-stream velocity. Default is 1.0.

virtual void vtkMultiBlockPLOT3DReader::SetVvinf ( double ) [virtual]

Set/Get the y-component of the free-stream velocity. Default is 1.0.

virtual double vtkMultiBlockPLOT3DReader::GetVvinf ( ) [virtual]

Set/Get the y-component of the free-stream velocity. Default is 1.0.

virtual void vtkMultiBlockPLOT3DReader::SetWvinf ( double ) [virtual]

Set/Get the z-component of the free-stream velocity. Default is 1.0.

virtual double vtkMultiBlockPLOT3DReader::GetWvinf ( ) [virtual]

Set/Get the z-component of the free-stream velocity. Default is 1.0.

void vtkMultiBlockPLOT3DReader::SetScalarFunctionNumber ( int num )

Specify the scalar function to extract. If ==(-1), then no scalar function is extracted.

virtual int vtkMultiBlockPLOT3DReader::GetScalarFunctionNumber ( ) [virtual]

Specify the scalar function to extract. If ==(-1), then no scalar function is extracted.

void vtkMultiBlockPLOT3DReader::SetVectorFunctionNumber ( int num )

Specify the vector function to extract. If ==(-1), then no vector function is extracted.

virtual int vtkMultiBlockPLOT3DReader::GetVectorFunctionNumber ( ) [virtual]

Specify the vector function to extract. If ==(-1), then no vector function is extracted.

void vtkMultiBlockPLOT3DReader::AddFunction ( int functionNumber )

Specify additional functions to read. These are placed into the point data as data arrays. Later on they can be used by labeling them as scalars, etc.

void vtkMultiBlockPLOT3DReader::RemoveFunction ( int )

Specify additional functions to read. These are placed into the point data as data arrays. Later on they can be used by labeling them as scalars, etc.

void vtkMultiBlockPLOT3DReader::RemoveAllFunctions ( )

Specify additional functions to read. These are placed into the point data as data arrays. Later on they can be used by labeling them as scalars, etc.

virtual int vtkMultiBlockPLOT3DReader::CanReadBinaryFile ( const char * fname ) [virtual]

Return 1 if the reader can read the given file name. Only meaningful for binary files.

int vtkMultiBlockPLOT3DReader::GenerateDefaultConfiguration ( )

int vtkMultiBlockPLOT3DReader::CheckFile ( FILE *& fp,

const char * fname

) [protected]

int vtkMultiBlockPLOT3DReader::CheckGeometryFile ( FILE *& xyzFp ) [protected]

int vtkMultiBlockPLOT3DReader::CheckSolutionFile ( FILE *& qFp ) [protected]

void vtkMultiBlockPLOT3DReader::SkipByteCount ( FILE * fp ) [protected]

int vtkMultiBlockPLOT3DReader::ReadIntBlock ( FILE * fp,

int n,

int * block

) [protected]

int vtkMultiBlockPLOT3DReader::ReadFloatBlock ( FILE * fp,

int n,

float * block

) [protected]

int vtkMultiBlockPLOT3DReader::GetNumberOfBlocksInternal ( FILE * xyzFp,

int verify = 1

) [protected]

int vtkMultiBlockPLOT3DReader::ReadGeometryHeader ( FILE * fp ) [protected]

int vtkMultiBlockPLOT3DReader::ReadQHeader ( FILE * fp ) [protected]

void vtkMultiBlockPLOT3DReader::CalculateFileSize ( FILE * fp ) [protected]

long vtkMultiBlockPLOT3DReader::EstimateSize ( int ni,

int nj,

int nk

) [protected]

void vtkMultiBlockPLOT3DReader::AssignAttribute ( int fNumber,

vtkStructuredGrid * output,

int attributeType

) [protected]

void vtkMultiBlockPLOT3DReader::MapFunction ( int fNumber,

vtkStructuredGrid * output

) [protected]

void vtkMultiBlockPLOT3DReader::ComputeTemperature ( vtkStructuredGrid * output ) [protected]

void vtkMultiBlockPLOT3DReader::ComputePressure ( vtkStructuredGrid * output ) [protected]

void vtkMultiBlockPLOT3DReader::ComputeEnthalpy ( vtkStructuredGrid * output ) [protected]

void vtkMultiBlockPLOT3DReader::ComputeKineticEnergy ( vtkStructuredGrid * output ) [protected]

void vtkMultiBlockPLOT3DReader::ComputeVelocityMagnitude ( vtkStructuredGrid * output ) [protected]

void vtkMultiBlockPLOT3DReader::ComputeEntropy ( vtkStructuredGrid * output ) [protected]

void vtkMultiBlockPLOT3DReader::ComputeSwirl ( vtkStructuredGrid * output ) [protected]

void vtkMultiBlockPLOT3DReader::ComputeVelocity ( vtkStructuredGrid * output ) [protected]

void vtkMultiBlockPLOT3DReader::ComputeVorticity ( vtkStructuredGrid * output ) [protected]

void vtkMultiBlockPLOT3DReader::ComputePressureGradient ( vtkStructuredGrid * output ) [protected]

void vtkMultiBlockPLOT3DReader::ClearGeometryCache ( ) [protected]

int vtkMultiBlockPLOT3DReader::VerifySettings ( char * buf,

int bufSize

) [protected]

void vtkMultiBlockPLOT3DReader::ReadIntBlockV ( char ** buf,

int n,

int * block

) [protected]

void vtkMultiBlockPLOT3DReader::SkipByteCountV ( char ** buf ) [protected]

virtual int vtkMultiBlockPLOT3DReader::FillOutputPortInformation ( int port,

vtkInformation * info

) [protected, virtual]

Fill the output port information objects for this algorithm. This is invoked by the first call to GetOutputPortInformation for each port so subclasses can specify what they can handle.
Reimplemented from vtkHierarchicalDataSetAlgorithm.

virtual int vtkMultiBlockPLOT3DReader::RequestData ( vtkInformation * ,

vtkInformationVector ** ,

vtkInformationVector *

) [protected, virtual]

This is called by the superclass. This is the method you should override.
Reimplemented from vtkHierarchicalDataSetAlgorithm.

virtual int vtkMultiBlockPLOT3DReader::RequestInformation ( vtkInformation * ,

vtkInformationVector ** ,

vtkInformationVector *

) [protected, virtual]

This is called by the superclass. This is the method you should override.
Reimplemented from vtkHierarchicalDataSetAlgorithm.

Member Data Documentation

char* vtkMultiBlockPLOT3DReader::XYZFileName [protected]

Definition at line 291 of file vtkMultiBlockPLOT3DReader.h.

char* vtkMultiBlockPLOT3DReader::QFileName [protected]

Definition at line 292 of file vtkMultiBlockPLOT3DReader.h.

int vtkMultiBlockPLOT3DReader::BinaryFile [protected]

Definition at line 294 of file vtkMultiBlockPLOT3DReader.h.

int vtkMultiBlockPLOT3DReader::HasByteCount [protected]

Definition at line 295 of file vtkMultiBlockPLOT3DReader.h.

int vtkMultiBlockPLOT3DReader::TwoDimensionalGeometry [protected]

Definition at line 296 of file vtkMultiBlockPLOT3DReader.h.

int vtkMultiBlockPLOT3DReader::MultiGrid [protected]

Definition at line 297 of file vtkMultiBlockPLOT3DReader.h.

int vtkMultiBlockPLOT3DReader::ForceRead [protected]

Definition at line 298 of file vtkMultiBlockPLOT3DReader.h.

int vtkMultiBlockPLOT3DReader::ByteOrder [protected]

Definition at line 299 of file vtkMultiBlockPLOT3DReader.h.

int vtkMultiBlockPLOT3DReader::IBlanking [protected]

Definition at line 300 of file vtkMultiBlockPLOT3DReader.h.

long vtkMultiBlockPLOT3DReader::FileSize [protected]

Definition at line 302 of file vtkMultiBlockPLOT3DReader.h.

double vtkMultiBlockPLOT3DReader::R [protected]

Definition at line 305 of file vtkMultiBlockPLOT3DReader.h.

double vtkMultiBlockPLOT3DReader::Gamma [protected]

Definition at line 306 of file vtkMultiBlockPLOT3DReader.h.

double vtkMultiBlockPLOT3DReader::Uvinf [protected]

Definition at line 307 of file vtkMultiBlockPLOT3DReader.h.

double vtkMultiBlockPLOT3DReader::Vvinf [protected]

Definition at line 308 of file vtkMultiBlockPLOT3DReader.h.

double vtkMultiBlockPLOT3DReader::Wvinf [protected]

Definition at line 309 of file vtkMultiBlockPLOT3DReader.h.

vtkIntArray* vtkMultiBlockPLOT3DReader::FunctionList [protected]

Definition at line 312 of file vtkMultiBlockPLOT3DReader.h.

int vtkMultiBlockPLOT3DReader::ScalarFunctionNumber [protected]

Definition at line 314 of file vtkMultiBlockPLOT3DReader.h.

int vtkMultiBlockPLOT3DReader::VectorFunctionNumber [protected]

Definition at line 315 of file vtkMultiBlockPLOT3DReader.h.

vtkFloatArray** vtkMultiBlockPLOT3DReader::PointCache [protected]

Definition at line 318 of file vtkMultiBlockPLOT3DReader.h.

vtkUnsignedCharArray** vtkMultiBlockPLOT3DReader::IBlankCache [protected]

Definition at line 319 of file vtkMultiBlockPLOT3DReader.h.

The documentation for this class was generated from the following file:

dox/IO/vtkMultiBlockPLOT3DReader.h

Generated on Tue Jan 22 00:02:21 2008 for VTK by

1.4.3-20050530


Public Types
typedef vtkHierarchicalDataSetAlgorithm	Superclass
enum	{ FILE_BIG_ENDIAN = 0, FILE_LITTLE_ENDIAN = 1 }
Public Member Functions
virtual const char *	GetClassName ()
virtual int	IsA (const char *type)
virtual int	CanReadBinaryFile (const char *fname)
int	GenerateDefaultConfiguration ()

void	PrintSelf (ostream &os, vtkIndent indent)
void	SetFileName (const char *name)
const char *	GetFileName ()
virtual void	SetXYZFileName (const char *)
virtual char *	GetXYZFileName ()

virtual void	SetQFileName (const char *)
virtual char *	GetQFileName ()

int	GetNumberOfBlocks ()
int	GetNumberOfGrids ()

virtual void	SetBinaryFile (int)
virtual int	GetBinaryFile ()
virtual void	BinaryFileOn ()
virtual void	BinaryFileOff ()

virtual void	SetMultiGrid (int)
virtual int	GetMultiGrid ()
virtual void	MultiGridOn ()
virtual void	MultiGridOff ()

virtual void	SetHasByteCount (int)
virtual int	GetHasByteCount ()
virtual void	HasByteCountOn ()
virtual void	HasByteCountOff ()

virtual void	SetIBlanking (int)
virtual int	GetIBlanking ()
virtual void	IBlankingOn ()
virtual void	IBlankingOff ()

virtual void	SetTwoDimensionalGeometry (int)
virtual int	GetTwoDimensionalGeometry ()
virtual void	TwoDimensionalGeometryOn ()
virtual void	TwoDimensionalGeometryOff ()

virtual void	SetForceRead (int)
virtual int	GetForceRead ()
virtual void	ForceReadOn ()
virtual void	ForceReadOff ()

void	SetByteOrderToBigEndian ()
void	SetByteOrderToLittleEndian ()
virtual void	SetByteOrder (int)
virtual int	GetByteOrder ()
const char *	GetByteOrderAsString ()

virtual void	SetR (double)
virtual double	GetR ()

virtual void	SetGamma (double)
virtual double	GetGamma ()

virtual void	SetUvinf (double)
virtual double	GetUvinf ()

virtual void	SetVvinf (double)
virtual double	GetVvinf ()

virtual void	SetWvinf (double)
virtual double	GetWvinf ()

void	SetScalarFunctionNumber (int num)
virtual int	GetScalarFunctionNumber ()

void	SetVectorFunctionNumber (int num)
virtual int	GetVectorFunctionNumber ()

void	AddFunction (int functionNumber)
void	RemoveFunction (int)
void	RemoveAllFunctions ()
Static Public Member Functions
static vtkMultiBlockPLOT3DReader *	New ()
static int	IsTypeOf (const char *type)
static vtkMultiBlockPLOT3DReader *	SafeDownCast (vtkObject *o)
Protected Member Functions
	vtkMultiBlockPLOT3DReader ()
	~vtkMultiBlockPLOT3DReader ()
int	CheckFile (FILE &fp, const char fname)
int	CheckGeometryFile (FILE *&xyzFp)
int	CheckSolutionFile (FILE *&qFp)
void	SkipByteCount (FILE *fp)
int	ReadIntBlock (FILE fp, int n, int block)
int	ReadFloatBlock (FILE fp, int n, float block)
int	GetNumberOfBlocksInternal (FILE *xyzFp, int verify=1)
int	ReadGeometryHeader (FILE *fp)
int	ReadQHeader (FILE *fp)
void	CalculateFileSize (FILE *fp)
long	EstimateSize (int ni, int nj, int nk)
void	AssignAttribute (int fNumber, vtkStructuredGrid *output, int attributeType)
void	MapFunction (int fNumber, vtkStructuredGrid *output)
void	ComputeTemperature (vtkStructuredGrid *output)
void	ComputePressure (vtkStructuredGrid *output)
void	ComputeEnthalpy (vtkStructuredGrid *output)
void	ComputeKineticEnergy (vtkStructuredGrid *output)
void	ComputeVelocityMagnitude (vtkStructuredGrid *output)
void	ComputeEntropy (vtkStructuredGrid *output)
void	ComputeSwirl (vtkStructuredGrid *output)
void	ComputeVelocity (vtkStructuredGrid *output)
void	ComputeVorticity (vtkStructuredGrid *output)
void	ComputePressureGradient (vtkStructuredGrid *output)
void	ClearGeometryCache ()
int	VerifySettings (char *buf, int bufSize)
void	ReadIntBlockV (char *buf, int n, int block)
void	SkipByteCountV (char **buf)
virtual int	FillOutputPortInformation (int port, vtkInformation *info)
virtual int	RequestData (vtkInformation , vtkInformationVector , vtkInformationVector )
virtual int	RequestInformation (vtkInformation , vtkInformationVector , vtkInformationVector )
Protected Attributes
char *	XYZFileName
char *	QFileName
int	BinaryFile
int	HasByteCount
int	TwoDimensionalGeometry
int	MultiGrid
int	ForceRead
int	ByteOrder
int	IBlanking
long	FileSize
double	R
double	Gamma
double	Uvinf
double	Vvinf
double	Wvinf
vtkIntArray *	FunctionList
int	ScalarFunctionNumber
int	VectorFunctionNumber
vtkFloatArray **	PointCache
vtkUnsignedCharArray **	IBlankCache