#include "vtkIOXMLModule.h"
#include "vtkType.h"

Include dependency graph for vtkXMLWriterC.h:

This graph shows which files directly or indirectly include this file:

Typedefs
typedef struct vtkXMLWriterC_s	vtkXMLWriterC
	vtkXMLWriterC is an opaque structure holding the state of an individual writer object.
Functions
VTKIOXML_EXPORT vtkXMLWriterC *	vtkXMLWriterC_New ()
	Create a new instance of vtkXMLWriterC.
VTKIOXML_EXPORT void	vtkXMLWriterC_Delete (vtkXMLWriterC *self)
	Delete the writer object.
VTKIOXML_EXPORT void	vtkXMLWriterC_SetDataObjectType (vtkXMLWriterC *self, int objType)
	Set the VTK data object type that will be written.
VTKIOXML_EXPORT void	vtkXMLWriterC_SetDataModeType (vtkXMLWriterC *self, int datamodetype)
	Set the VTK writer data mode to either:
VTKIOXML_EXPORT void	vtkXMLWriterC_SetExtent (vtkXMLWriterC *self, int extent[6])
	Set the extent of a structured data set.
VTKIOXML_EXPORT void	vtkXMLWriterC_SetPoints (vtkXMLWriterC self, int dataType, void data, vtkIdType numPoints)
	Set the points of a point data set.
VTKIOXML_EXPORT void	vtkXMLWriterC_SetOrigin (vtkXMLWriterC *self, double origin[3])
	Set the origin of an image data set.
VTKIOXML_EXPORT void	vtkXMLWriterC_SetSpacing (vtkXMLWriterC *self, double spacing[3])
	Set the spacing of an image data set.
VTKIOXML_EXPORT void	vtkXMLWriterC_SetCoordinates (vtkXMLWriterC self, int axis, int dataType, void data, vtkIdType numCoordinates)
	Set the coordinates along one axis of a rectilinear grid data set.
VTKIOXML_EXPORT void	vtkXMLWriterC_SetCellsWithType (vtkXMLWriterC self, int cellType, vtkIdType ncells, vtkIdType cells, vtkIdType cellsSize)
	Set a cell array on the data object to be written.
VTKIOXML_EXPORT void	vtkXMLWriterC_SetCellsWithTypes (vtkXMLWriterC self, int cellTypes, vtkIdType ncells, vtkIdType *cells, vtkIdType cellsSize)
	Set a cell array on the data object to be written.
VTKIOXML_EXPORT void	vtkXMLWriterC_SetPointData (vtkXMLWriterC self, const char name, int dataType, void data, vtkIdType numTuples, int numComponents, const char role)
	Set a point or cell data array by name.
VTKIOXML_EXPORT void	vtkXMLWriterC_SetCellData (vtkXMLWriterC self, const char name, int dataType, void data, vtkIdType numTuples, int numComponents, const char role)
VTKIOXML_EXPORT void	vtkXMLWriterC_SetFileName (vtkXMLWriterC self, const char fileName)
	Set the name of the file into which the data are to be written.
VTKIOXML_EXPORT int	vtkXMLWriterC_Write (vtkXMLWriterC *self)
	Write the data to a file immediately.
VTKIOXML_EXPORT void	vtkXMLWriterC_SetNumberOfTimeSteps (vtkXMLWriterC *self, int numTimeSteps)
	Set the number of time steps that will be written between upcoming Start and Stop calls.
VTKIOXML_EXPORT void	vtkXMLWriterC_Start (vtkXMLWriterC *self)
	Start writing a time-series to the output file.
VTKIOXML_EXPORT void	vtkXMLWriterC_WriteNextTimeStep (vtkXMLWriterC *self, double timeValue)
	Write one time step of a time-series to the output file.
VTKIOXML_EXPORT void	vtkXMLWriterC_Stop (vtkXMLWriterC *self)
	Stop writing a time-series to the output file.

Typedef Documentation

typedef struct vtkXMLWriterC_s vtkXMLWriterC

vtkXMLWriterC is an opaque structure holding the state of an individual writer object.

It can be used to write VTK XML files.

Definition at line 30 of file vtkXMLWriterC.h.

Function Documentation

VTKIOXML_EXPORT vtkXMLWriterC* vtkXMLWriterC_New ( )

Create a new instance of vtkXMLWriterC.

Returns the object or NULL on failure.

VTKIOXML_EXPORT void vtkXMLWriterC_Delete ( vtkXMLWriterC * self )

Delete the writer object.

This should not be called between Start and Stop calls.

VTKIOXML_EXPORT void vtkXMLWriterC_SetDataObjectType	(	vtkXMLWriterC *	self,
		int	objType
	)

Set the VTK data object type that will be written.

This initializes an empty data object of the given type.

This must be set before setting geometry or data information can can be set only once per writer object.

VTKIOXML_EXPORT void vtkXMLWriterC_SetDataModeType	(	vtkXMLWriterC *	self,
		int	datamodetype
	)

Set the VTK writer data mode to either:

Ascii
Binary
Appended (default)

This may be used only after SetDataObjectType has been called.

VTKIOXML_EXPORT void vtkXMLWriterC_SetExtent	(	vtkXMLWriterC *	self,
		int	extent[6]
	)

Set the extent of a structured data set.

This may be used only after SetDataObjectType has been called with a structured data object type.

VTKIOXML_EXPORT void vtkXMLWriterC_SetPoints	(	vtkXMLWriterC *	self,
		int	dataType,
		void *	data,
		vtkIdType	numPoints
	)

Set the points of a point data set.

For structured data, the number of points must match number of points indicated by the extent.

Use dataType to specify the scalar type used in the given array. The data array must have numPoints*3 entries specifying 3-D points.

This may not be used for data objects with implicit points. It may not be called before SetDataObjectType or between Start and Stop calls.

VTKIOXML_EXPORT void vtkXMLWriterC_SetOrigin	(	vtkXMLWriterC *	self,
		double	origin[3]
	)

Set the origin of an image data set.

This may only be used for image data. It may not be called before SetDataObjectType or between Start and Stop calls.

VTKIOXML_EXPORT void vtkXMLWriterC_SetSpacing	(	vtkXMLWriterC *	self,
		double	spacing[3]
	)

Set the spacing of an image data set.

This may only be used for image data. It may not be called before SetDataObjectType or between Start and Stop calls.

VTKIOXML_EXPORT void vtkXMLWriterC_SetCoordinates	(	vtkXMLWriterC *	self,
		int	axis,
		int	dataType,
		void *	data,
		vtkIdType	numCoordinates
	)

Set the coordinates along one axis of a rectilinear grid data set.

Specify axis 0 for X, 1 for Y, and 2 for Z. Use dataType to specify the scalar type used in the given data array. Use numCoordinates to specify the number of such values in the array. The number of values must match that specified by the extent for the given axis.

This may only be used for rectilinear grids. It may not be called before SetDataObjectType or between Start and Stop calls.

VTKIOXML_EXPORT void vtkXMLWriterC_SetCellsWithType	(	vtkXMLWriterC *	self,
		int	cellType,
		vtkIdType	ncells,
		vtkIdType *	cells,
		vtkIdType	cellsSize
	)

Set a cell array on the data object to be written.

All cells must have the same type.

For unstructured grid data objects, the cellType can be any type. For polygonal data objects, the cellType must be VTK_VERTEX, VTK_POLY_VERTEX, VTK_LINE, VTK_POLY_LINE, VTK_TRIANGLE, VTK_TRIANGLE_STRIP, or cyclically connected simple cell type such as VTK_POLYGON.

The cells array must have cellsSize entries. Each cell uses N+1 entries where N is the number of points in the cell. The layout of the array for each cell is "[N,id1,id2,...,idN]". The total number of cells must be ncells.

This may only be used for unstructured grid and polygonal data types. It may not be called before SetDataObjectType or between Start and Stop calls.

VTKIOXML_EXPORT void vtkXMLWriterC_SetCellsWithTypes	(	vtkXMLWriterC *	self,
		int *	cellTypes,
		vtkIdType	ncells,
		vtkIdType *	cells,
		vtkIdType	cellsSize
	)

Set a cell array on the data object to be written.

Each cell can have its own type.

The cellTypes array specifies the type of each cell, and has ncells entries. The cells array must have cellsSize entries. Each cell uses N+1 entries where N is the number of points in the cell. The layout of the array for each cell is "[N,id1,id2,...,idN]". The total number of cells must be ncells.

This may only be used for unstructured grid data objects. It may not be called before SetDataObjectType or between Start and Stop calls.

VTKIOXML_EXPORT void vtkXMLWriterC_SetPointData	(	vtkXMLWriterC *	self,
		const char *	name,
		int	dataType,
		void *	data,
		vtkIdType	numTuples,
		int	numComponents,
		const char *	role
	)

Set a point or cell data array by name.

The name of the array is required and should describe the purpose of the data. Use dataType to specify the scalar type used in the given data array. Use numTuples to specify the number of tuples and numComponents to specify the number of scalar components in each tuple.

The data array must have exactly numTuples*numComponents entries. For SetPointData, numTuples must be equal to the number of points indicated by SetExtent and/or SetPoints. For SetCellData, numTuples must be equal to the total number of cells set by SetCells.

The role can be one of "SCALARS", "VECTORS", "NORMALS", "TENSORS", or "TCOORDS" and specifies that the array should be designated as the active array for the named role. Other values for role are ignored.

This may be used for all data types. It may not be called before SetDataObjectType but may be called between Start and Stop calls.

VTKIOXML_EXPORT void vtkXMLWriterC_SetCellData	(	vtkXMLWriterC *	self,
		const char *	name,
		int	dataType,
		void *	data,
		vtkIdType	numTuples,
		int	numComponents,
		const char *	role
	)

VTKIOXML_EXPORT void vtkXMLWriterC_SetFileName	(	vtkXMLWriterC *	self,
		const char *	fileName
	)

Set the name of the file into which the data are to be written.

This may be used for all data types. It may not be called before SetDataObjectType or between Start and Stop calls.

VTKIOXML_EXPORT int vtkXMLWriterC_Write ( vtkXMLWriterC * self )

Write the data to a file immediately.

This is not used when writing time-series data. Returns 1 for success and 0 for failure.

This may only be called after SetFileName and SetDataObjectType.

VTKIOXML_EXPORT void vtkXMLWriterC_SetNumberOfTimeSteps	(	vtkXMLWriterC *	self,
		int	numTimeSteps
	)

Set the number of time steps that will be written between upcoming Start and Stop calls.

This is used when writing time-series data.

This may be used for all data types. It may not be called before SetDataObjectType or between Start and Stop calls.

VTKIOXML_EXPORT void vtkXMLWriterC_Start ( vtkXMLWriterC * self )

Start writing a time-series to the output file.

This may only be called after SetFileName, SetDataObjectType, and SetNumberOfTimeSteps. It may not be called a second time until after an intervening call to Stop.

VTKIOXML_EXPORT void vtkXMLWriterC_WriteNextTimeStep	(	vtkXMLWriterC *	self,
		double	timeValue
	)

Write one time step of a time-series to the output file.

The current data set by SetPointData and SetCellData will be written.

Use timeValue to specify the time associated with the time step being written.

This may only be called after Start has been called. It should be called NumberOfTimeSteps times before calling Stop.

VTKIOXML_EXPORT void vtkXMLWriterC_Stop ( vtkXMLWriterC * self )

Stop writing a time-series to the output file.

This may only be called after Start and NumberOfTimeSteps calls to WriteNextTimeStep.

Typedefs

Functions

Typedef Documentation

Function Documentation