|
| virtual int | IsA (const char *type) |
| | Return 1 if this class is the same type of (or a subclass of) the named class. More...
|
| |
| vtkHAVSVolumeMapper * | NewInstance () const |
| |
| void | PrintSelf (ostream &os, vtkIndent indent) override |
| | Methods invoked by print to print information about the object including superclasses. More...
|
| |
| virtual bool | SupportedByHardware (vtkRenderer *vtkNotUsed(r)) |
| | Check hardware support for the HAVS algorithm. More...
|
| |
|
| virtual void | SetPartiallyRemoveNonConvexities (bool) |
| | regions by removing ray segments larger than the max cell size. More...
|
| |
| virtual bool | GetPartiallyRemoveNonConvexities () |
| | regions by removing ray segments larger than the max cell size. More...
|
| |
|
| virtual void | SetLevelOfDetailTargetTime (float) |
| | Set/get the desired level of detail target time measured in frames/sec. More...
|
| |
| virtual float | GetLevelOfDetailTargetTime () |
| | Set/get the desired level of detail target time measured in frames/sec. More...
|
| |
|
| virtual void | SetLevelOfDetail (bool) |
| | Turn on/off level-of-detail volume rendering. More...
|
| |
| virtual bool | GetLevelOfDetail () |
| | Turn on/off level-of-detail volume rendering. More...
|
| |
|
| void | SetLevelOfDetailMethod (int) |
| | Set/get the current level-of-detail method. More...
|
| |
| virtual int | GetLevelOfDetailMethod () |
| | Set/get the current level-of-detail method. More...
|
| |
| void | SetLevelOfDetailMethodField () |
| | Set/get the current level-of-detail method. More...
|
| |
| void | SetLevelOfDetailMethodArea () |
| | Set/get the current level-of-detail method. More...
|
| |
|
| virtual void | SetKBufferSize (int) |
| | Set the kbuffer size. More...
|
| |
| virtual int | GetKBufferSize () |
| | Set the kbuffer size. More...
|
| |
| void | SetKBufferSizeTo2 () |
| | Set the kbuffer size. More...
|
| |
| void | SetKBufferSizeTo6 () |
| | Set the kbuffer size. More...
|
| |
|
| virtual void | SetGPUDataStructures (bool)=0 |
| | Set/get whether or not the data structures should be stored on the GPU for better peformance. More...
|
| |
| virtual bool | GetGPUDataStructures () |
| | Set/get whether or not the data structures should be stored on the GPU for better peformance. More...
|
| |
| vtkUnstructuredGridVolumeMapper * | NewInstance () const |
| |
| void | PrintSelf (ostream &os, vtkIndent indent) |
| | Methods invoked by print to print information about the object including superclasses. More...
|
| |
| virtual void | SetBlendMode (int) |
| |
| void | SetBlendModeToComposite () |
| |
| void | SetBlendModeToMaximumIntensity () |
| |
| virtual int | GetBlendMode () |
| |
| virtual void | Render (vtkRenderer *ren, vtkVolume *vol)=0 |
| | WARNING: INTERNAL METHOD - NOT INTENDED FOR GENERAL USE DO NOT USE THIS METHOD OUTSIDE OF THE RENDERING PROCESS Render the volume. More...
|
| |
| virtual void | ReleaseGraphicsResources (vtkWindow *) |
| | WARNING: INTERNAL METHOD - NOT INTENDED FOR GENERAL USE Release any graphics resources that are being consumed by this mapper. More...
|
| |
| virtual void | SetInputData (vtkUnstructuredGridBase *) |
| | Set/Get the input data. More...
|
| |
| virtual void | SetInputData (vtkDataSet *) |
| | Set/Get the input data. More...
|
| |
| vtkUnstructuredGridBase * | GetInput () |
| | Set/Get the input data. More...
|
| |
| vtkAbstractVolumeMapper * | NewInstance () const |
| |
| virtual char * | GetArrayName () |
| | Get the array name or number and component to use for rendering. More...
|
| |
| virtual int | GetArrayId () |
| |
| virtual int | GetArrayAccessMode () |
| |
| const char * | GetScalarModeAsString () |
| | Return the method for obtaining scalar data. More...
|
| |
| vtkDataSet * | GetDataSetInput () |
| | Set/Get the input data. More...
|
| |
| vtkDataObject * | GetDataObjectInput () |
| | Set/Get the input data. More...
|
| |
| virtual double * | GetBounds () |
| | Return bounding box (array of six doubles) of data expressed as (xmin,xmax, ymin,ymax, zmin,zmax). More...
|
| |
| virtual void | GetBounds (double bounds[6]) |
| | Return bounding box (array of six doubles) of data expressed as (xmin,xmax, ymin,ymax, zmin,zmax). More...
|
| |
| virtual void | SetScalarMode (int) |
| | Control how the mapper works with scalar point data and cell attribute data. More...
|
| |
| virtual int | GetScalarMode () |
| | Control how the mapper works with scalar point data and cell attribute data. More...
|
| |
| void | SetScalarModeToDefault () |
| | Control how the mapper works with scalar point data and cell attribute data. More...
|
| |
| void | SetScalarModeToUsePointData () |
| | Control how the mapper works with scalar point data and cell attribute data. More...
|
| |
| void | SetScalarModeToUseCellData () |
| | Control how the mapper works with scalar point data and cell attribute data. More...
|
| |
| void | SetScalarModeToUsePointFieldData () |
| | Control how the mapper works with scalar point data and cell attribute data. More...
|
| |
| void | SetScalarModeToUseCellFieldData () |
| | Control how the mapper works with scalar point data and cell attribute data. More...
|
| |
| virtual void | SelectScalarArray (int arrayNum) |
| | When ScalarMode is set to UsePointFieldData or UseCellFieldData, you can specify which scalar array to use during rendering. More...
|
| |
| virtual void | SelectScalarArray (const char *arrayName) |
| | When ScalarMode is set to UsePointFieldData or UseCellFieldData, you can specify which scalar array to use during rendering. More...
|
| |
| virtual float | GetGradientMagnitudeScale () |
| | WARNING: INTERNAL METHOD - NOT INTENDED FOR GENERAL USE. More...
|
| |
| virtual float | GetGradientMagnitudeBias () |
| | WARNING: INTERNAL METHOD - NOT INTENDED FOR GENERAL USE. More...
|
| |
| virtual float | GetGradientMagnitudeScale (int) |
| | WARNING: INTERNAL METHOD - NOT INTENDED FOR GENERAL USE. More...
|
| |
| virtual float | GetGradientMagnitudeBias (int) |
| | WARNING: INTERNAL METHOD - NOT INTENDED FOR GENERAL USE. More...
|
| |
| vtkAbstractMapper3D * | NewInstance () const |
| |
| double | GetLength () |
| | Return the diagonal length of this mappers bounding box. More...
|
| |
| virtual int | IsARayCastMapper () |
| | Is this a ray cast mapper? A subclass would return 1 if the ray caster is needed to generate an image from this mapper. More...
|
| |
| virtual int | IsARenderIntoImageMapper () |
| | Is this a "render into image" mapper? A subclass would return 1 if the mapper produces an image by rendering into a software image buffer. More...
|
| |
| void | GetClippingPlaneInDataCoords (vtkMatrix4x4 *propMatrix, int i, double planeEquation[4]) |
| | Get the ith clipping plane as a homogeneous plane equation. More...
|
| |
| int | GetNumberOfClippingPlanes () |
| | Get the number of clipping planes. More...
|
| |
| double * | GetCenter () |
| | Return the Center of this mapper's data. More...
|
| |
| void | GetCenter (double center[3]) |
| | Return the Center of this mapper's data. More...
|
| |
| vtkAbstractMapper * | NewInstance () const |
| |
| virtual vtkMTimeType | GetMTime () |
| | Override Modifiedtime as we have added Clipping planes. More...
|
| |
| void | SetClippingPlanes (vtkPlanes *planes) |
| | An alternative way to set clipping planes: use up to six planes found in the supplied instance of the implicit function vtkPlanes. More...
|
| |
| void | ShallowCopy (vtkAbstractMapper *m) |
| | Make a shallow copy of this mapper. More...
|
| |
| virtual double | GetTimeToDraw () |
| | Get the time required to draw the geometry last time it was rendered. More...
|
| |
| void | AddClippingPlane (vtkPlane *plane) |
| | Specify clipping planes to be applied when the data is mapped (at most 6 clipping planes can be specified). More...
|
| |
| void | RemoveClippingPlane (vtkPlane *plane) |
| | Specify clipping planes to be applied when the data is mapped (at most 6 clipping planes can be specified). More...
|
| |
| void | RemoveAllClippingPlanes () |
| | Specify clipping planes to be applied when the data is mapped (at most 6 clipping planes can be specified). More...
|
| |
| virtual void | SetClippingPlanes (vtkPlaneCollection *) |
| | Get/Set the vtkPlaneCollection which specifies the clipping planes. More...
|
| |
| virtual vtkPlaneCollection * | GetClippingPlanes () |
| | Get/Set the vtkPlaneCollection which specifies the clipping planes. More...
|
| |
| vtkAlgorithm * | NewInstance () const |
| |
| int | HasExecutive () |
| | Check whether this algorithm has an assigned executive. More...
|
| |
| vtkExecutive * | GetExecutive () |
| | Get this algorithm's executive. More...
|
| |
| virtual void | SetExecutive (vtkExecutive *executive) |
| | Set this algorithm's executive. More...
|
| |
| virtual int | ProcessRequest (vtkInformation *request, vtkInformationVector **inInfo, vtkInformationVector *outInfo) |
| | Upstream/Downstream requests form the generalized interface through which executives invoke a algorithm's functionality. More...
|
| |
| int | ProcessRequest (vtkInformation *request, vtkCollection *inInfo, vtkInformationVector *outInfo) |
| | Version of ProcessRequest() that is wrapped. More...
|
| |
| virtual int | ComputePipelineMTime (vtkInformation *request, vtkInformationVector **inInfoVec, vtkInformationVector *outInfoVec, int requestFromOutputPort, vtkMTimeType *mtime) |
| | A special version of ProcessRequest meant specifically for the pipeline modified time request. More...
|
| |
| virtual int | ModifyRequest (vtkInformation *request, int when) |
| | This method gives the algorithm a chance to modify the contents of a request before or after (specified in the when argument) it is forwarded. More...
|
| |
| vtkInformation * | GetInputPortInformation (int port) |
| | Get the information object associated with an input port. More...
|
| |
| vtkInformation * | GetOutputPortInformation (int port) |
| | Get the information object associated with an output port. More...
|
| |
| int | GetNumberOfInputPorts () |
| | Get the number of input ports used by the algorithm. More...
|
| |
| int | GetNumberOfOutputPorts () |
| | Get the number of output ports provided by the algorithm. More...
|
| |
| void | UpdateProgress (double amount) |
| | Update the progress of the process object. More...
|
| |
| virtual void | SetInputArrayToProcess (int idx, int port, int connection, const char *fieldAssociation, const char *attributeTypeorName) |
| | String based versions of SetInputArrayToProcess(). More...
|
| |
| vtkInformation * | GetInputArrayInformation (int idx) |
| | Get the info object for the specified input array to this algorithm. More...
|
| |
| void | RemoveAllInputs () |
| | Remove all the input data. More...
|
| |
| vtkDataObject * | GetOutputDataObject (int port) |
| | Get the data object that will contain the algorithm output for the given port. More...
|
| |
| vtkDataObject * | GetInputDataObject (int port, int connection) |
| | Get the data object that will contain the algorithm input for the given port and given connection. More...
|
| |
| virtual void | RemoveInputConnection (int port, vtkAlgorithmOutput *input) |
| | Remove a connection from the given input port index. More...
|
| |
| virtual void | RemoveInputConnection (int port, int idx) |
| | Remove a connection given by index idx. More...
|
| |
| virtual void | RemoveAllInputConnections (int port) |
| | Removes all input connections. More...
|
| |
| virtual void | SetInputDataObject (int port, vtkDataObject *data) |
| | Sets the data-object as an input on the given port index. More...
|
| |
| virtual void | SetInputDataObject (vtkDataObject *data) |
| |
| virtual void | AddInputDataObject (int port, vtkDataObject *data) |
| | Add the data-object as an input to this given port. More...
|
| |
| virtual void | AddInputDataObject (vtkDataObject *data) |
| |
| vtkAlgorithmOutput * | GetOutputPort (int index) |
| | Get a proxy object corresponding to the given output port of this algorithm. More...
|
| |
| vtkAlgorithmOutput * | GetOutputPort () |
| |
| int | GetNumberOfInputConnections (int port) |
| | Get the number of inputs currently connected to a port. More...
|
| |
| int | GetTotalNumberOfInputConnections () |
| | Get the total number of inputs for this algorithm. More...
|
| |
| vtkAlgorithmOutput * | GetInputConnection (int port, int index) |
| | Get the algorithm output port connected to an input port. More...
|
| |
| vtkAlgorithm * | GetInputAlgorithm (int port, int index, int &algPort) |
| | Returns the algorithm and the output port index of that algorithm connected to a port-index pair. More...
|
| |
| vtkAlgorithm * | GetInputAlgorithm (int port, int index) |
| | Returns the algorithm connected to a port-index pair. More...
|
| |
| vtkAlgorithm * | GetInputAlgorithm () |
| | Equivalent to GetInputAlgorithm(0, 0). More...
|
| |
| vtkExecutive * | GetInputExecutive (int port, int index) |
| | Returns the executive associated with a particular input connection. More...
|
| |
| vtkExecutive * | GetInputExecutive () |
| | Equivalent to GetInputExecutive(0, 0) More...
|
| |
| vtkInformation * | GetInputInformation (int port, int index) |
| | Return the information object that is associated with a particular input connection. More...
|
| |
| vtkInformation * | GetInputInformation () |
| | Equivalent to GetInputInformation(0, 0) More...
|
| |
| vtkInformation * | GetOutputInformation (int port) |
| | Return the information object that is associated with a particular output port. More...
|
| |
| virtual int | Update (int port, vtkInformationVector *requests) |
| | This method enables the passing of data requests to the algorithm to be used during execution (in addition to bringing a particular port up-to-date). More...
|
| |
| virtual int | Update (vtkInformation *requests) |
| | Convenience method to update an algorithm after passing requests to its first output port. More...
|
| |
| virtual int | UpdatePiece (int piece, int numPieces, int ghostLevels, const int extents[6]=0) |
| | Convenience method to update an algorithm after passing requests to its first output port. More...
|
| |
| virtual int | UpdateExtent (const int extents[6]) |
| | Convenience method to update an algorithm after passing requests to its first output port. More...
|
| |
| virtual int | UpdateTimeStep (double time, int piece=-1, int numPieces=1, int ghostLevels=0, const int extents[6]=0) |
| | Convenience method to update an algorithm after passing requests to its first output port. More...
|
| |
| virtual void | UpdateInformation () |
| | Bring the algorithm's information up-to-date. More...
|
| |
| virtual void | UpdateDataObject () |
| | Create output object(s). More...
|
| |
| virtual void | PropagateUpdateExtent () |
| | Propagate meta-data upstream. More...
|
| |
| virtual void | UpdateWholeExtent () |
| | Bring this algorithm's outputs up-to-date. More...
|
| |
| void | ConvertTotalInputToPortConnection (int ind, int &port, int &conn) |
| | Convenience routine to convert from a linear ordering of input connections to a port/connection pair. More...
|
| |
| int | SetUpdateExtentToWholeExtent (int port) |
| | If the whole output extent is required, this method can be called to set the output update extent to the whole extent. More...
|
| |
| int | SetUpdateExtentToWholeExtent () |
| | Convenience function equivalent to SetUpdateExtentToWholeExtent(0) This method assumes that the whole extent is known (that UpdateInformation has been called). More...
|
| |
| void | SetUpdateExtent (int port, int piece, int numPieces, int ghostLevel) |
| | Set the output update extent in terms of piece and ghost levels. More...
|
| |
| void | SetUpdateExtent (int piece, int numPieces, int ghostLevel) |
| | Convenience function equivalent to SetUpdateExtent(0, piece, numPieces, ghostLevel) More...
|
| |
| void | SetUpdateExtent (int port, int extent[6]) |
| | Set the output update extent for data objects that use 3D extents. More...
|
| |
| void | SetUpdateExtent (int extent[6]) |
| | Convenience function equivalent to SetUpdateExtent(0, extent) More...
|
| |
| virtual vtkInformation * | GetInformation () |
| | Set/Get the information object associated with this algorithm. More...
|
| |
| virtual void | SetInformation (vtkInformation *) |
| | Set/Get the information object associated with this algorithm. More...
|
| |
| void | Register (vtkObjectBase *o) override |
| | Participate in garbage collection. More...
|
| |
| void | UnRegister (vtkObjectBase *o) override |
| | Participate in garbage collection. More...
|
| |
| virtual void | SetAbortExecute (int) |
| | Set/Get the AbortExecute flag for the process object. More...
|
| |
| virtual int | GetAbortExecute () |
| | Set/Get the AbortExecute flag for the process object. More...
|
| |
| virtual void | AbortExecuteOn () |
| | Set/Get the AbortExecute flag for the process object. More...
|
| |
| virtual void | AbortExecuteOff () |
| | Set/Get the AbortExecute flag for the process object. More...
|
| |
| virtual void | SetProgress (double) |
| | Set/Get the execution progress of a process object. More...
|
| |
| virtual double | GetProgress () |
| | Set/Get the execution progress of a process object. More...
|
| |
| void | SetProgressText (const char *ptext) |
| | Set the current text message associated with the progress state. More...
|
| |
| virtual char * | GetProgressText () |
| | Set the current text message associated with the progress state. More...
|
| |
| virtual unsigned long | GetErrorCode () |
| | The error code contains a possible error that occurred while reading or writing the file. More...
|
| |
| virtual void | SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, const char *name) |
| | Set the input data arrays that this algorithm will process. More...
|
| |
| virtual void | SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, int fieldAttributeType) |
| | Set the input data arrays that this algorithm will process. More...
|
| |
| virtual void | SetInputArrayToProcess (int idx, vtkInformation *info) |
| | Set the input data arrays that this algorithm will process. More...
|
| |
| virtual void | SetInputConnection (int port, vtkAlgorithmOutput *input) |
| | Set the connection for the given input port index. More...
|
| |
| virtual void | SetInputConnection (vtkAlgorithmOutput *input) |
| | Set the connection for the given input port index. More...
|
| |
| virtual void | AddInputConnection (int port, vtkAlgorithmOutput *input) |
| | Add a connection to the given input port index. More...
|
| |
| virtual void | AddInputConnection (vtkAlgorithmOutput *input) |
| | Add a connection to the given input port index. More...
|
| |
| virtual void | Update (int port) |
| | Bring this algorithm's outputs up-to-date. More...
|
| |
| virtual void | Update () |
| | Bring this algorithm's outputs up-to-date. More...
|
| |
| virtual void | SetReleaseDataFlag (int) |
| | Turn release data flag on or off for all output ports. More...
|
| |
| virtual int | GetReleaseDataFlag () |
| | Turn release data flag on or off for all output ports. More...
|
| |
| void | ReleaseDataFlagOn () |
| | Turn release data flag on or off for all output ports. More...
|
| |
| void | ReleaseDataFlagOff () |
| | Turn release data flag on or off for all output ports. More...
|
| |
| int | UpdateExtentIsEmpty (vtkInformation *pinfo, vtkDataObject *output) |
| | This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. More...
|
| |
| int | UpdateExtentIsEmpty (vtkInformation *pinfo, int extentType) |
| | This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. More...
|
| |
| int * | GetUpdateExtent () |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| int * | GetUpdateExtent (int port) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| void | GetUpdateExtent (int &x0, int &x1, int &y0, int &y1, int &z0, int &z1) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| void | GetUpdateExtent (int port, int &x0, int &x1, int &y0, int &y1, int &z0, int &z1) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| void | GetUpdateExtent (int extent[6]) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| void | GetUpdateExtent (int port, int extent[6]) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| int | GetUpdatePiece () |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdatePiece (int port) |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdateNumberOfPieces () |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdateNumberOfPieces (int port) |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdateGhostLevel () |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdateGhostLevel (int port) |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| void | SetProgressObserver (vtkProgressObserver *) |
| | If an ProgressObserver is set, the algorithm will report progress through it rather than directly. More...
|
| |
| virtual vtkProgressObserver * | GetProgressObserver () |
| | If an ProgressObserver is set, the algorithm will report progress through it rather than directly. More...
|
| |
| | vtkBaseTypeMacro (vtkObject, vtkObjectBase) |
| |
| virtual void | DebugOn () |
| | Turn debugging output on. More...
|
| |
| virtual void | DebugOff () |
| | Turn debugging output off. More...
|
| |
| bool | GetDebug () |
| | Get the value of the debug flag. More...
|
| |
| void | SetDebug (bool debugFlag) |
| | Set the value of the debug flag. More...
|
| |
| virtual void | Modified () |
| | Update the modification time for this object. More...
|
| |
| void | RemoveObserver (unsigned long tag) |
| |
| void | RemoveObservers (unsigned long event) |
| |
| void | RemoveObservers (const char *event) |
| |
| void | RemoveAllObservers () |
| |
| int | HasObserver (unsigned long event) |
| |
| int | HasObserver (const char *event) |
| |
| int | InvokeEvent (unsigned long event) |
| |
| int | InvokeEvent (const char *event) |
| |
| unsigned long | AddObserver (unsigned long event, vtkCommand *, float priority=0.0f) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| unsigned long | AddObserver (const char *event, vtkCommand *, float priority=0.0f) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| vtkCommand * | GetCommand (unsigned long tag) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| void | RemoveObserver (vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| void | RemoveObservers (unsigned long event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| void | RemoveObservers (const char *event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| int | HasObserver (unsigned long event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| int | HasObserver (const char *event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| template<class U , class T > |
| unsigned long | AddObserver (unsigned long event, U observer, void(T::*callback)(), float priority=0.0f) |
| | Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...
|
| |
| template<class U , class T > |
| unsigned long | AddObserver (unsigned long event, U observer, void(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f) |
| | Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...
|
| |
| template<class U , class T > |
| unsigned long | AddObserver (unsigned long event, U observer, bool(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f) |
| | Allow user to set the AbortFlagOn() with the return value of the callback method. More...
|
| |
| int | InvokeEvent (unsigned long event, void *callData) |
| | This method invokes an event and return whether the event was aborted or not. More...
|
| |
| int | InvokeEvent (const char *event, void *callData) |
| | This method invokes an event and return whether the event was aborted or not. More...
|
| |
| const char * | GetClassName () const |
| | Return the class name as a string. More...
|
| |
| virtual void | Delete () |
| | Delete a VTK object. More...
|
| |
| virtual void | FastDelete () |
| | Delete a reference to this object. More...
|
| |
| void | InitializeObjectBase () |
| |
| void | Print (ostream &os) |
| | Print an object to an ostream. More...
|
| |
| int | GetReferenceCount () |
| | Return the current reference count of this object. More...
|
| |
| void | SetReferenceCount (int) |
| | Sets the reference count. More...
|
| |
| void | PrintRevisions (ostream &) |
| | Legacy. More...
|
| |
| virtual void | PrintHeader (ostream &os, vtkIndent indent) |
| | Methods invoked by print to print information about the object including superclasses. More...
|
| |
| virtual void | PrintTrailer (ostream &os, vtkIndent indent) |
| | Methods invoked by print to print information about the object including superclasses. More...
|
| |
|
| virtual vtkObjectBase * | NewInstanceInternal () const |
| |
| | vtkHAVSVolumeMapper () |
| |
| | ~vtkHAVSVolumeMapper () |
| |
| virtual void | Initialize (vtkRenderer *ren, vtkVolume *vol)=0 |
| |
| void | InitializePrimitives (vtkVolume *vol) |
| |
| void | InitializeScalars () |
| |
| void | InitializeLevelOfDetail () |
| |
| void | InitializeLookupTables (vtkVolume *vol) |
| |
| void | FRadixSort (vtkHAVSSortedFace *array, vtkHAVSSortedFace *temp, int lo, int up) |
| |
| void | FRadix (int byte, int len, vtkHAVSSortedFace *source, vtkHAVSSortedFace *dest, int *count) |
| |
| void | UpdateLevelOfDetail (float targetTime) |
| |
| void | PartialVisibilitySort (float *eye) |
| |
| bool | CheckInitializationError () |
| |
| | vtkUnstructuredGridVolumeMapper () |
| |
| | ~vtkUnstructuredGridVolumeMapper () |
| |
| virtual int | FillInputPortInformation (int, vtkInformation *) |
| | Fill the input port information objects for this algorithm. More...
|
| |
| | vtkAbstractVolumeMapper () |
| |
| | ~vtkAbstractVolumeMapper () |
| |
| | vtkAbstractMapper3D () |
| |
| | ~vtkAbstractMapper3D () |
| |
| | vtkAbstractMapper () |
| |
| | ~vtkAbstractMapper () |
| |
| | vtkAlgorithm () |
| |
| | ~vtkAlgorithm () override |
| |
| virtual int | FillOutputPortInformation (int port, vtkInformation *info) |
| | Fill the output port information objects for this algorithm. More...
|
| |
| virtual void | SetNumberOfInputPorts (int n) |
| | Set the number of input ports used by the algorithm. More...
|
| |
| virtual void | SetNumberOfOutputPorts (int n) |
| | Set the number of output ports provided by the algorithm. More...
|
| |
| int | InputPortIndexInRange (int index, const char *action) |
| |
| int | OutputPortIndexInRange (int index, const char *action) |
| |
| int | GetInputArrayAssociation (int idx, vtkInformationVector **inputVector) |
| | Get the assocition of the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
|
| |
| vtkInformation * | GetInputArrayFieldInformation (int idx, vtkInformationVector **inputVector) |
| | This method takes in an index (as specified in SetInputArrayToProcess) and a pipeline information vector. More...
|
| |
| virtual vtkExecutive * | CreateDefaultExecutive () |
| | Create a default executive. More...
|
| |
| void | ReportReferences (vtkGarbageCollector *) override |
| |
| virtual void | SetNthInputConnection (int port, int index, vtkAlgorithmOutput *input) |
| | Replace the Nth connection on the given input port. More...
|
| |
| virtual void | SetNumberOfInputConnections (int port, int n) |
| | Set the number of input connections on the given input port. More...
|
| |
| void | SetInputDataInternal (int port, vtkDataObject *input) |
| | These methods are used by subclasses to implement methods to set data objects directly as input. More...
|
| |
| void | AddInputDataInternal (int port, vtkDataObject *input) |
| |
| int | GetInputArrayAssociation (int idx, int connection, vtkInformationVector **inputVector) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| int | GetInputArrayAssociation (int idx, vtkDataObject *input) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, vtkInformationVector **inputVector) |
| | Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, vtkInformationVector **inputVector, int &association) |
| | Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, vtkDataObject *input) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, vtkDataObject *input, int &association) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector) |
| | Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector, int &association) |
| | Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkDataObject *input) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkDataObject *input, int &association) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| virtual void | SetErrorCode (unsigned long) |
| | The error code contains a possible error that occurred while reading or writing the file. More...
|
| |
| | vtkObject () |
| |
| | ~vtkObject () override |
| |
| void | RegisterInternal (vtkObjectBase *, vtkTypeBool check) override |
| |
| void | UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) override |
| |
| void | InternalGrabFocus (vtkCommand *mouseEvents, vtkCommand *keypressEvents=NULL) |
| | These methods allow a command to exclusively grab all events. More...
|
| |
| void | InternalReleaseFocus () |
| | These methods allow a command to exclusively grab all events. More...
|
| |
| | vtkObjectBase () |
| |
| virtual | ~vtkObjectBase () |
| |
| virtual void | CollectRevisions (ostream &) |
| |
| | vtkObjectBase (const vtkObjectBase &) |
| |
| void | operator= (const vtkObjectBase &) |
| |
Public Types inherited from vtkUnstructuredGridVolumeMapper