abstract superclass for arrays of numeric data More...
#include <vtkDataArray.h>
Public Types | |
| typedef vtkAbstractArray | Superclass |
 Public Types inherited from vtkAbstractArray | |
| enum | { MAX_DISCRETE_VALUES = 32 } |
| enum | { AbstractArray = 0, DataArray, TypedDataArray, DataArrayTemplate, MappedDataArray } |
| typedef vtkObject | Superclass |
| Public Types inherited from vtkObject | |
| typedef vtkObjectBase | Superclass |
Public Member Functions | |
| virtual int | IsA (const char *type) |
| vtkDataArray * | NewInstance () const |
| void | PrintSelf (ostream &os, vtkIndent indent) |
| virtual void | SetTuple (vtkIdType i, vtkIdType j, vtkAbstractArray *source)=0 |
| virtual void | InsertTuple (vtkIdType i, vtkIdType j, vtkAbstractArray *source)=0 |
| virtual vtkIdType | InsertNextTuple (vtkIdType j, vtkAbstractArray *source)=0 |
| virtual void | GetTuples (vtkIdList *ptIds, vtkAbstractArray *output) |
| virtual void | GetTuples (vtkIdType p1, vtkIdType p2, vtkAbstractArray *output) |
| virtual double * | GetTuple (vtkIdType i)=0 |
| virtual void | GetTuple (vtkIdType i, double *tuple)=0 |
| virtual double | GetComponent (vtkIdType i, int j) |
| virtual void | SetComponent (vtkIdType i, int j, double c) |
| virtual void | InsertComponent (vtkIdType i, int j, double c) |
| virtual void | FillComponent (int j, double c) |
| virtual void * | WriteVoidPointer (vtkIdType id, vtkIdType number)=0 |
| virtual unsigned long | GetActualMemorySize () |
| void | CreateDefaultLookupTable () |
| virtual double | GetMaxNorm () |
| virtual int | CopyInformation (vtkInformation *infoFrom, int deep=1) |
| virtual int | GetArrayType () |
| virtual int | IsNumeric () |
| virtual int | GetElementComponentSize () |
| virtual void | InterpolateTuple (vtkIdType i, vtkIdList *ptIndices, vtkAbstractArray *source, double *weights) |
| virtual void | InterpolateTuple (vtkIdType i, vtkIdType id1, vtkAbstractArray *source1, vtkIdType id2, vtkAbstractArray *source2, double t) |
| double | GetTuple1 (vtkIdType i) |
| double * | GetTuple2 (vtkIdType i) |
| double * | GetTuple3 (vtkIdType i) |
| double * | GetTuple4 (vtkIdType i) |
| double * | GetTuple6 (vtkIdType i) |
| double * | GetTuple9 (vtkIdType i) |
| virtual void | SetTuple (vtkIdType i, const float *tuple)=0 |
| virtual void | SetTuple (vtkIdType i, const double *tuple)=0 |
| void | SetTuple1 (vtkIdType i, double value) |
| void | SetTuple2 (vtkIdType i, double val0, double val1) |
| void | SetTuple3 (vtkIdType i, double val0, double val1, double val2) |
| void | SetTuple4 (vtkIdType i, double val0, double val1, double val2, double val3) |
| void | SetTuple6 (vtkIdType i, double val0, double val1, double val2, double val3, double val4, double val5) |
| void | SetTuple9 (vtkIdType i, double val0, double val1, double val2, double val3, double val4, double val5, double val6, double val7, double val8) |
| virtual void | InsertTuple (vtkIdType i, const float *tuple)=0 |
| virtual void | InsertTuple (vtkIdType i, const double *tuple)=0 |
| void | InsertTuple1 (vtkIdType i, double value) |
| void | InsertTuple2 (vtkIdType i, double val0, double val1) |
| void | InsertTuple3 (vtkIdType i, double val0, double val1, double val2) |
| void | InsertTuple4 (vtkIdType i, double val0, double val1, double val2, double val3) |
| void | InsertTuple9 (vtkIdType i, double val0, double val1, double val2, double val3, double val4, double val5, double val6, double val7, double val8) |
| virtual vtkIdType | InsertNextTuple (const float *tuple)=0 |
| virtual vtkIdType | InsertNextTuple (const double *tuple)=0 |
| void | InsertNextTuple1 (double value) |
| void | InsertNextTuple2 (double val0, double val1) |
| void | InsertNextTuple3 (double val0, double val1, double val2) |
| void | InsertNextTuple4 (double val0, double val1, double val2, double val3) |
| void | InsertNextTuple9 (double val0, double val1, double val2, double val3, double val4, double val5, double val6, double val7, double val8) |
| virtual void | RemoveTuple (vtkIdType id)=0 |
| virtual void | RemoveFirstTuple ()=0 |
| virtual void | RemoveLastTuple ()=0 |
| virtual void | GetData (vtkIdType tupleMin, vtkIdType tupleMax, int compMin, int compMax, vtkDoubleArray *data) |
| virtual void | DeepCopy (vtkAbstractArray *aa) |
| virtual void | DeepCopy (vtkDataArray *da) |
| virtual void | CopyComponent (int j, vtkDataArray *from, int fromComponent) |
| void | SetLookupTable (vtkLookupTable *lut) |
| virtual vtkLookupTable * | GetLookupTable () |
| void | GetRange (double range[2], int comp) |
| double * | GetRange (int comp) |
| double * | GetRange () |
| void | GetRange (double range[2]) |
| Public Member Functions inherited from vtkAbstractArray | |
| vtkAbstractArray * | NewInstance () const |
| virtual int | Allocate (vtkIdType sz, vtkIdType ext=1000)=0 |
| virtual void | Initialize ()=0 |
| virtual int | GetDataType ()=0 |
| void | SetComponentName (vtkIdType component, const char *name) |
| const char * | GetComponentName (vtkIdType component) |
| bool | HasAComponentName () |
| int | CopyComponentNames (vtkAbstractArray *da) |
| virtual void | SetNumberOfTuples (vtkIdType number)=0 |
| virtual bool | HasStandardMemoryLayout () |
| virtual void * | GetVoidPointer (vtkIdType id)=0 |
| virtual void | Squeeze ()=0 |
| virtual int | Resize (vtkIdType numTuples)=0 |
| virtual void | ExportToVoidPointer (void *vtkNotUsed(out_ptr)) |
| virtual vtkArrayIterator * | NewIterator ()=0 |
| virtual vtkVariant | GetVariantValue (vtkIdType idx) |
| virtual void | InsertVariantValue (vtkIdType idx, vtkVariant value) |
| virtual void | SetVariantValue (vtkIdType idx, vtkVariant value)=0 |
| virtual void | DataChanged ()=0 |
| virtual void | ClearLookup ()=0 |
| vtkInformation * | GetInformation () |
| virtual void | SetNumberOfComponents (int) |
| int | GetNumberOfComponents () |
| vtkIdType | GetNumberOfTuples () |
| virtual void | InsertTuples (vtkIdList *dstIds, vtkIdList *srcIds, vtkAbstractArray *source)=0 |
| virtual void | InsertTuples (vtkIdType dstStart, vtkIdType n, vtkIdType srcStart, vtkAbstractArray *source)=0 |
| void | Reset () |
| vtkIdType | GetSize () |
| vtkIdType | GetMaxId () |
| virtual void | SetVoidArray (void *vtkNotUsed(array), vtkIdType vtkNotUsed(size), int vtkNotUsed(save))=0 |
| virtual void | SetName (const char *) |
| virtual char * | GetName () |
| virtual const char * | GetDataTypeAsString (void) |
| virtual vtkIdType | GetDataSize () |
| virtual vtkIdType | LookupValue (vtkVariant value)=0 |
| virtual void | LookupValue (vtkVariant value, vtkIdList *ids)=0 |
| virtual void | GetProminentComponentValues (int comp, vtkVariantArray *values, double uncertainty=1.e-6, double minimumProminence=1.e-3) |
| bool | HasInformation () |
| virtual unsigned int | GetMaxDiscreteValues () |
| virtual void | SetMaxDiscreteValues (unsigned int) |
| virtual int | GetDataTypeSize ()=0 |
| Public Member Functions inherited from vtkObject | |
| vtkObject * | NewInstance () const |
| virtual void | DebugOn () |
| virtual void | DebugOff () |
| bool | GetDebug () |
| void | SetDebug (bool debugFlag) |
| virtual void | Modified () |
| virtual unsigned long | GetMTime () |
| unsigned long | AddObserver (unsigned long event, vtkCommand *, float priority=0.0f) |
| unsigned long | AddObserver (const char *event, vtkCommand *, float priority=0.0f) |
| vtkCommand * | GetCommand (unsigned long tag) |
| void | RemoveObserver (vtkCommand *) |
| void | RemoveObservers (unsigned long event, vtkCommand *) |
| void | RemoveObservers (const char *event, vtkCommand *) |
| int | HasObserver (unsigned long event, vtkCommand *) |
| int | HasObserver (const char *event, vtkCommand *) |
| void | RemoveObserver (unsigned long tag) |
| void | RemoveObservers (unsigned long event) |
| void | RemoveObservers (const char *event) |
| void | RemoveAllObservers () |
| int | HasObserver (unsigned long event) |
| int | HasObserver (const char *event) |
| template<class U , class T > | |
| unsigned long | AddObserver (unsigned long event, U observer, void(T::*callback)(), float priority=0.0f) |
| template<class U , class T > | |
| unsigned long | AddObserver (unsigned long event, U observer, void(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f) |
| template<class U , class T > | |
| unsigned long | AddObserver (unsigned long event, U observer, bool(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f) |
| int | InvokeEvent (unsigned long event, void *callData) |
| int | InvokeEvent (const char *event, void *callData) |
| int | InvokeEvent (unsigned long event) |
| int | InvokeEvent (const char *event) |
| Public Member Functions inherited from vtkObjectBase | |
| const char * | GetClassName () const |
| virtual void | Delete () |
| virtual void | FastDelete () |
| void | Print (ostream &os) |
| virtual void | Register (vtkObjectBase *o) |
| virtual void | UnRegister (vtkObjectBase *o) |
| void | SetReferenceCount (int) |
| void | PrintRevisions (ostream &) |
| virtual void | PrintHeader (ostream &os, vtkIndent indent) |
| virtual void | PrintTrailer (ostream &os, vtkIndent indent) |
| int | GetReferenceCount () |
Protected Member Functions | |
| virtual vtkObjectBase * | NewInstanceInternal () const |
| virtual void | ComputeRange (double range[2], int comp) |
| virtual bool | ComputeScalarRange (double *ranges) |
| virtual bool | ComputeVectorRange (double range[2]) |
| vtkDataArray () | |
| ~vtkDataArray () | |
| Protected Member Functions inherited from vtkAbstractArray | |
| vtkAbstractArray () | |
| ~vtkAbstractArray () | |
| virtual void | SetInformation (vtkInformation *) |
| virtual void | UpdateDiscreteValueSet (double uncertainty, double minProminence) |
| Protected Member Functions inherited from vtkObject | |
| vtkObject () | |
| virtual | ~vtkObject () |
| virtual void | RegisterInternal (vtkObjectBase *, int check) |
| virtual void | UnRegisterInternal (vtkObjectBase *, int check) |
| void | InternalGrabFocus (vtkCommand *mouseEvents, vtkCommand *keypressEvents=NULL) |
| void | InternalReleaseFocus () |
| Protected Member Functions inherited from vtkObjectBase | |
| vtkObjectBase () | |
| virtual | ~vtkObjectBase () |
| virtual void | CollectRevisions (ostream &) |
| virtual void | ReportReferences (vtkGarbageCollector *) |
| vtkObjectBase (const vtkObjectBase &) | |
| void | operator= (const vtkObjectBase &) |
Protected Attributes | |
| vtkLookupTable * | LookupTable |
| double | Range [2] |
| Protected Attributes inherited from vtkAbstractArray | |
| vtkIdType | Size |
| vtkIdType | MaxId |
| int | NumberOfComponents |
| unsigned int | MaxDiscreteValues |
| char * | Name |
| bool | RebuildArray |
| vtkInformation * | Information |
| vtkInternalComponentNames * | ComponentNames |
| Protected Attributes inherited from vtkObject | |
| bool | Debug |
| vtkTimeStamp | MTime |
| vtkSubjectHelper * | SubjectHelper |
| Protected Attributes inherited from vtkObjectBase | |
| vtkAtomicInt32 | ReferenceCount |
| vtkWeakPointerBase ** | WeakPointers |
Friends | |
| class | vtkPoints |
| static void | GetDataTypeRange (int type, double range[2]) |
| static double | GetDataTypeMin (int type) |
| static double | GetDataTypeMax (int type) |
| void | GetDataTypeRange (double range[2]) |
| double | GetDataTypeMin () |
| double | GetDataTypeMax () |
Detailed Description
abstract superclass for arrays of numeric data
vtkDataArray is an abstract superclass for data array objects containing numeric data. It extends the API defined in vtkAbstractArray. vtkDataArray is an abstract superclass for data array objects. This class defines an API that all array objects must support. Note that the concrete subclasses of this class represent data in native form (char, int, etc.) and often have specialized more efficient methods for operating on this data (for example, getting pointers to data or getting/inserting data in native form). Subclasses of vtkDataArray are assumed to contain data whose components are meaningful when cast to and from double.
- See also
- vtkBitArray vtkCharArray vtkUnsignedCharArray vtkShortArray vtkUnsignedShortArray vtkIntArray vtkUnsignedIntArray vtkLongArray vtkUnsignedLongArray vtkDoubleArray vtkDoubleArray
- Examples:
- vtkDataArray (Examples)
- Tests:
- vtkDataArray (Tests)
Definition at line 54 of file vtkDataArray.h.
Member Typedef Documentation
Definition at line 57 of file vtkDataArray.h.
Constructor & Destructor Documentation
|
protected |
|
protected |
Member Function Documentation
|
static |
|
virtual |
Return 1 if this class is the same type of (or a subclass of) the named class. Returns 0 otherwise. This method works in combination with vtkTypeMacro found in vtkSetGet.h.
Reimplemented from vtkAbstractArray.
Reimplemented in vtkTypeTemplate< vtkDataArrayTemplate< Scalar >, vtkTypedDataArray< Scalar > >, vtkTypeTemplate< vtkCPExodusIIResultsArrayTemplate< Scalar >, vtkMappedDataArray< Scalar > >, vtkTypeTemplate< vtkCPExodusIINodalCoordinatesTemplate< Scalar >, vtkMappedDataArray< Scalar > >, vtkTypeTemplate< vtkDataArrayTemplate< T >, vtkTypedDataArray< T > >, vtkTypeTemplate< vtkTypedDataArray< T >, vtkDataArray >, vtkTypeTemplate< vtkPeriodicDataArray< Scalar >, vtkMappedDataArray< Scalar > >, vtkTypeTemplate< vtkMappedDataArray< Scalar >, vtkTypedDataArray< Scalar > >, vtkTypeTemplate< vtkTypedDataArray< Scalar >, vtkDataArray >, vtkIntArray, vtkUnsignedLongArray, vtkLongArray, vtkShortArray, vtkUnsignedIntArray, vtkUnsignedShortArray, vtkDoubleArray, vtkFloatArray, vtkIdTypeArray, vtkUnsigned__Int64Array, vtkUnsignedCharArray, vtk__Int64Array, vtkLongLongArray, vtkUnsignedLongLongArray, vtkCharArray, vtkSignedCharArray, vtkTypeInt64Array, vtkTypeUInt64Array, vtkBitArray, vtkTypeFloat32Array, vtkTypeFloat64Array, vtkTypeInt16Array, vtkTypeInt32Array, vtkTypeInt8Array, vtkTypeUInt16Array, vtkTypeUInt32Array, and vtkTypeUInt8Array.
|
static |
|
protectedvirtual |
Reimplemented from vtkAbstractArray.
Reimplemented in vtkTypeTemplate< vtkDataArrayTemplate< Scalar >, vtkTypedDataArray< Scalar > >, vtkTypeTemplate< vtkCPExodusIIResultsArrayTemplate< Scalar >, vtkMappedDataArray< Scalar > >, vtkTypeTemplate< vtkCPExodusIINodalCoordinatesTemplate< Scalar >, vtkMappedDataArray< Scalar > >, vtkTypeTemplate< vtkDataArrayTemplate< T >, vtkTypedDataArray< T > >, vtkTypeTemplate< vtkTypedDataArray< T >, vtkDataArray >, vtkTypeTemplate< vtkPeriodicDataArray< Scalar >, vtkMappedDataArray< Scalar > >, vtkTypeTemplate< vtkMappedDataArray< Scalar >, vtkTypedDataArray< Scalar > >, vtkTypeTemplate< vtkTypedDataArray< Scalar >, vtkDataArray >, vtkIntArray, vtkUnsignedLongArray, vtkLongArray, vtkShortArray, vtkUnsignedIntArray, vtkUnsignedShortArray, vtkDoubleArray, vtkFloatArray, vtkIdTypeArray, vtkUnsigned__Int64Array, vtkUnsignedCharArray, vtk__Int64Array, vtkLongLongArray, vtkUnsignedLongLongArray, vtkCharArray, vtkSignedCharArray, vtkTypeInt64Array, vtkTypeUInt64Array, vtkBitArray, vtkTypeFloat32Array, vtkTypeFloat64Array, vtkTypeInt16Array, vtkTypeInt32Array, vtkTypeInt8Array, vtkTypeUInt16Array, vtkTypeUInt32Array, and vtkTypeUInt8Array.
| vtkDataArray* vtkDataArray::NewInstance | ( | ) | const |
|
virtual |
Methods invoked by print to print information about the object including superclasses. Typically not called by the user (use Print() instead) but used in the hierarchical print process to combine the output of several classes.
Reimplemented from vtkAbstractArray.
Reimplemented in vtkIntArray, vtkMappedDataArray< Scalar >, vtkUnsignedLongArray, vtkLongArray, vtkShortArray, vtkUnsignedIntArray, vtkUnsignedShortArray, vtkDoubleArray, vtkFloatArray, vtkIdTypeArray, vtkUnsigned__Int64Array, vtkUnsignedCharArray, vtkLongLongArray, vtkUnsignedLongLongArray, vtkSignedCharArray, vtkCPExodusIIResultsArrayTemplate< Scalar >, vtkCPExodusIINodalCoordinatesTemplate< Scalar >, vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, vtkTypeInt64Array, vtkTypeUInt64Array, vtkPeriodicDataArray< Scalar >, vtkTypeFloat32Array, vtkTypeFloat64Array, vtkTypeInt16Array, vtkTypeInt32Array, vtkTypeInt8Array, vtkTypeUInt16Array, vtkTypeUInt32Array, and vtkTypeUInt8Array.
|
inlinestatic |
Perform a fast, safe cast from a vtkAbstractArray to a vtkDataArray. This method checks if source->GetArrayType() returns DataArrayFastCast or a more derived type, and performs a static_cast to return source as a vtkDataArray pointer. Otherwise, NULL is returned.
Definition at line 441 of file vtkDataArray.h.
|
inlinevirtual |
This method is here to make backward compatibility easier. It must return true if and only if an array contains numeric data. All vtkDataArray subclasses contain numeric data, hence this method always returns 1(true).
Implements vtkAbstractArray.
Definition at line 72 of file vtkDataArray.h.
|
inlinevirtual |
Return the size, in bytes, of the lowest-level element of an array. For vtkDataArray and subclasses this is the size of the data type.
Implements vtkAbstractArray.
Definition at line 79 of file vtkDataArray.h.
|
pure virtual |
Set the tuple at the ith location using the jth tuple in the source array. This method assumes that the two arrays have the same type and structure. Note that range checking and memory allocation is not performed; use in conjunction with SetNumberOfTuples() to allocate space.
Implements vtkAbstractArray.
Implemented in vtkPeriodicDataArray< Scalar >, vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, vtkCPExodusIIResultsArrayTemplate< Scalar >, vtkCPExodusIINodalCoordinatesTemplate< Scalar >, and vtkBitArray.
|
pure virtual |
Insert the jth tuple in the source array, at ith location in this array. Note that memory allocation is performed as necessary to hold the data. This pure virtual function is redeclared here to avoid declaration hidden warnings.
Implements vtkAbstractArray.
Implemented in vtkPeriodicDataArray< Scalar >, vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, vtkCPExodusIIResultsArrayTemplate< Scalar >, vtkCPExodusIINodalCoordinatesTemplate< Scalar >, and vtkBitArray.
|
pure virtual |
Insert the jth tuple in the source array, at the end in this array. Note that memory allocation is performed as necessary to hold the data. Returns the location at which the data was inserted. This pure virtual function is redeclared here to avoid declaration hidden warnings.
Implements vtkAbstractArray.
Implemented in vtkPeriodicDataArray< Scalar >, vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, vtkCPExodusIIResultsArrayTemplate< Scalar >, vtkBitArray, and vtkCPExodusIINodalCoordinatesTemplate< Scalar >.
|
virtual |
Given a list of point ids, return an array of tuples. You must insure that the output array has been previously allocated with enough space to hold the data.
Reimplemented from vtkAbstractArray.
Reimplemented in vtkMappedDataArray< Scalar >, vtkCPExodusIIResultsArrayTemplate< Scalar >, vtkCPExodusIINodalCoordinatesTemplate< Scalar >, and vtkPeriodicDataArray< Scalar >.
|
virtual |
Get the tuples for the range of points ids specified (i.e., p1->p2 inclusive). You must insure that the output array has been previously allocated with enough space to hold the data.
Reimplemented from vtkAbstractArray.
Reimplemented in vtkMappedDataArray< Scalar >, vtkCPExodusIIResultsArrayTemplate< Scalar >, vtkCPExodusIINodalCoordinatesTemplate< Scalar >, and vtkPeriodicDataArray< Scalar >.
|
virtual |
Set the ith tuple in this array as the interpolated tuple value, given the ptIndices in the source array and associated interpolation weights. This method assumes that the two arrays are of the same type and strcuture.
Implements vtkAbstractArray.
Reimplemented in vtkPeriodicDataArray< Scalar >, vtkCPExodusIIResultsArrayTemplate< Scalar >, vtkCPExodusIINodalCoordinatesTemplate< Scalar >, and vtkMappedDataArray< Scalar >.
|
virtual |
Insert the ith tuple in this array as interpolated from the two values, p1 and p2, and an interpolation factor, t. The interpolation factor ranges from (0,1), with t=0 located at p1. This method assumes that the three arrays are of the same type. p1 is value at index id1 in source1, while, p2 is value at index id2 in source2.
Implements vtkAbstractArray.
Reimplemented in vtkPeriodicDataArray< Scalar >, vtkCPExodusIIResultsArrayTemplate< Scalar >, vtkCPExodusIINodalCoordinatesTemplate< Scalar >, and vtkMappedDataArray< Scalar >.
Get the data tuple at ith location. Return it as a pointer to an array. Note: this method is not thread-safe, and the pointer is only valid as long as another method invocation to a vtk object is not performed.
Implemented in vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, vtkBitArray, vtkPeriodicDataArray< Scalar >, vtkCPExodusIIResultsArrayTemplate< Scalar >, and vtkCPExodusIINodalCoordinatesTemplate< Scalar >.
Get the data tuple at ith location by filling in a user-provided array, Make sure that your array is large enough to hold the NumberOfComponents amount of data being returned.
Implemented in vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, vtkBitArray, vtkPeriodicDataArray< Scalar >, vtkCPExodusIIResultsArrayTemplate< Scalar >, and vtkCPExodusIINodalCoordinatesTemplate< Scalar >.
These methods are included as convenience for the wrappers. GetTuple() and SetTuple() which return/take arrays can not be used from wrapped languages. These methods can be used instead.
These methods are included as convenience for the wrappers. GetTuple() and SetTuple() which return/take arrays can not be used from wrapped languages. These methods can be used instead.
These methods are included as convenience for the wrappers. GetTuple() and SetTuple() which return/take arrays can not be used from wrapped languages. These methods can be used instead.
These methods are included as convenience for the wrappers. GetTuple() and SetTuple() which return/take arrays can not be used from wrapped languages. These methods can be used instead.
These methods are included as convenience for the wrappers. GetTuple() and SetTuple() which return/take arrays can not be used from wrapped languages. These methods can be used instead.
These methods are included as convenience for the wrappers. GetTuple() and SetTuple() which return/take arrays can not be used from wrapped languages. These methods can be used instead.
Set the data tuple at ith location. Note that range checking or memory allocation is not performed; use this method in conjunction with SetNumberOfTuples() to allocate space.
Implemented in vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, vtkPeriodicDataArray< Scalar >, vtkBitArray, vtkCPExodusIIResultsArrayTemplate< Scalar >, and vtkCPExodusIINodalCoordinatesTemplate< Scalar >.
Set the data tuple at ith location. Note that range checking or memory allocation is not performed; use this method in conjunction with SetNumberOfTuples() to allocate space.
Implemented in vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, vtkPeriodicDataArray< Scalar >, vtkBitArray, vtkCPExodusIIResultsArrayTemplate< Scalar >, and vtkCPExodusIINodalCoordinatesTemplate< Scalar >.
These methods are included as convenience for the wrappers. GetTuple() and SetTuple() which return/take arrays can not be used from wrapped languages. These methods can be used instead.
These methods are included as convenience for the wrappers. GetTuple() and SetTuple() which return/take arrays can not be used from wrapped languages. These methods can be used instead.
These methods are included as convenience for the wrappers. GetTuple() and SetTuple() which return/take arrays can not be used from wrapped languages. These methods can be used instead.
These methods are included as convenience for the wrappers. GetTuple() and SetTuple() which return/take arrays can not be used from wrapped languages. These methods can be used instead.
| void vtkDataArray::SetTuple6 | ( | vtkIdType | i, |
| double | val0, | ||
| double | val1, | ||
| double | val2, | ||
| double | val3, | ||
| double | val4, | ||
| double | val5 | ||
| ) |
These methods are included as convenience for the wrappers. GetTuple() and SetTuple() which return/take arrays can not be used from wrapped languages. These methods can be used instead.
| void vtkDataArray::SetTuple9 | ( | vtkIdType | i, |
| double | val0, | ||
| double | val1, | ||
| double | val2, | ||
| double | val3, | ||
| double | val4, | ||
| double | val5, | ||
| double | val6, | ||
| double | val7, | ||
| double | val8 | ||
| ) |
These methods are included as convenience for the wrappers. GetTuple() and SetTuple() which return/take arrays can not be used from wrapped languages. These methods can be used instead.
Insert the data tuple at ith location. Note that memory allocation is performed as necessary to hold the data.
Implemented in vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, vtkPeriodicDataArray< Scalar >, vtkBitArray, vtkCPExodusIIResultsArrayTemplate< Scalar >, and vtkCPExodusIINodalCoordinatesTemplate< Scalar >.
Insert the data tuple at ith location. Note that memory allocation is performed as necessary to hold the data.
Implemented in vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, vtkPeriodicDataArray< Scalar >, vtkBitArray, vtkCPExodusIIResultsArrayTemplate< Scalar >, and vtkCPExodusIINodalCoordinatesTemplate< Scalar >.
These methods are included as convenience for the wrappers. InsertTuple() which takes arrays can not be used from wrapped languages. These methods can be used instead.
These methods are included as convenience for the wrappers. InsertTuple() which takes arrays can not be used from wrapped languages. These methods can be used instead.
These methods are included as convenience for the wrappers. InsertTuple() which takes arrays can not be used from wrapped languages. These methods can be used instead.
These methods are included as convenience for the wrappers. InsertTuple() which takes arrays can not be used from wrapped languages. These methods can be used instead.
| void vtkDataArray::InsertTuple9 | ( | vtkIdType | i, |
| double | val0, | ||
| double | val1, | ||
| double | val2, | ||
| double | val3, | ||
| double | val4, | ||
| double | val5, | ||
| double | val6, | ||
| double | val7, | ||
| double | val8 | ||
| ) |
These methods are included as convenience for the wrappers. InsertTuple() which takes arrays can not be used from wrapped languages. These methods can be used instead.
Insert the data tuple at the end of the array and return the location at which the data was inserted. Memory is allocated as necessary to hold the data.
Implemented in vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, vtkPeriodicDataArray< Scalar >, vtkBitArray, vtkCPExodusIIResultsArrayTemplate< Scalar >, and vtkCPExodusIINodalCoordinatesTemplate< Scalar >.
Insert the data tuple at the end of the array and return the location at which the data was inserted. Memory is allocated as necessary to hold the data.
Implemented in vtkPeriodicDataArray< Scalar >, vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, vtkBitArray, vtkCPExodusIIResultsArrayTemplate< Scalar >, and vtkCPExodusIINodalCoordinatesTemplate< Scalar >.
| void vtkDataArray::InsertNextTuple1 | ( | double | value | ) |
These methods are included as convenience for the wrappers. InsertTuple() which takes arrays can not be used from wrapped languages. These methods can be used instead.
These methods are included as convenience for the wrappers. InsertTuple() which takes arrays can not be used from wrapped languages. These methods can be used instead.
These methods are included as convenience for the wrappers. InsertTuple() which takes arrays can not be used from wrapped languages. These methods can be used instead.
These methods are included as convenience for the wrappers. InsertTuple() which takes arrays can not be used from wrapped languages. These methods can be used instead.
| void vtkDataArray::InsertNextTuple9 | ( | double | val0, |
| double | val1, | ||
| double | val2, | ||
| double | val3, | ||
| double | val4, | ||
| double | val5, | ||
| double | val6, | ||
| double | val7, | ||
| double | val8 | ||
| ) |
These methods are included as convenience for the wrappers. InsertTuple() which takes arrays can not be used from wrapped languages. These methods can be used instead.
|
pure virtual |
These methods remove tuples from the data array. They shift data and resize array, so the data array is still valid after this operation. Note, this operation is fairly slow.
Implemented in vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, vtkPeriodicDataArray< Scalar >, vtkBitArray, vtkCPExodusIIResultsArrayTemplate< Scalar >, and vtkCPExodusIINodalCoordinatesTemplate< Scalar >.
|
pure virtual |
These methods remove tuples from the data array. They shift data and resize array, so the data array is still valid after this operation. Note, this operation is fairly slow.
Implemented in vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, vtkPeriodicDataArray< Scalar >, vtkBitArray, vtkCPExodusIIResultsArrayTemplate< Scalar >, and vtkCPExodusIINodalCoordinatesTemplate< Scalar >.
|
pure virtual |
These methods remove tuples from the data array. They shift data and resize array, so the data array is still valid after this operation. Note, this operation is fairly slow.
Implemented in vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, vtkPeriodicDataArray< Scalar >, vtkBitArray, vtkCPExodusIIResultsArrayTemplate< Scalar >, and vtkCPExodusIINodalCoordinatesTemplate< Scalar >.
Return the data component at the ith tuple and jth component location. Note that i is less than NumberOfTuples and j is less than NumberOfComponents.
Reimplemented in vtkDataArrayTemplate< T >, and vtkDataArrayTemplate< Scalar >.
Set the data component at the ith tuple and jth component location. Note that i is less than NumberOfTuples and j is less than NumberOfComponents. Make sure enough memory has been allocated (use SetNumberOfTuples() and SetNumberOfComponents()).
Reimplemented in vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, and vtkBitArray.
Insert the data component at ith tuple and jth component location. Note that memory allocation is performed as necessary to hold the data.
Reimplemented in vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, and vtkBitArray.
|
virtual |
Get the data as a double array in the range (tupleMin,tupleMax) and (compMin, compMax). The resulting double array consists of all data in the tuple range specified and only the component range specified. This process typically requires casting the data from native form into doubleing point values. This method is provided as a convenience for data exchange, and is not very fast.
|
virtual |
Deep copy of data. Copies data from different data arrays even if they are different types (using doubleing-point exchange).
Reimplemented from vtkAbstractArray.
Reimplemented in vtkBitArray, vtkPeriodicDataArray< Scalar >, vtkCPExodusIIResultsArrayTemplate< Scalar >, vtkCPExodusIINodalCoordinatesTemplate< Scalar >, and vtkMappedDataArray< Scalar >.
|
virtual |
Deep copy of data. Copies data from different data arrays even if they are different types (using doubleing-point exchange).
Reimplemented in vtkBitArray, vtkPeriodicDataArray< Scalar >, vtkCPExodusIIResultsArrayTemplate< Scalar >, vtkCPExodusIINodalCoordinatesTemplate< Scalar >, and vtkMappedDataArray< Scalar >.
Fill a component of a data array with a specified value. This method sets the specified component to specified value for all tuples in the data array. This methods can be used to initialize or reinitialize a single component of a multi-component array.
|
virtual |
Copy a component from one data array into a component on this data array. This method copies the specified component ("fromComponent") from the specified data array ("from") to the specified component ("j") over all the tuples in this data array. This method can be used to extract a component (column) from one data array and paste that data into a component on this data array.
Get the address of a particular data index. Make sure data is allocated for the number of items requested. Set MaxId according to the number of data values requested.
Implemented in vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, vtkBitArray, and vtkMappedDataArray< Scalar >.
|
virtual |
Return the memory in kibibytes (1024 bytes) consumed by this data array. Used to support streaming and reading/writing data. The value returned is guaranteed to be greater than or equal to the memory required to actually represent the data represented by this object. The information returned is valid only after the pipeline has been updated.
Implements vtkAbstractArray.
Reimplemented in vtkPeriodicDataArray< Scalar >.
| void vtkDataArray::CreateDefaultLookupTable | ( | ) |
Create default lookup table. Generally used to create one when none is available.
| void vtkDataArray::SetLookupTable | ( | vtkLookupTable * | lut | ) |
Set/get the lookup table associated with this scalar data, if any.
|
virtual |
Set/get the lookup table associated with this scalar data, if any.
The range of the data array values for the given component will be returned in the provided range array argument. If comp is -1, the range of the magnitude (L2 norm) over all components will be provided. The range is computed and then cached, and will not be re-computed on subsequent calls to GetRange() unless the array is modified or the requested component changes. THIS METHOD IS NOT THREAD SAFE.
Definition at line 315 of file vtkDataArray.h.
Return the range of the data array values for the given component. If comp is -1, return the range of the magnitude (L2 norm) over all components.The range is computed and then cached, and will not be re-computed on subsequent calls to GetRange() unless the array is modified or the requested component changes. THIS METHOD IS NOT THREAD SAFE.
Definition at line 328 of file vtkDataArray.h.
|
inline |
Return the range of the data array. If the array has multiple components, then this will return the range of only the first component (component zero). The range is computed and then cached, and will not be re-computed on subsequent calls to GetRange() unless the array is modified. THIS METHOD IS NOT THREAD SAFE.
Definition at line 341 of file vtkDataArray.h.
|
inline |
The the range of the data array values will be returned in the provided range array argument. If the data array has multiple components, then this will return the range of only the first component (component zero). The range is computend and then cached, and will not be re-computed on subsequent calls to GetRange() unless the array is modified. THIS METHOD IS NOT THREAD SAFE.
Definition at line 354 of file vtkDataArray.h.
| void vtkDataArray::GetDataTypeRange | ( | double | range[2] | ) |
These methods return the Min and Max possible range of the native data type. For example if a vtkScalars consists of unsigned char data these will return (0,255).
| double vtkDataArray::GetDataTypeMin | ( | ) |
These methods return the Min and Max possible range of the native data type. For example if a vtkScalars consists of unsigned char data these will return (0,255).
| double vtkDataArray::GetDataTypeMax | ( | ) |
These methods return the Min and Max possible range of the native data type. For example if a vtkScalars consists of unsigned char data these will return (0,255).
These methods return the Min and Max possible range of the native data type. For example if a vtkScalars consists of unsigned char data these will return (0,255).
These methods return the Min and Max possible range of the native data type. For example if a vtkScalars consists of unsigned char data these will return (0,255).
These methods return the Min and Max possible range of the native data type. For example if a vtkScalars consists of unsigned char data these will return (0,255).
|
virtual |
Return the maximum norm for the tuples. Note that the max. is computed every time GetMaxNorm is called.
|
static |
Creates an array for dataType where dataType is one of VTK_BIT, VTK_CHAR, VTK_SIGNED_CHAR, VTK_UNSIGNED_CHAR, VTK_SHORT, VTK_UNSIGNED_SHORT, VTK_INT, VTK_UNSIGNED_INT, VTK_LONG, VTK_UNSIGNED_LONG, VTK_DOUBLE, VTK_DOUBLE, VTK_ID_TYPE. Note that the data array returned has be deleted by the user.
|
static |
This key is used to hold tight bounds on the range of one component over all tuples of the array. Two values (a minimum and maximum) are stored for each component. When GetRange() is called when no tuples are present in the array this value is set to { VTK_DOUBLE_MAX, VTK_DOUBLE_MIN }.
|
static |
This key is used to hold tight bounds on the $L_2$ norm of tuples in the array. Two values (a minimum and maximum) are stored for each component. When GetRange() is called when no tuples are present in the array this value is set to { VTK_DOUBLE_MAX, VTK_DOUBLE_MIN }.
|
virtual |
Copy information instance. Arrays use information objects in a variety of ways. It is important to have flexibility in this regard because certain keys should not be coppied, while others must be. NOTE: Up to the implmeneter to make sure that keys not inteneded to be coppied are excluded here.
Reimplemented from vtkAbstractArray.
|
inlinevirtual |
Method for type-checking in FastDownCast implementations.
Reimplemented from vtkAbstractArray.
Reimplemented in vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, vtkTypedDataArray< Scalar >, vtkTypedDataArray< T >, and vtkMappedDataArray< Scalar >.
Definition at line 403 of file vtkDataArray.h.
Compute the range for a specific component. If comp is set -1 then L2 norm is computed on all components. Call ClearRange to force a recomputation if it is needed. The range is copied to the range argument. THIS METHOD IS NOT THREAD SAFE.
|
protectedvirtual |
Computes the range for each component of an array, the length of ranges must be two times the number of components. Returns true if the range was computed. Will return false if you try to compute the range of an array of length zero.
Reimplemented in vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, and vtkPeriodicDataArray< Scalar >.
|
protectedvirtual |
Reimplemented in vtkDataArrayTemplate< T >, vtkDataArrayTemplate< Scalar >, and vtkPeriodicDataArray< Scalar >.
Friends And Related Function Documentation
|
friend |
Definition at line 407 of file vtkDataArray.h.
Member Data Documentation
|
protected |
Definition at line 429 of file vtkDataArray.h.
|
protected |
Definition at line 430 of file vtkDataArray.h.
The documentation for this class was generated from the following file:
- /home/boeckb/code/depot/group-kitware/vtk/build-release/Utilities/Doxygen/dox/Common/Core/vtkDataArray.h
