map a slice of a vtkImageData to the screen More...

#include <vtkImageResliceMapper.h>

Inheritance diagram for vtkImageResliceMapper:

Collaboration diagram for vtkImageResliceMapper:

Public Types
typedef vtkImageMapper3D	Superclass

Public Types inherited from vtkImageMapper3D
typedef vtkAbstractMapper3D	Superclass

Public Types inherited from vtkAbstractMapper3D
typedef vtkAbstractMapper	Superclass

Public Types inherited from vtkAbstractMapper
typedef vtkAlgorithm	Superclass

Public Types inherited from vtkAlgorithm
enum	DesiredOutputPrecision { SINGLE_PRECISION, DOUBLE_PRECISION, DEFAULT_PRECISION }
	Values used for setting the desired output precision for various algorithms. More...

typedef vtkObject	Superclass

Public Member Functions
virtual vtkTypeBool	IsA (const char *type)
	Return 1 if this class is the same type of (or a subclass of) the named class. More...

vtkImageResliceMapper *	NewInstance () const

void	PrintSelf (ostream &os, vtkIndent indent) override
	Methods invoked by print to print information about the object including superclasses. More...

virtual void	SetSlicePlane (vtkPlane *plane)
	Set the slice that will be used to cut through the image. More...

void	Render (vtkRenderer renderer, vtkImageSlice prop) override
	This should only be called by the renderer. More...

void	ReleaseGraphicsResources (vtkWindow *) override
	Release any graphics resources that are being consumed by this mapper. More...

vtkMTimeType	GetMTime () override
	Get the mtime for the mapper. More...

vtkTypeBool	ProcessRequest (vtkInformation request, vtkInformationVector inInfo, vtkInformationVector outInfo) override
	Handle requests from the pipeline executive. More...

void	GetIndexBounds (double extent[6]) override


virtual void	SetJumpToNearestSlice (vtkTypeBool)
	When using SliceAtFocalPoint, this causes the slicing to occur at the closest slice to the focal point, instead of the default behavior where a new slice is interpolated between the original slices. More...

virtual void	JumpToNearestSliceOn ()
	When using SliceAtFocalPoint, this causes the slicing to occur at the closest slice to the focal point, instead of the default behavior where a new slice is interpolated between the original slices. More...

virtual void	JumpToNearestSliceOff ()
	When using SliceAtFocalPoint, this causes the slicing to occur at the closest slice to the focal point, instead of the default behavior where a new slice is interpolated between the original slices. More...

virtual vtkTypeBool	GetJumpToNearestSlice ()
	When using SliceAtFocalPoint, this causes the slicing to occur at the closest slice to the focal point, instead of the default behavior where a new slice is interpolated between the original slices. More...


virtual void	SetSlabThickness (double)
	The slab thickness, for thick slicing (default: zero) More...

virtual double	GetSlabThickness ()
	The slab thickness, for thick slicing (default: zero) More...


virtual void	SetSlabType (int)
	The slab type, for thick slicing (default: Mean). More...

virtual int	GetSlabType ()
	The slab type, for thick slicing (default: Mean). More...

void	SetSlabTypeToMin ()
	The slab type, for thick slicing (default: Mean). More...

void	SetSlabTypeToMax ()
	The slab type, for thick slicing (default: Mean). More...

void	SetSlabTypeToMean ()
	The slab type, for thick slicing (default: Mean). More...

void	SetSlabTypeToSum ()
	The slab type, for thick slicing (default: Mean). More...

virtual const char *	GetSlabTypeAsString ()
	The slab type, for thick slicing (default: Mean). More...


virtual void	SetSlabSampleFactor (int)
	Set the number of slab samples to use as a factor of the number of input slices within the slab thickness. More...

virtual int	GetSlabSampleFactor ()
	Set the number of slab samples to use as a factor of the number of input slices within the slab thickness. More...


virtual void	SetImageSampleFactor (int)
	Set the reslice sample frequency as in relation to the input image sample frequency. More...

virtual int	GetImageSampleFactor ()
	Set the reslice sample frequency as in relation to the input image sample frequency. More...


virtual void	SetAutoAdjustImageQuality (vtkTypeBool)
	Automatically reduce the rendering quality for greater speed when doing an interactive render. More...

virtual void	AutoAdjustImageQualityOn ()
	Automatically reduce the rendering quality for greater speed when doing an interactive render. More...

virtual void	AutoAdjustImageQualityOff ()
	Automatically reduce the rendering quality for greater speed when doing an interactive render. More...

virtual vtkTypeBool	GetAutoAdjustImageQuality ()
	Automatically reduce the rendering quality for greater speed when doing an interactive render. More...


virtual void	SetResampleToScreenPixels (vtkTypeBool)
	Resample the image directly to the screen pixels, instead of using a texture to scale the image after resampling. More...

virtual void	ResampleToScreenPixelsOn ()
	Resample the image directly to the screen pixels, instead of using a texture to scale the image after resampling. More...

virtual void	ResampleToScreenPixelsOff ()
	Resample the image directly to the screen pixels, instead of using a texture to scale the image after resampling. More...

virtual vtkTypeBool	GetResampleToScreenPixels ()
	Resample the image directly to the screen pixels, instead of using a texture to scale the image after resampling. More...


virtual void	SetSeparateWindowLevelOperation (vtkTypeBool)
	Keep the color mapping stage distinct from the reslicing stage. More...

virtual void	SeparateWindowLevelOperationOn ()
	Keep the color mapping stage distinct from the reslicing stage. More...

virtual void	SeparateWindowLevelOperationOff ()
	Keep the color mapping stage distinct from the reslicing stage. More...

virtual vtkTypeBool	GetSeparateWindowLevelOperation ()
	Keep the color mapping stage distinct from the reslicing stage. More...


virtual void	SetInterpolator (vtkAbstractImageInterpolator *interpolator)
	Set a custom interpolator. More...

virtual vtkAbstractImageInterpolator *	GetInterpolator ()
	Set a custom interpolator. More...


double *	GetBounds () override
	The bounding box (array of six doubles) of the data expressed as (xmin,xmax, ymin,ymax, zmin,zmax). More...

void	GetBounds (double bounds[6]) override
	The bounding box (array of six doubles) of the data expressed as (xmin,xmax, ymin,ymax, zmin,zmax). More...

Public Member Functions inherited from vtkImageMapper3D
vtkImageMapper3D *	NewInstance () const

virtual void	GetSlicePlaneInDataCoords (vtkMatrix4x4 *propMatrix, double plane[4])
	Get the plane as a homogeneous 4-vector that gives the plane equation coefficients. More...

void	SetInputData (vtkImageData *input)
	The input data for this mapper. More...

vtkImageData *	GetInput ()
	The input data for this mapper. More...

vtkDataSet *	GetDataSetInput ()
	The input data for this mapper. More...

vtkDataObject *	GetDataObjectInput ()
	The input data for this mapper. More...

virtual void	SetBorder (vtkTypeBool)
	Instead of displaying the image only out to the image bounds, include a half-voxel border around the image. More...

virtual void	BorderOn ()
	Instead of displaying the image only out to the image bounds, include a half-voxel border around the image. More...

virtual void	BorderOff ()
	Instead of displaying the image only out to the image bounds, include a half-voxel border around the image. More...

virtual vtkTypeBool	GetBorder ()
	Instead of displaying the image only out to the image bounds, include a half-voxel border around the image. More...

virtual void	SetBackground (vtkTypeBool)
	Instead of rendering only to the image border, render out to the viewport boundary with the background color. More...

virtual void	BackgroundOn ()
	Instead of rendering only to the image border, render out to the viewport boundary with the background color. More...

virtual void	BackgroundOff ()
	Instead of rendering only to the image border, render out to the viewport boundary with the background color. More...

virtual vtkTypeBool	GetBackground ()
	Instead of rendering only to the image border, render out to the viewport boundary with the background color. More...

virtual void	SetSliceAtFocalPoint (vtkTypeBool)
	Automatically set the slice position to the camera focal point. More...

virtual void	SliceAtFocalPointOn ()
	Automatically set the slice position to the camera focal point. More...

virtual void	SliceAtFocalPointOff ()
	Automatically set the slice position to the camera focal point. More...

virtual vtkTypeBool	GetSliceAtFocalPoint ()
	Automatically set the slice position to the camera focal point. More...

virtual void	SetSliceFacesCamera (vtkTypeBool)
	Automatically set the slice orientation so that it faces the camera. More...

virtual void	SliceFacesCameraOn ()
	Automatically set the slice orientation so that it faces the camera. More...

virtual void	SliceFacesCameraOff ()
	Automatically set the slice orientation so that it faces the camera. More...

virtual vtkTypeBool	GetSliceFacesCamera ()
	Automatically set the slice orientation so that it faces the camera. More...

virtual vtkPlane *	GetSlicePlane ()
	A plane that describes what slice of the input is being rendered by the mapper. More...

virtual void	SetNumberOfThreads (int)
	The number of threads to create when rendering. More...

virtual int	GetNumberOfThreads ()
	The number of threads to create when rendering. More...

virtual void	SetStreaming (vtkTypeBool)
	Turn on streaming, to pull the minimum amount of data from the input. More...

virtual vtkTypeBool	GetStreaming ()
	Turn on streaming, to pull the minimum amount of data from the input. More...

virtual void	StreamingOn ()
	Turn on streaming, to pull the minimum amount of data from the input. More...

virtual void	StreamingOff ()
	Turn on streaming, to pull the minimum amount of data from the input. More...

Public Member Functions inherited from vtkAbstractMapper3D
vtkAbstractMapper3D *	NewInstance () const

double	GetLength ()
	Return the diagonal length of this mappers bounding box. More...

virtual vtkTypeBool	IsARayCastMapper ()
	Is this a ray cast mapper? A subclass would return 1 if the ray caster is needed to generate an image from this mapper. More...

virtual vtkTypeBool	IsARenderIntoImageMapper ()
	Is this a "render into image" mapper? A subclass would return 1 if the mapper produces an image by rendering into a software image buffer. More...

void	GetClippingPlaneInDataCoords (vtkMatrix4x4 *propMatrix, int i, double planeEquation[4])
	Get the ith clipping plane as a homogeneous plane equation. More...

double *	GetCenter ()
	Return the Center of this mapper's data. More...

void	GetCenter (double center[3])
	Return the Center of this mapper's data. More...

Public Member Functions inherited from vtkAbstractMapper
vtkAbstractMapper *	NewInstance () const

void	SetClippingPlanes (vtkPlanes *planes)
	An alternative way to set clipping planes: use up to six planes found in the supplied instance of the implicit function vtkPlanes. More...

virtual void	ShallowCopy (vtkAbstractMapper *m)
	Make a shallow copy of this mapper. More...

int	GetNumberOfClippingPlanes ()
	Get the number of clipping planes. More...

virtual double	GetTimeToDraw ()
	Get the time required to draw the geometry last time it was rendered. More...

void	AddClippingPlane (vtkPlane *plane)
	Specify clipping planes to be applied when the data is mapped (at most 6 clipping planes can be specified). More...

void	RemoveClippingPlane (vtkPlane *plane)
	Specify clipping planes to be applied when the data is mapped (at most 6 clipping planes can be specified). More...

void	RemoveAllClippingPlanes ()
	Specify clipping planes to be applied when the data is mapped (at most 6 clipping planes can be specified). More...

virtual void	SetClippingPlanes (vtkPlaneCollection *)
	Get/Set the vtkPlaneCollection which specifies the clipping planes. More...

virtual vtkPlaneCollection *	GetClippingPlanes ()
	Get/Set the vtkPlaneCollection which specifies the clipping planes. More...

Public Member Functions inherited from vtkAlgorithm
vtkAlgorithm *	NewInstance () const

int	HasExecutive ()
	Check whether this algorithm has an assigned executive. More...

vtkExecutive *	GetExecutive ()
	Get this algorithm's executive. More...

virtual void	SetExecutive (vtkExecutive *executive)
	Set this algorithm's executive. More...

vtkTypeBool	ProcessRequest (vtkInformation request, vtkCollection inInfo, vtkInformationVector *outInfo)
	Version of ProcessRequest() that is wrapped. More...

virtual int	ComputePipelineMTime (vtkInformation request, vtkInformationVector inInfoVec, vtkInformationVector outInfoVec, int requestFromOutputPort, vtkMTimeType *mtime)
	A special version of ProcessRequest meant specifically for the pipeline modified time request. More...

virtual int	ModifyRequest (vtkInformation *request, int when)
	This method gives the algorithm a chance to modify the contents of a request before or after (specified in the when argument) it is forwarded. More...

vtkInformation *	GetInputPortInformation (int port)
	Get the information object associated with an input port. More...

vtkInformation *	GetOutputPortInformation (int port)
	Get the information object associated with an output port. More...

int	GetNumberOfInputPorts ()
	Get the number of input ports used by the algorithm. More...

int	GetNumberOfOutputPorts ()
	Get the number of output ports provided by the algorithm. More...

void	SetProgress (double)
	`SetProgress` is deprecated. More...

void	UpdateProgress (double amount)
	Update the progress of the process object. More...

virtual void	SetInputArrayToProcess (int idx, int port, int connection, const char fieldAssociation, const char attributeTypeorName)
	String based versions of SetInputArrayToProcess(). More...

vtkInformation *	GetInputArrayInformation (int idx)
	Get the info object for the specified input array to this algorithm. More...

void	RemoveAllInputs ()
	Remove all the input data. More...

vtkDataObject *	GetOutputDataObject (int port)
	Get the data object that will contain the algorithm output for the given port. More...

vtkDataObject *	GetInputDataObject (int port, int connection)
	Get the data object that will contain the algorithm input for the given port and given connection. More...

virtual void	RemoveInputConnection (int port, vtkAlgorithmOutput *input)
	Remove a connection from the given input port index. More...

virtual void	RemoveInputConnection (int port, int idx)
	Remove a connection given by index idx. More...

virtual void	RemoveAllInputConnections (int port)
	Removes all input connections. More...

virtual void	SetInputDataObject (int port, vtkDataObject *data)
	Sets the data-object as an input on the given port index. More...

virtual void	SetInputDataObject (vtkDataObject *data)

virtual void	AddInputDataObject (int port, vtkDataObject *data)
	Add the data-object as an input to this given port. More...

virtual void	AddInputDataObject (vtkDataObject *data)

vtkAlgorithmOutput *	GetOutputPort (int index)
	Get a proxy object corresponding to the given output port of this algorithm. More...

vtkAlgorithmOutput *	GetOutputPort ()

int	GetNumberOfInputConnections (int port)
	Get the number of inputs currently connected to a port. More...

int	GetTotalNumberOfInputConnections ()
	Get the total number of inputs for this algorithm. More...

vtkAlgorithmOutput *	GetInputConnection (int port, int index)
	Get the algorithm output port connected to an input port. More...

vtkAlgorithm *	GetInputAlgorithm (int port, int index, int &algPort)
	Returns the algorithm and the output port index of that algorithm connected to a port-index pair. More...

vtkAlgorithm *	GetInputAlgorithm (int port, int index)
	Returns the algorithm connected to a port-index pair. More...

vtkAlgorithm *	GetInputAlgorithm ()
	Equivalent to GetInputAlgorithm(0, 0). More...

vtkExecutive *	GetInputExecutive (int port, int index)
	Returns the executive associated with a particular input connection. More...

vtkExecutive *	GetInputExecutive ()
	Equivalent to GetInputExecutive(0, 0) More...

vtkInformation *	GetInputInformation (int port, int index)
	Return the information object that is associated with a particular input connection. More...

vtkInformation *	GetInputInformation ()
	Equivalent to GetInputInformation(0, 0) More...

vtkInformation *	GetOutputInformation (int port)
	Return the information object that is associated with a particular output port. More...

virtual int	UpdatePiece (int piece, int numPieces, int ghostLevels, const int extents[6]=nullptr)
	Convenience method to update an algorithm after passing requests to its first output port. More...

virtual int	UpdateExtent (const int extents[6])
	Convenience method to update an algorithm after passing requests to its first output port. More...

virtual int	UpdateTimeStep (double time, int piece=-1, int numPieces=1, int ghostLevels=0, const int extents[6]=nullptr)
	Convenience method to update an algorithm after passing requests to its first output port. More...

virtual void	UpdateInformation ()
	Bring the algorithm's information up-to-date. More...

virtual void	UpdateDataObject ()
	Create output object(s). More...

virtual void	PropagateUpdateExtent ()
	Propagate meta-data upstream. More...

virtual void	UpdateWholeExtent ()
	Bring this algorithm's outputs up-to-date. More...

void	ConvertTotalInputToPortConnection (int ind, int &port, int &conn)
	Convenience routine to convert from a linear ordering of input connections to a port/connection pair. More...

virtual vtkInformation *	GetInformation ()
	Set/Get the information object associated with this algorithm. More...

virtual void	SetInformation (vtkInformation *)
	Set/Get the information object associated with this algorithm. More...

void	Register (vtkObjectBase *o) override
	Participate in garbage collection. More...

void	UnRegister (vtkObjectBase *o) override
	Participate in garbage collection. More...

virtual void	SetAbortExecute (vtkTypeBool)
	Set/Get the AbortExecute flag for the process object. More...

virtual vtkTypeBool	GetAbortExecute ()
	Set/Get the AbortExecute flag for the process object. More...

virtual void	AbortExecuteOn ()
	Set/Get the AbortExecute flag for the process object. More...

virtual void	AbortExecuteOff ()
	Set/Get the AbortExecute flag for the process object. More...

virtual double	GetProgress ()
	Get the execution progress of a process object. More...

void	SetProgressShiftScale (double shift, double scale)
	Specify the shift and scale values to use to apply to the progress amount when `UpdateProgress` is called. More...

virtual double	GetProgressShift ()
	Specify the shift and scale values to use to apply to the progress amount when `UpdateProgress` is called. More...

virtual double	GetProgressScale ()
	Specify the shift and scale values to use to apply to the progress amount when `UpdateProgress` is called. More...

void	SetProgressText (const char *ptext)
	Set the current text message associated with the progress state. More...

virtual char *	GetProgressText ()
	Set the current text message associated with the progress state. More...

virtual unsigned long	GetErrorCode ()
	The error code contains a possible error that occurred while reading or writing the file. More...

virtual void	SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, const char *name)
	Set the input data arrays that this algorithm will process. More...

virtual void	SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, int fieldAttributeType)
	Set the input data arrays that this algorithm will process. More...

virtual void	SetInputArrayToProcess (int idx, vtkInformation *info)
	Set the input data arrays that this algorithm will process. More...

virtual void	SetInputConnection (int port, vtkAlgorithmOutput *input)
	Set the connection for the given input port index. More...

virtual void	SetInputConnection (vtkAlgorithmOutput *input)
	Set the connection for the given input port index. More...

virtual void	AddInputConnection (int port, vtkAlgorithmOutput *input)
	Add a connection to the given input port index. More...

virtual void	AddInputConnection (vtkAlgorithmOutput *input)
	Add a connection to the given input port index. More...

virtual void	SetReleaseDataFlag (int)
	Turn release data flag on or off for all output ports. More...

virtual int	GetReleaseDataFlag ()
	Turn release data flag on or off for all output ports. More...

void	ReleaseDataFlagOn ()
	Turn release data flag on or off for all output ports. More...

void	ReleaseDataFlagOff ()
	Turn release data flag on or off for all output ports. More...

int	UpdateExtentIsEmpty (vtkInformation pinfo, vtkDataObject output)
	This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. More...

int	UpdateExtentIsEmpty (vtkInformation *pinfo, int extentType)
	This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. More...

int *	GetUpdateExtent ()
	These functions return the update extent for output ports that use 3D extents. More...

int *	GetUpdateExtent (int port)
	These functions return the update extent for output ports that use 3D extents. More...

void	GetUpdateExtent (int &x0, int &x1, int &y0, int &y1, int &z0, int &z1)
	These functions return the update extent for output ports that use 3D extents. More...

void	GetUpdateExtent (int port, int &x0, int &x1, int &y0, int &y1, int &z0, int &z1)
	These functions return the update extent for output ports that use 3D extents. More...

void	GetUpdateExtent (int extent[6])
	These functions return the update extent for output ports that use 3D extents. More...

void	GetUpdateExtent (int port, int extent[6])
	These functions return the update extent for output ports that use 3D extents. More...

int	GetUpdatePiece ()
	These functions return the update extent for output ports that use piece extents. More...

int	GetUpdatePiece (int port)
	These functions return the update extent for output ports that use piece extents. More...

int	GetUpdateNumberOfPieces ()
	These functions return the update extent for output ports that use piece extents. More...

int	GetUpdateNumberOfPieces (int port)
	These functions return the update extent for output ports that use piece extents. More...

int	GetUpdateGhostLevel ()
	These functions return the update extent for output ports that use piece extents. More...

int	GetUpdateGhostLevel (int port)
	These functions return the update extent for output ports that use piece extents. More...

void	SetProgressObserver (vtkProgressObserver *)
	If an ProgressObserver is set, the algorithm will report progress through it rather than directly. More...

virtual vtkProgressObserver *	GetProgressObserver ()
	If an ProgressObserver is set, the algorithm will report progress through it rather than directly. More...

Public Member Functions inherited from vtkObject
	vtkBaseTypeMacro (vtkObject, vtkObjectBase)

virtual void	DebugOn ()
	Turn debugging output on. More...

virtual void	DebugOff ()
	Turn debugging output off. More...

bool	GetDebug ()
	Get the value of the debug flag. More...

void	SetDebug (bool debugFlag)
	Set the value of the debug flag. More...

virtual void	Modified ()
	Update the modification time for this object. More...

void	RemoveObserver (unsigned long tag)

void	RemoveObservers (unsigned long event)

void	RemoveObservers (const char *event)

void	RemoveAllObservers ()

vtkTypeBool	HasObserver (unsigned long event)

vtkTypeBool	HasObserver (const char *event)

int	InvokeEvent (unsigned long event)

int	InvokeEvent (const char *event)

unsigned long	AddObserver (unsigned long event, vtkCommand *, float priority=0.0f)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

unsigned long	AddObserver (const char event, vtkCommand , float priority=0.0f)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

vtkCommand *	GetCommand (unsigned long tag)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

void	RemoveObserver (vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

void	RemoveObservers (unsigned long event, vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

void	RemoveObservers (const char event, vtkCommand )
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

vtkTypeBool	HasObserver (unsigned long event, vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

vtkTypeBool	HasObserver (const char event, vtkCommand )
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, void(T::*callback)(), float priority=0.0f)
	Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...

template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, void(T::callback)(vtkObject , unsigned long, void *), float priority=0.0f)
	Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...

template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, bool(T::callback)(vtkObject , unsigned long, void *), float priority=0.0f)
	Allow user to set the AbortFlagOn() with the return value of the callback method. More...

int	InvokeEvent (unsigned long event, void *callData)
	This method invokes an event and return whether the event was aborted or not. More...

int	InvokeEvent (const char event, void callData)
	This method invokes an event and return whether the event was aborted or not. More...

Public Member Functions inherited from vtkObjectBase
const char *	GetClassName () const
	Return the class name as a string. More...

virtual vtkIdType	GetNumberOfGenerationsFromBase (const char *name)
	Given the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). More...

virtual void	Delete ()
	Delete a VTK object. More...

virtual void	FastDelete ()
	Delete a reference to this object. More...

void	InitializeObjectBase ()

void	Print (ostream &os)
	Print an object to an ostream. More...

int	GetReferenceCount ()
	Return the current reference count of this object. More...

void	SetReferenceCount (int)
	Sets the reference count. More...

bool	GetIsInMemkind () const
	A local state flag that remembers whether this object lives in the normal or extended memory space. More...

virtual void	PrintHeader (ostream &os, vtkIndent indent)
	Methods invoked by print to print information about the object including superclasses. More...

virtual void	PrintTrailer (ostream &os, vtkIndent indent)
	Methods invoked by print to print information about the object including superclasses. More...

Static Public Member Functions
static vtkImageResliceMapper *	New ()

static vtkTypeBool	IsTypeOf (const char *type)

static vtkImageResliceMapper *	SafeDownCast (vtkObjectBase *o)

Static Public Member Functions inherited from vtkImageMapper3D
static vtkTypeBool	IsTypeOf (const char *type)

static vtkImageMapper3D *	SafeDownCast (vtkObjectBase *o)

Static Public Member Functions inherited from vtkAbstractMapper3D
static vtkTypeBool	IsTypeOf (const char *type)

static vtkAbstractMapper3D *	SafeDownCast (vtkObjectBase *o)

Static Public Member Functions inherited from vtkAbstractMapper
static vtkTypeBool	IsTypeOf (const char *type)

static vtkAbstractMapper *	SafeDownCast (vtkObjectBase *o)

static vtkDataArray *	GetScalars (vtkDataSet input, int scalarMode, int arrayAccessMode, int arrayId, const char arrayName, int &cellFlag)
	Internal helper function for getting the active scalars. More...

static vtkAbstractArray *	GetAbstractScalars (vtkDataSet input, int scalarMode, int arrayAccessMode, int arrayId, const char arrayName, int &cellFlag)
	Internal helper function for getting the active scalars as an abstract array. More...

Static Public Member Functions inherited from vtkAlgorithm
static vtkAlgorithm *	New ()

static vtkTypeBool	IsTypeOf (const char *type)

static vtkAlgorithm *	SafeDownCast (vtkObjectBase *o)

static vtkInformationIntegerKey *	INPUT_IS_OPTIONAL ()
	Keys used to specify input port requirements. More...

static vtkInformationIntegerKey *	INPUT_IS_REPEATABLE ()

static vtkInformationInformationVectorKey *	INPUT_REQUIRED_FIELDS ()

static vtkInformationStringVectorKey *	INPUT_REQUIRED_DATA_TYPE ()

static vtkInformationInformationVectorKey *	INPUT_ARRAYS_TO_PROCESS ()

static vtkInformationIntegerKey *	INPUT_PORT ()

static vtkInformationIntegerKey *	INPUT_CONNECTION ()

static vtkInformationIntegerKey *	CAN_PRODUCE_SUB_EXTENT ()
	This key tells the executive that a particular output port is capable of producing an arbitrary subextent of the whole extent. More...

static vtkInformationIntegerKey *	CAN_HANDLE_PIECE_REQUEST ()
	Key that tells the pipeline that a particular algorithm can or cannot handle piece request. More...

static void	SetDefaultExecutivePrototype (vtkExecutive *proto)
	If the DefaultExecutivePrototype is set, a copy of it is created in CreateDefaultExecutive() using NewInstance(). More...

Static Public Member Functions inherited from vtkObject
static vtkObject *	New ()
	Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More...

static void	BreakOnError ()
	This method is called when vtkErrorMacro executes. More...

static void	SetGlobalWarningDisplay (int val)
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

static void	GlobalWarningDisplayOn ()
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

static void	GlobalWarningDisplayOff ()
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

static int	GetGlobalWarningDisplay ()
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

Static Public Member Functions inherited from vtkObjectBase
static vtkTypeBool	IsTypeOf (const char *name)
	Return 1 if this class type is the same type of (or a subclass of) the named class. More...

static vtkIdType	GetNumberOfGenerationsFromBaseType (const char *name)
	Given a the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). More...

static vtkObjectBase *	New ()
	Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More...

static void	SetMemkindDirectory (const char *directoryname)
	The name of a directory, ideally mounted -o dax, to memory map an extended memory space within. More...

static bool	GetUsingMemkind ()
	A global state flag that controls whether vtkObjects are constructed in the usual way (the default) or within the extended memory space. More...

Protected Member Functions
virtual vtkObjectBase *	NewInstanceInternal () const

	vtkImageResliceMapper ()

	~vtkImageResliceMapper () override

void	CheckerboardImage (vtkImageData input, vtkCamera camera, vtkImageProperty *property)
	Do a checkerboard pattern to the alpha of an RGBA image. More...

void	UpdateSliceToWorldMatrix (vtkCamera *camera)
	Update the slice-to-world matrix from the camera. More...

void	UpdateWorldToDataMatrix (vtkImageSlice *prop)
	Check if the vtkProp3D matrix has changed, and if so, set the WorldToDataMatrix to its inverse. More...

void	UpdateResliceMatrix (vtkRenderer ren, vtkImageSlice prop)
	Update the reslice matrix, which is the slice-to-data matrix. More...

void	UpdateResliceInformation (vtkRenderer *ren)
	Set all of the reslicing parameters. More...

void	UpdateResliceInterpolation (vtkImageProperty *property)
	Set the interpolation. More...

void	UpdateColorInformation (vtkImageProperty *property)
	Update anything related to the image coloring. More...

void	UpdatePolygonCoords (vtkRenderer *ren)
	Make a polygon by cutting the data bounds with a plane. More...

void	ReportReferences (vtkGarbageCollector *) override
	Garbage collection for reference loops. More...


void	Update (int port) override
	Override Update to handle some tricky details. More...

void	Update () override
	Override Update to handle some tricky details. More...

vtkTypeBool	Update (int port, vtkInformationVector *requests) override
	Override Update to handle some tricky details. More...

vtkTypeBool	Update (vtkInformation *requests) override
	Override Update to handle some tricky details. More...

Protected Member Functions inherited from vtkImageMapper3D
	vtkImageMapper3D ()

	~vtkImageMapper3D () override

unsigned char *	MakeTextureData (vtkImageProperty property, vtkImageData input, int extent[6], int &xsize, int &ysize, int &bytesPerPixel, bool &reuseTexture, bool &reuseData)
	Perform window/level and color mapping operations to produce unsigned char data that can be used as a texture. More...

void	MakeTextureGeometry (const int extent[6], double coords[12], double tcoords[8])
	Compute the coordinates and texture coordinates for the image, given an extent that describes a single slice. More...

virtual void	ComputeTextureSize (const int extent[6], int &xdim, int &ydim, int imageSize[2], int textureSize[2])
	Given an extent that describes a slice (it must have unit thickness in one of the three directions), return the dimension indices that correspond to the texture "x" and "y", provide the x, y image size, and provide the texture size (padded to a power of two if the hardware requires). More...

vtkRenderer *	GetCurrentRenderer ()
	Get the renderer associated with this mapper, or zero if none. More...

vtkImageSlice *	GetCurrentProp ()
	Get the vtkImage prop associated with this mapper, or zero if none. More...

vtkMatrix4x4 *	GetDataToWorldMatrix ()
	Get the data-to-world matrix for this mapper, according to the assembly path for its prop. More...

void	GetBackgroundColor (vtkImageProperty *property, double color[4])
	Get the background color, by using the first color in the supplied lookup table, or black if there is no lookup table. More...

int	FillInputPortInformation (int port, vtkInformation *info) override
	See algorithm for more info. More...

int	FillOutputPortInformation (int port, vtkInformation *info) override
	See algorithm for more info. More...

Protected Member Functions inherited from vtkAbstractMapper3D
	vtkAbstractMapper3D ()

	~vtkAbstractMapper3D () override=default

Protected Member Functions inherited from vtkAbstractMapper
	vtkAbstractMapper ()

	~vtkAbstractMapper () override

Protected Member Functions inherited from vtkAlgorithm
	vtkAlgorithm ()

	~vtkAlgorithm () override

virtual void	SetNumberOfInputPorts (int n)
	Set the number of input ports used by the algorithm. More...

virtual void	SetNumberOfOutputPorts (int n)
	Set the number of output ports provided by the algorithm. More...

int	InputPortIndexInRange (int index, const char *action)

int	OutputPortIndexInRange (int index, const char *action)

int	GetInputArrayAssociation (int idx, vtkInformationVector **inputVector)
	Get the assocition of the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...

vtkInformation *	GetInputArrayFieldInformation (int idx, vtkInformationVector **inputVector)
	This method takes in an index (as specified in SetInputArrayToProcess) and a pipeline information vector. More...

virtual vtkExecutive *	CreateDefaultExecutive ()
	Create a default executive. More...

virtual void	SetNthInputConnection (int port, int index, vtkAlgorithmOutput *input)
	Replace the Nth connection on the given input port. More...

virtual void	SetNumberOfInputConnections (int port, int n)
	Set the number of input connections on the given input port. More...

void	SetInputDataInternal (int port, vtkDataObject *input)
	These methods are used by subclasses to implement methods to set data objects directly as input. More...

void	AddInputDataInternal (int port, vtkDataObject *input)

int	GetInputArrayAssociation (int idx, int connection, vtkInformationVector **inputVector)
	Filters that have multiple connections on one port can use this signature. More...

int	GetInputArrayAssociation (int idx, vtkDataObject *input)
	Filters that have multiple connections on one port can use this signature. More...

vtkDataArray *	GetInputArrayToProcess (int idx, vtkInformationVector **inputVector)
	Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...

vtkDataArray *	GetInputArrayToProcess (int idx, vtkInformationVector **inputVector, int &association)
	Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...

vtkDataArray *	GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector)
	Filters that have multiple connections on one port can use this signature. More...

vtkDataArray *	GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association)
	Filters that have multiple connections on one port can use this signature. More...

vtkDataArray *	GetInputArrayToProcess (int idx, vtkDataObject *input)
	Filters that have multiple connections on one port can use this signature. More...

vtkDataArray *	GetInputArrayToProcess (int idx, vtkDataObject *input, int &association)
	Filters that have multiple connections on one port can use this signature. More...

vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector)
	Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...

vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector, int &association)
	Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...

vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector)
	Filters that have multiple connections on one port can use this signature. More...

vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association)
	Filters that have multiple connections on one port can use this signature. More...

vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, vtkDataObject *input)
	Filters that have multiple connections on one port can use this signature. More...

vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, vtkDataObject *input, int &association)
	Filters that have multiple connections on one port can use this signature. More...

virtual void	SetErrorCode (unsigned long)
	The error code contains a possible error that occurred while reading or writing the file. More...

Protected Member Functions inherited from vtkObject
	vtkObject ()

	~vtkObject () override

void	RegisterInternal (vtkObjectBase *, vtkTypeBool check) override

void	UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) override

void	InternalGrabFocus (vtkCommand mouseEvents, vtkCommand keypressEvents=nullptr)
	These methods allow a command to exclusively grab all events. More...

void	InternalReleaseFocus ()
	These methods allow a command to exclusively grab all events. More...

Protected Member Functions inherited from vtkObjectBase
	vtkObjectBase ()

virtual	~vtkObjectBase ()

	vtkObjectBase (const vtkObjectBase &)

void	operator= (const vtkObjectBase &)

Protected Attributes
vtkImageSliceMapper *	SliceMapper

vtkTypeBool	JumpToNearestSlice

vtkTypeBool	AutoAdjustImageQuality

vtkTypeBool	SeparateWindowLevelOperation

double	SlabThickness

int	SlabType

int	SlabSampleFactor

int	ImageSampleFactor

vtkTypeBool	ResampleToScreenPixels

int	InternalResampleToScreenPixels

int	ResliceNeedUpdate

vtkImageResliceToColors *	ImageReslice

vtkMatrix4x4 *	ResliceMatrix

vtkMatrix4x4 *	WorldToDataMatrix

vtkMatrix4x4 *	SliceToWorldMatrix

vtkTimeStamp	UpdateTime

Protected Attributes inherited from vtkImageMapper3D
vtkTypeBool	Border

vtkTypeBool	Background

vtkScalarsToColors *	DefaultLookupTable

vtkMultiThreader *	Threader

int	NumberOfThreads

vtkTypeBool	Streaming

vtkPlane *	SlicePlane

vtkTypeBool	SliceAtFocalPoint

vtkTypeBool	SliceFacesCamera

double	DataSpacing [3]

double	DataOrigin [3]

double	DataDirection [9]

int	DataWholeExtent [6]

bool	MatteEnable

bool	ColorEnable

bool	DepthEnable

Protected Attributes inherited from vtkAbstractMapper3D
double	Bounds [6]

double	Center [3]

Protected Attributes inherited from vtkAbstractMapper
vtkTimerLog *	Timer

double	TimeToDraw

vtkWindow *	LastWindow

vtkPlaneCollection *	ClippingPlanes

Protected Attributes inherited from vtkAlgorithm
vtkInformation *	Information

double	Progress

char *	ProgressText

vtkProgressObserver *	ProgressObserver

unsigned long	ErrorCode
	The error code contains a possible error that occurred while reading or writing the file. More...

Protected Attributes inherited from vtkObject
bool	Debug

vtkTimeStamp	MTime

vtkSubjectHelper *	SubjectHelper

Protected Attributes inherited from vtkObjectBase
std::atomic< int32_t >	ReferenceCount

vtkWeakPointerBase **	WeakPointers

Additional Inherited Members
Public Attributes inherited from vtkAlgorithm
vtkTypeBool	AbortExecute

Static Protected Member Functions inherited from vtkImageMapper3D
static void	CheckerboardRGBA (unsigned char *data, int xsize, int ysize, double originx, double originy, double spacingx, double spacingy)
	Checkerboard the alpha component of an RGBA image. More...

Static Protected Member Functions inherited from vtkAlgorithm
static vtkInformationIntegerKey *	PORT_REQUIREMENTS_FILLED ()

Static Protected Member Functions inherited from vtkObjectBase
static vtkMallocingFunction	GetCurrentMallocFunction ()

static vtkReallocingFunction	GetCurrentReallocFunction ()

static vtkFreeingFunction	GetCurrentFreeFunction ()

static vtkFreeingFunction	GetAlternateFreeFunction ()

Static Protected Attributes inherited from vtkAlgorithm
static vtkExecutive *	DefaultExecutivePrototype

Detailed Description

map a slice of a vtkImageData to the screen

vtkImageResliceMapper will cut a 3D image with an abitrary slice plane and draw the results on the screen. The slice can be set to automatically follow the camera, so that the camera controls the slicing.

Thanks:: Thanks to David Gobbi at the Seaman Family MR Centre and Dept. of Clinical Neurosciences, Foothills Medical Centre, Calgary, for providing this class.

See also: vtkImageSlice vtkImageProperty vtkImageSliceMapper

Definition at line 46 of file vtkImageResliceMapper.h.

Member Typedef Documentation

◆ Superclass

typedef vtkImageMapper3D vtkImageResliceMapper::Superclass

Definition at line 50 of file vtkImageResliceMapper.h.

Constructor & Destructor Documentation

◆ vtkImageResliceMapper()

vtkImageResliceMapper::vtkImageResliceMapper ( )

protected

◆ ~vtkImageResliceMapper()

vtkImageResliceMapper::~vtkImageResliceMapper ( )

overrideprotected

Member Function Documentation

◆ New()

static vtkImageResliceMapper* vtkImageResliceMapper::New ( )

static

◆ IsTypeOf()

static vtkTypeBool vtkImageResliceMapper::IsTypeOf ( const char * type )

static

◆ IsA()

virtual vtkTypeBool vtkImageResliceMapper::IsA ( const char * name )

virtual

Return 1 if this class is the same type of (or a subclass of) the named class.

Returns 0 otherwise. This method works in combination with vtkTypeMacro found in vtkSetGet.h.

Reimplemented from vtkImageMapper3D.

◆ SafeDownCast()

static vtkImageResliceMapper* vtkImageResliceMapper::SafeDownCast ( vtkObjectBase * o )

static

◆ NewInstanceInternal()

virtual vtkObjectBase* vtkImageResliceMapper::NewInstanceInternal ( ) const

protectedvirtual

Reimplemented from vtkImageMapper3D.

◆ NewInstance()

vtkImageResliceMapper* vtkImageResliceMapper::NewInstance ( ) const

◆ PrintSelf()

void vtkImageResliceMapper::PrintSelf	(	ostream &	os,
		vtkIndent	indent
	)

overridevirtual

Methods invoked by print to print information about the object including superclasses.

Typically not called by the user (use Print() instead) but used in the hierarchical print process to combine the output of several classes.

Reimplemented from vtkImageMapper3D.

◆ SetSlicePlane()

virtual void vtkImageResliceMapper::SetSlicePlane ( vtkPlane * plane )

virtual

Set the slice that will be used to cut through the image.

This slice should be in world coordinates, rather than data coordinates. Use SliceFacesCamera and SliceAtFocalPoint if you want the slice to automatically follow the camera.

◆ SetJumpToNearestSlice()

virtual void vtkImageResliceMapper::SetJumpToNearestSlice ( vtkTypeBool )

virtual

When using SliceAtFocalPoint, this causes the slicing to occur at the closest slice to the focal point, instead of the default behavior where a new slice is interpolated between the original slices.

This flag is ignored if the slicing is oblique to the original slices.

◆ JumpToNearestSliceOn()

virtual void vtkImageResliceMapper::JumpToNearestSliceOn ( )

virtual

When using SliceAtFocalPoint, this causes the slicing to occur at the closest slice to the focal point, instead of the default behavior where a new slice is interpolated between the original slices.

This flag is ignored if the slicing is oblique to the original slices.

◆ JumpToNearestSliceOff()

virtual void vtkImageResliceMapper::JumpToNearestSliceOff ( )

virtual

When using SliceAtFocalPoint, this causes the slicing to occur at the closest slice to the focal point, instead of the default behavior where a new slice is interpolated between the original slices.

This flag is ignored if the slicing is oblique to the original slices.

◆ GetJumpToNearestSlice()

virtual vtkTypeBool vtkImageResliceMapper::GetJumpToNearestSlice ( )

virtual

When using SliceAtFocalPoint, this causes the slicing to occur at the closest slice to the focal point, instead of the default behavior where a new slice is interpolated between the original slices.

This flag is ignored if the slicing is oblique to the original slices.

◆ SetSlabThickness()

virtual void vtkImageResliceMapper::SetSlabThickness ( double )

virtual

The slab thickness, for thick slicing (default: zero)

◆ GetSlabThickness()

virtual double vtkImageResliceMapper::GetSlabThickness ( )

virtual

The slab thickness, for thick slicing (default: zero)