Main Page   Class Hierarchy   Alphabetical List   Compound List   File List   Compound Members   File Members   Related Pages  

vtkPLOT3DReader Class Reference

#include <vtkPLOT3DReader.h>

Inheritance diagram for vtkPLOT3DReader:

Inheritance graph
[legend]
Collaboration diagram for vtkPLOT3DReader:

Collaboration graph
[legend]
List of all members.

Detailed Description

read PLOT3D data files

Date:
2002/09/05 18:50:32
Revision:
1.53

vtkPLOT3DReader is a reader object that reads PLOT3D formatted files and generates structured grid(s) on output. PLOT3D is a computer graphics program designed to visualize the grids and solutions of computational fluid dynamics. Please see the "PLOT3D User's Manual" available from NASA Ames Research Center, Moffett Field CA.

PLOT3D files consist of a grid file (also known as XYZ file), an optional solution file (also known as a Q file), and an optional function file that contains user created data (currently unsupported). The Q file contains solution information as follows: the four parameters free stream mach number (Fsmach), angle of attack (Alpha), Reynolds number (Re), and total integration time (Time). This information is stored in an array called Properties in the FieldData of each output (tuple 0: fsmach, tuple 1: alpha, tuple 2: re, tuple 3: time). In addition, the solution file contains the flow density (scalar), flow momentum (vector), and flow energy (scalar).

The reader can generate additional scalars and vectors (or "functions") from this information. To use vtkPLOT3DReader, you must specify the particular function number for the scalar and vector you want to visualize. This implementation of the reader provides the following functions. The scalar functions are: -1 - don't read or compute any scalars 100 - density 110 - pressure 120 - temperature 130 - enthalpy 140 - internal energy 144 - kinetic energy 153 - velocity magnitude 163 - stagnation energy 170 - entropy 184 - swirl.

The vector functions are: -1 - don't read or compute any vectors 200 - velocity 201 - vorticity 202 - momentum 210 - pressure gradient.

(Other functions are described in the PLOT3D spec, but only those listed are implemented here.) Note that by default, this reader creates the density scalar (100) and momentum vector (202) as output. (These are just read in from the solution file.) Please note that the validity of computation is a function of this class's gas constants (R, Gamma) and the equations used. They may not be suitable for your computational domain.

Additionally, you can read other data and associate it as a vtkDataArray into the output's point attribute data. Use the method AddFunction() to list all the functions that you'd like to read. AddFunction() accepts an integer parameter that defines the function number.

See also:
vtkStructuredGridSource vtkStructuredGrid
Created by:
  • Schroeder, Will
CVS contributions (if > 5%):
  • Schroeder, Will (50%)
  • Geveci, Berk (36%)
  • Martin, Ken (7%)
CVS logs (CVSweb):
  • .cxx (/IO/vtkPLOT3DReader.cxx)
  • .h (/IO/vtkPLOT3DReader.h)
Examples:
vtkPLOT3DReader (Examples)
Tests:
vtkPLOT3DReader (Tests)

Definition at line 104 of file vtkPLOT3DReader.h.

Public Types

typedef vtkStructuredGridSource Superclass
enum  { FILE_BIG_ENDIAN = 0, FILE_LITTLE_ENDIAN = 1 }

Public Methods

virtual const char * GetClassName ()
virtual int IsA (const char *type)
void PrintSelf (ostream &os, vtkIndent indent)
void SetOutput (int idx, vtkStructuredGrid *output)
virtual int CanReadFile (const char *fname)
void SetFileName (const char *name)
const char * GetFileName ()
virtual void SetXYZFileName (const char *)
virtual char * GetXYZFileName ()
virtual void SetQFileName (const char *)
virtual char * GetQFileName ()
int GetNumberOfOutputs ()
int GetNumberOfGrids ()
virtual void SetBinaryFile (int)
virtual int GetBinaryFile ()
virtual void BinaryFileOn ()
virtual void BinaryFileOff ()
virtual void SetMultiGrid (int)
virtual int GetMultiGrid ()
virtual void MultiGridOn ()
virtual void MultiGridOff ()
virtual void SetHasByteCount (int)
virtual int GetHasByteCount ()
virtual void HasByteCountOn ()
virtual void HasByteCountOff ()
virtual void SetIBlanking (int)
virtual int GetIBlanking ()
virtual void IBlankingOn ()
virtual void IBlankingOff ()
virtual void SetTwoDimensionalGeometry (int)
virtual int GetTwoDimensionalGeometry ()
virtual void TwoDimensionalGeometryOn ()
virtual void TwoDimensionalGeometryOff ()
virtual void SetForceRead (int)
virtual int GetForceRead ()
virtual void ForceReadOn ()
virtual void ForceReadOff ()
virtual void SetDoNotReduceNumberOfOutputs (int)
virtual int GetDoNotReduceNumberOfOutputs ()
virtual void DoNotReduceNumberOfOutputsOn ()
virtual void DoNotReduceNumberOfOutputsOff ()
void SetByteOrderToBigEndian ()
void SetByteOrderToLittleEndian ()
virtual void SetByteOrder (int)
virtual int GetByteOrder ()
const char * GetByteOrderAsString ()
virtual void SetR (float)
virtual float GetR ()
virtual void SetGamma (float)
virtual float GetGamma ()
virtual void SetUvinf (float)
virtual float GetUvinf ()
virtual void SetVvinf (float)
virtual float GetVvinf ()
virtual void SetWvinf (float)
virtual float GetWvinf ()
void SetScalarFunctionNumber (int num)
virtual int GetScalarFunctionNumber ()
void SetVectorFunctionNumber (int num)
virtual int GetVectorFunctionNumber ()
void AddFunction (int functionNumber)
void RemoveFunction (int)
void RemoveAllFunctions ()

Static Public Methods

vtkPLOT3DReader * New ()
int IsTypeOf (const char *type)
vtkPLOT3DReader * SafeDownCast (vtkObject *o)

Protected Methods

 vtkPLOT3DReader ()
 ~vtkPLOT3DReader ()
void ExecuteInformation ()
void Execute ()
int CheckFile (FILE *&fp, const char *fname)
int CheckGeometryFile (FILE *&xyzFp)
int CheckSolutionFile (FILE *&qFp)
void SkipByteCount (FILE *fp)
int ReadIntBlock (FILE *fp, int n, int *block)
int ReadFloatBlock (FILE *fp, int n, float *block)
int GetNumberOfOutputsInternal (FILE *xyzFp, int verify=1)
int ReadGeometryHeader (FILE *fp)
int ReadQHeader (FILE *fp)
void CalculateFileSize (FILE *fp)
long EstimateSize (int ni, int nj, int nk)
void AssignAttribute (int fNumber, vtkStructuredGrid *output, int attributeType)
void MapFunction (int fNumber, vtkStructuredGrid *output)
void ComputeTemperature (vtkStructuredGrid *output)
void ComputePressure (vtkStructuredGrid *output)
void ComputeEnthalpy (vtkStructuredGrid *output)
void ComputeKineticEnergy (vtkStructuredGrid *output)
void ComputeVelocityMagnitude (vtkStructuredGrid *output)
void ComputeEntropy (vtkStructuredGrid *output)
void ComputeSwirl (vtkStructuredGrid *output)
void ComputeVelocity (vtkStructuredGrid *output)
void ComputeVorticity (vtkStructuredGrid *output)
void ComputePressureGradient (vtkStructuredGrid *output)

Protected Attributes

char * XYZFileName
char * QFileName
int BinaryFile
int HasByteCount
int TwoDimensionalGeometry
int MultiGrid
int ForceRead
int ByteOrder
int IBlanking
int DoNotReduceNumberOfOutputs
long FileSize
float R
float Gamma
float Uvinf
float Vvinf
float Wvinf
vtkIntArrayFunctionList
int ScalarFunctionNumber
int VectorFunctionNumber


Member Typedef Documentation

typedef vtkStructuredGridSource vtkPLOT3DReader::Superclass
 

Reimplemented from vtkStructuredGridSource.

Definition at line 108 of file vtkPLOT3DReader.h.


Member Enumeration Documentation

anonymous enum
 

Enumeration values:
FILE_BIG_ENDIAN 
FILE_LITTLE_ENDIAN 

Definition at line 271 of file vtkPLOT3DReader.h.


Constructor & Destructor Documentation

vtkPLOT3DReader::vtkPLOT3DReader   [protected]
 

vtkPLOT3DReader::~vtkPLOT3DReader   [protected]
 


Member Function Documentation

vtkPLOT3DReader* vtkPLOT3DReader::New   [static]
 

Create an object with Debug turned off, modified time initialized to zero, and reference counting on.

Reimplemented from vtkObject.

virtual const char* vtkPLOT3DReader::GetClassName   [virtual]
 

Reimplemented from vtkStructuredGridSource.

int vtkPLOT3DReader::IsTypeOf const char *    type [static]
 

Return 1 if this class type is the same type of (or a subclass of) the named class. Returns 0 otherwise. This method works in combination with vtkTypeRevisionMacro found in vtkSetGet.h.

Reimplemented from vtkStructuredGridSource.

virtual int vtkPLOT3DReader::IsA const char *    type [virtual]
 

Return 1 if this class is the same type of (or a subclass of) the named class. Returns 0 otherwise. This method works in combination with vtkTypeRevisionMacro found in vtkSetGet.h.

Reimplemented from vtkStructuredGridSource.

vtkPLOT3DReader* vtkPLOT3DReader::SafeDownCast vtkObject   o [static]
 

Reimplemented from vtkStructuredGridSource.

void vtkPLOT3DReader::PrintSelf ostream &    os,
vtkIndent    indent
[virtual]
 

Methods invoked by print to print information about the object including superclasses. Typically not called by the user (use Print() instead) but used in the hierarchical print process to combine the output of several classes.

Reimplemented from vtkStructuredGridSource.

void vtkPLOT3DReader::SetFileName const char *    name [inline]
 

Set/Get the PLOT3D geometry filename.

Definition at line 113 of file vtkPLOT3DReader.h.

const char* vtkPLOT3DReader::GetFileName   [inline]
 

Set/Get the PLOT3D geometry filename.

Definition at line 114 of file vtkPLOT3DReader.h.

virtual void vtkPLOT3DReader::SetXYZFileName const char *    [virtual]
 

Set/Get the PLOT3D geometry filename.

virtual char* vtkPLOT3DReader::GetXYZFileName   [virtual]
 

Set/Get the PLOT3D geometry filename.

virtual void vtkPLOT3DReader::SetQFileName const char *    [virtual]
 

Set/Get the PLOT3D solution filename.

virtual char* vtkPLOT3DReader::GetQFileName   [virtual]
 

Set/Get the PLOT3D solution filename.

int vtkPLOT3DReader::GetNumberOfOutputs   [virtual]
 

This returns the number of outputs this reader will produce. This number is equal to the number of grids in the current file. This method has to be called before getting any output if the number of outputs will be greater than 1 (the first output is always the same). Note that every time this method is invoked, the header file is opened and part of the header is read.

Reimplemented from vtkSource.

int vtkPLOT3DReader::GetNumberOfGrids   [inline]
 

This returns the number of outputs this reader will produce. This number is equal to the number of grids in the current file. This method has to be called before getting any output if the number of outputs will be greater than 1 (the first output is always the same). Note that every time this method is invoked, the header file is opened and part of the header is read.

Definition at line 133 of file vtkPLOT3DReader.h.

References vtkSource::GetNumberOfOutputs().

void vtkPLOT3DReader::SetOutput int    idx,
vtkStructuredGrid   output
 

Replace an output.

virtual void vtkPLOT3DReader::SetBinaryFile int    [virtual]
 

Is the file to be read written in binary format (as opposed to ascii).

virtual int vtkPLOT3DReader::GetBinaryFile   [virtual]
 

Is the file to be read written in binary format (as opposed to ascii).

virtual void vtkPLOT3DReader::BinaryFileOn   [virtual]
 

Is the file to be read written in binary format (as opposed to ascii).

virtual void vtkPLOT3DReader::BinaryFileOff   [virtual]
 

Is the file to be read written in binary format (as opposed to ascii).

virtual void vtkPLOT3DReader::SetMultiGrid int    [virtual]
 

Does the file to be read contain information about number of grids. In some PLOT3D files, the first value contains the number of grids (even if there is only 1). If reading such a file, set this to true.

virtual int vtkPLOT3DReader::GetMultiGrid   [virtual]
 

Does the file to be read contain information about number of grids. In some PLOT3D files, the first value contains the number of grids (even if there is only 1). If reading such a file, set this to true.

virtual void vtkPLOT3DReader::MultiGridOn   [virtual]
 

Does the file to be read contain information about number of grids. In some PLOT3D files, the first value contains the number of grids (even if there is only 1). If reading such a file, set this to true.

virtual void vtkPLOT3DReader::MultiGridOff   [virtual]
 

Does the file to be read contain information about number of grids. In some PLOT3D files, the first value contains the number of grids (even if there is only 1). If reading such a file, set this to true.

virtual void vtkPLOT3DReader::SetHasByteCount int    [virtual]
 

Were the arrays written with leading and trailing byte counts ? Usually, files written by a fortran program will contain these byte counts whereas the ones written by C/C++ won't.

virtual int vtkPLOT3DReader::GetHasByteCount   [virtual]
 

Were the arrays written with leading and trailing byte counts ? Usually, files written by a fortran program will contain these byte counts whereas the ones written by C/C++ won't.

virtual void vtkPLOT3DReader::HasByteCountOn   [virtual]
 

Were the arrays written with leading and trailing byte counts ? Usually, files written by a fortran program will contain these byte counts whereas the ones written by C/C++ won't.

virtual void vtkPLOT3DReader::HasByteCountOff   [virtual]
 

Were the arrays written with leading and trailing byte counts ? Usually, files written by a fortran program will contain these byte counts whereas the ones written by C/C++ won't.

virtual void vtkPLOT3DReader::SetIBlanking int    [virtual]
 

Is there iblanking (point visibility) information in the file. If there is iblanking arrays, these will be read and assigned to the PointVisibility array of the output.

virtual int vtkPLOT3DReader::GetIBlanking   [virtual]
 

Is there iblanking (point visibility) information in the file. If there is iblanking arrays, these will be read and assigned to the PointVisibility array of the output.

virtual void vtkPLOT3DReader::IBlankingOn   [virtual]
 

Is there iblanking (point visibility) information in the file. If there is iblanking arrays, these will be read and assigned to the PointVisibility array of the output.

virtual void vtkPLOT3DReader::IBlankingOff   [virtual]
 

Is there iblanking (point visibility) information in the file. If there is iblanking arrays, these will be read and assigned to the PointVisibility array of the output.

virtual void vtkPLOT3DReader::SetTwoDimensionalGeometry int    [virtual]
 

If only two-dimensional data was written to the file, turn this on.

virtual int vtkPLOT3DReader::GetTwoDimensionalGeometry   [virtual]
 

If only two-dimensional data was written to the file, turn this on.

virtual void vtkPLOT3DReader::TwoDimensionalGeometryOn   [virtual]
 

If only two-dimensional data was written to the file, turn this on.

virtual void vtkPLOT3DReader::TwoDimensionalGeometryOff   [virtual]
 

If only two-dimensional data was written to the file, turn this on.

virtual void vtkPLOT3DReader::SetForceRead int    [virtual]
 

Try to read a binary file even if the file length seems to be inconsistent with the header information. Use this with caution, if the file length is not the same as calculated from the header. either the file is corrupt or the settings are wrong.

virtual int vtkPLOT3DReader::GetForceRead   [virtual]
 

Try to read a binary file even if the file length seems to be inconsistent with the header information. Use this with caution, if the file length is not the same as calculated from the header. either the file is corrupt or the settings are wrong.

virtual void vtkPLOT3DReader::ForceReadOn   [virtual]
 

Try to read a binary file even if the file length seems to be inconsistent with the header information. Use this with caution, if the file length is not the same as calculated from the header. either the file is corrupt or the settings are wrong.

virtual void vtkPLOT3DReader::ForceReadOff   [virtual]
 

Try to read a binary file even if the file length seems to be inconsistent with the header information. Use this with caution, if the file length is not the same as calculated from the header. either the file is corrupt or the settings are wrong.

virtual void vtkPLOT3DReader::SetDoNotReduceNumberOfOutputs int    [virtual]
 

If this is on, the reader will never reduce the number of outputs after reading a file with n grids and producing n outputs. If the file read afterwards contains fewer grids, the extra outputs will be empty. This option can be used by application which rely on the initial number of outputs not shrinking.

virtual int vtkPLOT3DReader::GetDoNotReduceNumberOfOutputs   [virtual]
 

If this is on, the reader will never reduce the number of outputs after reading a file with n grids and producing n outputs. If the file read afterwards contains fewer grids, the extra outputs will be empty. This option can be used by application which rely on the initial number of outputs not shrinking.

virtual void vtkPLOT3DReader::DoNotReduceNumberOfOutputsOn   [virtual]
 

If this is on, the reader will never reduce the number of outputs after reading a file with n grids and producing n outputs. If the file read afterwards contains fewer grids, the extra outputs will be empty. This option can be used by application which rely on the initial number of outputs not shrinking.

virtual void vtkPLOT3DReader::DoNotReduceNumberOfOutputsOff   [virtual]
 

If this is on, the reader will never reduce the number of outputs after reading a file with n grids and producing n outputs. If the file read afterwards contains fewer grids, the extra outputs will be empty. This option can be used by application which rely on the initial number of outputs not shrinking.

void vtkPLOT3DReader::SetByteOrderToBigEndian  
 

Set the byte order of the file (remember, more Unix workstations write big endian whereas PCs write little endian). Default is big endian (since most older PLOT3D files were written by workstations).

void vtkPLOT3DReader::SetByteOrderToLittleEndian  
 

Set the byte order of the file (remember, more Unix workstations write big endian whereas PCs write little endian). Default is big endian (since most older PLOT3D files were written by workstations).

virtual void vtkPLOT3DReader::SetByteOrder int    [virtual]
 

Set the byte order of the file (remember, more Unix workstations write big endian whereas PCs write little endian). Default is big endian (since most older PLOT3D files were written by workstations).

virtual int vtkPLOT3DReader::GetByteOrder   [virtual]
 

Set the byte order of the file (remember, more Unix workstations write big endian whereas PCs write little endian). Default is big endian (since most older PLOT3D files were written by workstations).

const char* vtkPLOT3DReader::GetByteOrderAsString  
 

Set the byte order of the file (remember, more Unix workstations write big endian whereas PCs write little endian). Default is big endian (since most older PLOT3D files were written by workstations).

virtual void vtkPLOT3DReader::SetR float    [virtual]
 

Set/Get the gas constant. Default is 1.0.

virtual float vtkPLOT3DReader::GetR   [virtual]
 

Set/Get the gas constant. Default is 1.0.

virtual void vtkPLOT3DReader::SetGamma float    [virtual]
 

Set/Get the ratio of specific heats. Default is 1.4.

virtual float vtkPLOT3DReader::GetGamma   [virtual]
 

Set/Get the ratio of specific heats. Default is 1.4.

virtual void vtkPLOT3DReader::SetUvinf float    [virtual]
 

Set/Get the x-component of the free-stream velocity. Default is 1.0.

virtual float vtkPLOT3DReader::GetUvinf   [virtual]
 

Set/Get the x-component of the free-stream velocity. Default is 1.0.

virtual void vtkPLOT3DReader::SetVvinf float    [virtual]
 

Set/Get the y-component of the free-stream velocity. Default is 1.0.

virtual float vtkPLOT3DReader::GetVvinf   [virtual]
 

Set/Get the y-component of the free-stream velocity. Default is 1.0.

virtual void vtkPLOT3DReader::SetWvinf float    [virtual]
 

Set/Get the z-component of the free-stream velocity. Default is 1.0.

virtual float vtkPLOT3DReader::GetWvinf   [virtual]
 

Set/Get the z-component of the free-stream velocity. Default is 1.0.

void vtkPLOT3DReader::SetScalarFunctionNumber int    num
 

Specify the scalar function to extract. If ==(-1), then no scalar function is extracted.

virtual int vtkPLOT3DReader::GetScalarFunctionNumber   [virtual]
 

Specify the scalar function to extract. If ==(-1), then no scalar function is extracted.

void vtkPLOT3DReader::SetVectorFunctionNumber int    num
 

Specify the vector function to extract. If ==(-1), then no vector function is extracted.

virtual int vtkPLOT3DReader::GetVectorFunctionNumber   [virtual]
 

Specify the vector function to extract. If ==(-1), then no vector function is extracted.

void vtkPLOT3DReader::AddFunction int    functionNumber
 

Specify additional functions to read. These are placed into the point data as data arrays. Later on they can be used by labeling them as scalars, etc.

void vtkPLOT3DReader::RemoveFunction int   
 

Specify additional functions to read. These are placed into the point data as data arrays. Later on they can be used by labeling them as scalars, etc.

void vtkPLOT3DReader::RemoveAllFunctions  
 

Specify additional functions to read. These are placed into the point data as data arrays. Later on they can be used by labeling them as scalars, etc.

virtual int vtkPLOT3DReader::CanReadFile const char *    fname [virtual]
 

Return 1 if the reader can read the given file name. Only meaningful for binary files.

void vtkPLOT3DReader::ExecuteInformation   [protected, virtual]
 

Reimplemented from vtkSource.

void vtkPLOT3DReader::Execute   [protected, virtual]
 

This method is the old style execute method

Reimplemented from vtkSource.

int vtkPLOT3DReader::CheckFile FILE *&    fp,
const char *    fname
[protected]
 

int vtkPLOT3DReader::CheckGeometryFile FILE *&    xyzFp [protected]
 

int vtkPLOT3DReader::CheckSolutionFile FILE *&    qFp [protected]
 

void vtkPLOT3DReader::SkipByteCount FILE *    fp [protected]
 

int vtkPLOT3DReader::ReadIntBlock FILE *    fp,
int    n,
int *    block
[protected]
 

int vtkPLOT3DReader::ReadFloatBlock FILE *    fp,
int    n,
float *    block
[protected]
 

int vtkPLOT3DReader::GetNumberOfOutputsInternal FILE *    xyzFp,
int    verify = 1
[protected]
 

int vtkPLOT3DReader::ReadGeometryHeader FILE *    fp [protected]
 

int vtkPLOT3DReader::ReadQHeader FILE *    fp [protected]
 

void vtkPLOT3DReader::CalculateFileSize FILE *    fp [protected]
 

long vtkPLOT3DReader::EstimateSize int    ni,
int    nj,
int    nk
[protected]
 

void vtkPLOT3DReader::AssignAttribute int    fNumber,
vtkStructuredGrid   output,
int    attributeType
[protected]
 

void vtkPLOT3DReader::MapFunction int    fNumber,
vtkStructuredGrid   output
[protected]
 

void vtkPLOT3DReader::ComputeTemperature vtkStructuredGrid   output [protected]
 

void vtkPLOT3DReader::ComputePressure vtkStructuredGrid   output [protected]
 

void vtkPLOT3DReader::ComputeEnthalpy vtkStructuredGrid   output [protected]
 

void vtkPLOT3DReader::ComputeKineticEnergy vtkStructuredGrid   output [protected]
 

void vtkPLOT3DReader::ComputeVelocityMagnitude vtkStructuredGrid   output [protected]
 

void vtkPLOT3DReader::ComputeEntropy vtkStructuredGrid   output [protected]
 

void vtkPLOT3DReader::ComputeSwirl vtkStructuredGrid   output [protected]
 

void vtkPLOT3DReader::ComputeVelocity vtkStructuredGrid   output [protected]
 

void vtkPLOT3DReader::ComputeVorticity vtkStructuredGrid   output [protected]
 

void vtkPLOT3DReader::ComputePressureGradient vtkStructuredGrid   output [protected]
 


Member Data Documentation

char* vtkPLOT3DReader::XYZFileName [protected]
 

Definition at line 317 of file vtkPLOT3DReader.h.

char* vtkPLOT3DReader::QFileName [protected]
 

Definition at line 318 of file vtkPLOT3DReader.h.

int vtkPLOT3DReader::BinaryFile [protected]
 

Definition at line 320 of file vtkPLOT3DReader.h.

int vtkPLOT3DReader::HasByteCount [protected]
 

Definition at line 321 of file vtkPLOT3DReader.h.

int vtkPLOT3DReader::TwoDimensionalGeometry [protected]
 

Definition at line 322 of file vtkPLOT3DReader.h.

int vtkPLOT3DReader::MultiGrid [protected]
 

Definition at line 323 of file vtkPLOT3DReader.h.

int vtkPLOT3DReader::ForceRead [protected]
 

Definition at line 324 of file vtkPLOT3DReader.h.

int vtkPLOT3DReader::ByteOrder [protected]
 

Definition at line 325 of file vtkPLOT3DReader.h.

int vtkPLOT3DReader::IBlanking [protected]
 

Definition at line 326 of file vtkPLOT3DReader.h.

int vtkPLOT3DReader::DoNotReduceNumberOfOutputs [protected]
 

Definition at line 327 of file vtkPLOT3DReader.h.

long vtkPLOT3DReader::FileSize [protected]
 

Definition at line 329 of file vtkPLOT3DReader.h.

float vtkPLOT3DReader::R [protected]
 

Definition at line 332 of file vtkPLOT3DReader.h.

float vtkPLOT3DReader::Gamma [protected]
 

Definition at line 333 of file vtkPLOT3DReader.h.

float vtkPLOT3DReader::Uvinf [protected]
 

Definition at line 334 of file vtkPLOT3DReader.h.

float vtkPLOT3DReader::Vvinf [protected]
 

Definition at line 335 of file vtkPLOT3DReader.h.

float vtkPLOT3DReader::Wvinf [protected]
 

Definition at line 336 of file vtkPLOT3DReader.h.

vtkIntArray* vtkPLOT3DReader::FunctionList [protected]
 

Definition at line 339 of file vtkPLOT3DReader.h.

int vtkPLOT3DReader::ScalarFunctionNumber [protected]
 

Definition at line 341 of file vtkPLOT3DReader.h.

int vtkPLOT3DReader::VectorFunctionNumber [protected]
 

Definition at line 342 of file vtkPLOT3DReader.h.


The documentation for this class was generated from the following file: