use a control polyhedron to deform an input vtkPointSet More...

#include <vtkDeformPointSet.h>

Inheritance diagram for vtkDeformPointSet:

Collaboration diagram for vtkDeformPointSet:

Public Member Functions
void	SetControlMeshConnection (vtkAlgorithmOutput *algOutput)
	Specify the point locations used to probe input. More...


void	SetControlMeshData (vtkPolyData *controlMesh)
	Specify the control mesh to deform the input vtkPointSet. More...

vtkPolyData *	GetControlMeshData ()
	Specify the control mesh to deform the input vtkPointSet. More...


virtual void	SetInitializeWeights (vtkTypeBool)
	Specify whether to regenerate interpolation weights or not. More...

virtual vtkTypeBool	GetInitializeWeights ()
	Specify whether to regenerate interpolation weights or not. More...

virtual void	InitializeWeightsOn ()
	Specify whether to regenerate interpolation weights or not. More...

virtual void	InitializeWeightsOff ()
	Specify whether to regenerate interpolation weights or not. More...

Public Member Functions inherited from vtkPointSetAlgorithm
vtkPointSetAlgorithm *	NewInstance () const

vtkPolyData *	GetPolyDataOutput ()
	Get the output as vtkPolyData. More...

vtkStructuredGrid *	GetStructuredGridOutput ()
	Get the output as vtkStructuredGrid. More...

vtkUnstructuredGrid *	GetUnstructuredGridOutput ()
	Get the output as vtkUnstructuredGrid. More...

vtkDataObject *	GetInput ()

vtkTypeBool	ProcessRequest (vtkInformation request, vtkInformationVector inputVector, vtkInformationVector outputVector) override
	see vtkAlgorithm for details More...

vtkPointSet *	GetOutput ()
	Get the output data object for a port on this algorithm. More...

vtkPointSet *	GetOutput (int)
	Get the output data object for a port on this algorithm. More...

void	SetInputData (vtkDataObject *)
	Assign a data object as input. More...

void	SetInputData (int, vtkDataObject *)
	Assign a data object as input. More...

void	SetInputData (vtkPointSet *)
	Assign a data object as input. More...

void	SetInputData (int, vtkPointSet *)
	Assign a data object as input. More...

void	AddInputData (vtkDataObject *)
	Assign a data object as input. More...

void	AddInputData (vtkPointSet *)
	Assign a data object as input. More...

void	AddInputData (int, vtkPointSet *)
	Assign a data object as input. More...

void	AddInputData (int, vtkDataObject *)
	Assign a data object as input. More...

Public Member Functions inherited from vtkAlgorithm
vtkAlgorithm *	NewInstance () const

vtkTypeBool	HasExecutive ()
	Check whether this algorithm has an assigned executive. More...

vtkExecutive *	GetExecutive ()
	Get this algorithm's executive. More...

virtual void	SetExecutive (vtkExecutive *executive)
	Set this algorithm's executive. More...

vtkTypeBool	ProcessRequest (vtkInformation request, vtkCollection inInfo, vtkInformationVector *outInfo)
	Version of ProcessRequest() that is wrapped. More...

virtual int	ComputePipelineMTime (vtkInformation request, vtkInformationVector inInfoVec, vtkInformationVector outInfoVec, int requestFromOutputPort, vtkMTimeType *mtime)
	A special version of ProcessRequest meant specifically for the pipeline modified time request. More...

virtual int	ModifyRequest (vtkInformation *request, int when)
	This method gives the algorithm a chance to modify the contents of a request before or after (specified in the when argument) it is forwarded. More...

vtkInformation *	GetInputPortInformation (int port)
	Get the information object associated with an input port. More...

vtkInformation *	GetOutputPortInformation (int port)
	Get the information object associated with an output port. More...

int	GetNumberOfInputPorts ()
	Get the number of input ports used by the algorithm. More...

int	GetNumberOfOutputPorts ()
	Get the number of output ports provided by the algorithm. More...

void	SetAbortExecuteAndUpdateTime ()
	Set AbortExecute Flag and update LastAbortTime. More...

void	UpdateProgress (double amount)
	Update the progress of the process object. More...

bool	CheckAbort ()
	Checks to see if this filter should abort. More...

virtual void	SetInputArrayToProcess (int idx, int port, int connection, const char fieldAssociation, const char attributeTypeorName)
	String based versions of SetInputArrayToProcess(). More...

vtkInformation *	GetInputArrayInformation (int idx)
	Get the info object for the specified input array to this algorithm. More...

void	RemoveAllInputs ()
	Remove all the input data. More...

vtkDataObject *	GetOutputDataObject (int port)
	Get the data object that will contain the algorithm output for the given port. More...

vtkDataObject *	GetInputDataObject (int port, int connection)
	Get the data object that will contain the algorithm input for the given port and given connection. More...

virtual void	RemoveInputConnection (int port, vtkAlgorithmOutput *input)
	Remove a connection from the given input port index. More...

virtual void	RemoveInputConnection (int port, int idx)
	Remove a connection given by index idx. More...

virtual void	RemoveAllInputConnections (int port)
	Removes all input connections. More...

virtual void	SetInputDataObject (int port, vtkDataObject *data)
	Sets the data-object as an input on the given port index. More...

virtual void	SetInputDataObject (vtkDataObject *data)

virtual void	AddInputDataObject (int port, vtkDataObject *data)
	Add the data-object as an input to this given port. More...

virtual void	AddInputDataObject (vtkDataObject *data)

vtkAlgorithmOutput *	GetOutputPort (int index)
	Get a proxy object corresponding to the given output port of this algorithm. More...

vtkAlgorithmOutput *	GetOutputPort ()

int	GetNumberOfInputConnections (int port)
	Get the number of inputs currently connected to a port. More...

int	GetTotalNumberOfInputConnections ()
	Get the total number of inputs for this algorithm. More...

vtkAlgorithmOutput *	GetInputConnection (int port, int index)
	Get the algorithm output port connected to an input port. More...

vtkAlgorithm *	GetInputAlgorithm (int port, int index, int &algPort)
	Returns the algorithm and the output port index of that algorithm connected to a port-index pair. More...

vtkAlgorithm *	GetInputAlgorithm (int port, int index)
	Returns the algorithm connected to a port-index pair. More...

vtkAlgorithm *	GetInputAlgorithm ()
	Equivalent to GetInputAlgorithm(0, 0). More...

vtkExecutive *	GetInputExecutive (int port, int index)
	Returns the executive associated with a particular input connection. More...

vtkExecutive *	GetInputExecutive ()
	Equivalent to GetInputExecutive(0, 0) More...

vtkInformation *	GetInputInformation (int port, int index)
	Return the information object that is associated with a particular input connection. More...

vtkInformation *	GetInputInformation ()
	Equivalent to GetInputInformation(0, 0) More...

vtkInformation *	GetOutputInformation (int port)
	Return the information object that is associated with a particular output port. More...

virtual vtkTypeBool	Update (int port, vtkInformationVector *requests)
	This method enables the passing of data requests to the algorithm to be used during execution (in addition to bringing a particular port up-to-date). More...

virtual vtkTypeBool	Update (vtkInformation *requests)
	Convenience method to update an algorithm after passing requests to its first output port. More...

virtual int	UpdatePiece (int piece, int numPieces, int ghostLevels, const int extents[6]=nullptr)
	Convenience method to update an algorithm after passing requests to its first output port. More...

virtual int	UpdateExtent (const int extents[6])
	Convenience method to update an algorithm after passing requests to its first output port. More...

virtual int	UpdateTimeStep (double time, int piece=-1, int numPieces=1, int ghostLevels=0, const int extents[6]=nullptr)
	Convenience method to update an algorithm after passing requests to its first output port. More...

virtual void	UpdateInformation ()
	Bring the algorithm's information up-to-date. More...

virtual void	UpdateDataObject ()
	Create output object(s). More...

virtual void	PropagateUpdateExtent ()
	Propagate meta-data upstream. More...

virtual void	UpdateWholeExtent ()
	Bring this algorithm's outputs up-to-date. More...

void	ConvertTotalInputToPortConnection (int ind, int &port, int &conn)
	Convenience routine to convert from a linear ordering of input connections to a port/connection pair. More...

void	RemoveNoPriorTemporalAccessInformationKey ()
	Removes any information key `vtkStreamingDemandDrivenPipeline::NO_PRIOR_TEMPORAL_ACCESS()` to all output ports of this `vtkAlgorithm`. More...

virtual vtkInformation *	GetInformation ()
	Set/Get the information object associated with this algorithm. More...

virtual void	SetInformation (vtkInformation *)
	Set/Get the information object associated with this algorithm. More...

bool	UsesGarbageCollector () const override
	Participate in garbage collection. More...

virtual void	SetAbortExecute (vtkTypeBool)
	Set/Get the AbortExecute flag for the process object. More...

virtual vtkTypeBool	GetAbortExecute ()
	Set/Get the AbortExecute flag for the process object. More...

virtual void	AbortExecuteOn ()
	Set/Get the AbortExecute flag for the process object. More...

virtual void	AbortExecuteOff ()
	Set/Get the AbortExecute flag for the process object. More...

virtual double	GetProgress ()
	Get the execution progress of a process object. More...

void	SetContainerAlgorithm (vtkAlgorithm *containerAlg)
	Set/get a Container algorithm for this algorithm. More...

vtkAlgorithm *	GetContainerAlgorithm ()
	Set/get a Container algorithm for this algorithm. More...

virtual void	SetAbortOutput (bool)
	Set/Get an internal variable used to communicate between the algorithm and executive. More...

virtual bool	GetAbortOutput ()
	Set/Get an internal variable used to communicate between the algorithm and executive. More...

void	SetProgressShiftScale (double shift, double scale)
	Specify the shift and scale values to use to apply to the progress amount when `UpdateProgress` is called. More...

virtual double	GetProgressShift ()
	Specify the shift and scale values to use to apply to the progress amount when `UpdateProgress` is called. More...

virtual double	GetProgressScale ()
	Specify the shift and scale values to use to apply to the progress amount when `UpdateProgress` is called. More...

void	SetProgressText (const char *ptext)
	Set the current text message associated with the progress state. More...

virtual char *	GetProgressText ()
	Set the current text message associated with the progress state. More...

virtual unsigned long	GetErrorCode ()
	The error code contains a possible error that occurred while reading or writing the file. More...

virtual void	SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, const char *name)
	Set the input data arrays that this algorithm will process. More...

virtual void	SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, int fieldAttributeType)
	Set the input data arrays that this algorithm will process. More...

virtual void	SetInputArrayToProcess (int idx, vtkInformation *info)
	Set the input data arrays that this algorithm will process. More...

virtual void	SetInputConnection (int port, vtkAlgorithmOutput *input)
	Set the connection for the given input port index. More...

virtual void	SetInputConnection (vtkAlgorithmOutput *input)
	Set the connection for the given input port index. More...

virtual void	AddInputConnection (int port, vtkAlgorithmOutput *input)
	Add a connection to the given input port index. More...

virtual void	AddInputConnection (vtkAlgorithmOutput *input)
	Add a connection to the given input port index. More...

virtual void	Update (int port)
	Bring this algorithm's outputs up-to-date. More...

virtual void	Update ()
	Bring this algorithm's outputs up-to-date. More...

virtual void	SetReleaseDataFlag (vtkTypeBool)
	Turn release data flag on or off for all output ports. More...

virtual vtkTypeBool	GetReleaseDataFlag ()
	Turn release data flag on or off for all output ports. More...

void	ReleaseDataFlagOn ()
	Turn release data flag on or off for all output ports. More...

void	ReleaseDataFlagOff ()
	Turn release data flag on or off for all output ports. More...

int	UpdateExtentIsEmpty (vtkInformation pinfo, vtkDataObject output)
	This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. More...

int	UpdateExtentIsEmpty (vtkInformation *pinfo, int extentType)
	This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. More...

int *	GetUpdateExtent ()
	These functions return the update extent for output ports that use 3D extents. More...

int *	GetUpdateExtent (int port)
	These functions return the update extent for output ports that use 3D extents. More...

void	GetUpdateExtent (int &x0, int &x1, int &y0, int &y1, int &z0, int &z1)
	These functions return the update extent for output ports that use 3D extents. More...

void	GetUpdateExtent (int port, int &x0, int &x1, int &y0, int &y1, int &z0, int &z1)
	These functions return the update extent for output ports that use 3D extents. More...

void	GetUpdateExtent (int extent[6])
	These functions return the update extent for output ports that use 3D extents. More...

void	GetUpdateExtent (int port, int extent[6])
	These functions return the update extent for output ports that use 3D extents. More...

int	GetUpdatePiece ()
	These functions return the update extent for output ports that use piece extents. More...

int	GetUpdatePiece (int port)
	These functions return the update extent for output ports that use piece extents. More...

int	GetUpdateNumberOfPieces ()
	These functions return the update extent for output ports that use piece extents. More...

int	GetUpdateNumberOfPieces (int port)
	These functions return the update extent for output ports that use piece extents. More...

int	GetUpdateGhostLevel ()
	These functions return the update extent for output ports that use piece extents. More...

int	GetUpdateGhostLevel (int port)
	These functions return the update extent for output ports that use piece extents. More...

void	SetProgressObserver (vtkProgressObserver *)
	If an ProgressObserver is set, the algorithm will report progress through it rather than directly. More...

virtual vtkProgressObserver *	GetProgressObserver ()
	If an ProgressObserver is set, the algorithm will report progress through it rather than directly. More...

void	SetNoPriorTemporalAccessInformationKey (int key)
	Set to all output ports of this algorithm the information key `vtkStreamingDemandDrivenPipeline::NO_PRIOR_TEMPORAL_ACCESS()`. More...

void	SetNoPriorTemporalAccessInformationKey ()
	Set to all output ports of this algorithm the information key `vtkStreamingDemandDrivenPipeline::NO_PRIOR_TEMPORAL_ACCESS()`. More...

Public Member Functions inherited from vtkObject
	vtkBaseTypeMacro (vtkObject, vtkObjectBase)

virtual void	DebugOn ()
	Turn debugging output on. More...

virtual void	DebugOff ()
	Turn debugging output off. More...

bool	GetDebug ()
	Get the value of the debug flag. More...

void	SetDebug (bool debugFlag)
	Set the value of the debug flag. More...

virtual void	Modified ()
	Update the modification time for this object. More...

virtual vtkMTimeType	GetMTime ()
	Return this object's modified time. More...

void	RemoveObserver (unsigned long tag)

void	RemoveObservers (unsigned long event)

void	RemoveObservers (const char *event)

void	RemoveAllObservers ()

vtkTypeBool	HasObserver (unsigned long event)

vtkTypeBool	HasObserver (const char *event)

vtkTypeBool	InvokeEvent (unsigned long event)

vtkTypeBool	InvokeEvent (const char *event)

std::string	GetObjectDescription () const override
	The object description printed in messages and PrintSelf output. More...

unsigned long	AddObserver (unsigned long event, vtkCommand *, float priority=0.0f)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

unsigned long	AddObserver (const char event, vtkCommand , float priority=0.0f)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

vtkCommand *	GetCommand (unsigned long tag)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

void	RemoveObserver (vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

void	RemoveObservers (unsigned long event, vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

void	RemoveObservers (const char event, vtkCommand )
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

vtkTypeBool	HasObserver (unsigned long event, vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

vtkTypeBool	HasObserver (const char event, vtkCommand )
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, void(T::*callback)(), float priority=0.0f)
	Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...

template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, void(T::callback)(vtkObject , unsigned long, void *), float priority=0.0f)
	Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...

template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, bool(T::callback)(vtkObject , unsigned long, void *), float priority=0.0f)
	Allow user to set the AbortFlagOn() with the return value of the callback method. More...

vtkTypeBool	InvokeEvent (unsigned long event, void *callData)
	This method invokes an event and return whether the event was aborted or not. More...

vtkTypeBool	InvokeEvent (const char event, void callData)
	This method invokes an event and return whether the event was aborted or not. More...

virtual void	SetObjectName (const std::string &objectName)
	Set/get the name of this object for reporting purposes. More...

virtual std::string	GetObjectName () const
	Set/get the name of this object for reporting purposes. More...

Public Member Functions inherited from vtkObjectBase
const char *	GetClassName () const
	Return the class name as a string. More...

virtual vtkIdType	GetNumberOfGenerationsFromBase (const char *name)
	Given the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). More...

virtual void	Delete ()
	Delete a VTK object. More...

virtual void	FastDelete ()
	Delete a reference to this object. More...

void	InitializeObjectBase ()

void	Print (ostream &os)
	Print an object to an ostream. More...

void	Register (vtkObjectBase *o)
	Increase the reference count (mark as used by another object). More...

virtual void	UnRegister (vtkObjectBase *o)
	Decrease the reference count (release by another object). More...

int	GetReferenceCount ()
	Return the current reference count of this object. More...

void	SetReferenceCount (int)
	Sets the reference count. More...

bool	GetIsInMemkind () const
	A local state flag that remembers whether this object lives in the normal or extended memory space. More...

virtual void	PrintHeader (ostream &os, vtkIndent indent)
	Methods invoked by print to print information about the object including superclasses. More...

virtual void	PrintTrailer (ostream &os, vtkIndent indent)
	Methods invoked by print to print information about the object including superclasses. More...

Protected Member Functions
	vtkDeformPointSet ()

	~vtkDeformPointSet () override

int	RequestData (vtkInformation , vtkInformationVector , vtkInformationVector ) override
	This is called by the superclass. More...

Protected Member Functions inherited from vtkPointSetAlgorithm
	vtkPointSetAlgorithm ()

	~vtkPointSetAlgorithm () override=default

virtual int	RequestDataObject (vtkInformation request, vtkInformationVector inputVector, vtkInformationVector outputVector)
	This is called by the superclass. More...

virtual int	ExecuteInformation (vtkInformation , vtkInformationVector , vtkInformationVector )
	This is called by the superclass. More...

virtual int	ComputeInputUpdateTime (vtkInformation , vtkInformationVector , vtkInformationVector )

int	FillOutputPortInformation (int port, vtkInformation *info) override
	Fill the output port information objects for this algorithm. More...

int	FillInputPortInformation (int port, vtkInformation *info) override
	Fill the input port information objects for this algorithm. More...

virtual int	ComputeInputUpdateExtent (vtkInformation , vtkInformationVector , vtkInformationVector )
	This is called by the superclass. More...

Protected Member Functions inherited from vtkAlgorithm
	vtkAlgorithm ()

	~vtkAlgorithm () override

bool	CheckUpstreamAbort ()
	Checks to see if an upstream filter has been aborted. More...

virtual void	SetNumberOfInputPorts (int n)
	Set the number of input ports used by the algorithm. More...

virtual void	SetNumberOfOutputPorts (int n)
	Set the number of output ports provided by the algorithm. More...

int	InputPortIndexInRange (int index, const char *action)

int	OutputPortIndexInRange (int index, const char *action)

int	GetInputArrayAssociation (int idx, vtkInformationVector **inputVector)
	Get the association of the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...

vtkInformation *	GetInputArrayFieldInformation (int idx, vtkInformationVector **inputVector)
	This method takes in an index (as specified in SetInputArrayToProcess) and a pipeline information vector. More...

virtual vtkExecutive *	CreateDefaultExecutive ()
	Create a default executive. More...

void	ReportReferences (vtkGarbageCollector *) override

virtual void	SetNthInputConnection (int port, int index, vtkAlgorithmOutput *input)
	Replace the Nth connection on the given input port. More...

virtual void	SetNumberOfInputConnections (int port, int n)
	Set the number of input connections on the given input port. More...

void	SetInputDataInternal (int port, vtkDataObject *input)
	These methods are used by subclasses to implement methods to set data objects directly as input. More...

void	AddInputDataInternal (int port, vtkDataObject *input)

int	GetInputArrayAssociation (int idx, int connection, vtkInformationVector **inputVector)
	Filters that have multiple connections on one port can use this signature. More...

int	GetInputArrayAssociation (int idx, vtkDataObject *input)
	Filters that have multiple connections on one port can use this signature. More...

vtkDataArray *	GetInputArrayToProcess (int idx, vtkInformationVector **inputVector)
	Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...

vtkDataArray *	GetInputArrayToProcess (int idx, vtkInformationVector **inputVector, int &association)
	Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...

vtkDataArray *	GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector)
	Filters that have multiple connections on one port can use this signature. More...

vtkDataArray *	GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association)
	Filters that have multiple connections on one port can use this signature. More...

vtkDataArray *	GetInputArrayToProcess (int idx, vtkDataObject *input)
	Filters that have multiple connections on one port can use this signature. More...

vtkDataArray *	GetInputArrayToProcess (int idx, vtkDataObject *input, int &association)
	Filters that have multiple connections on one port can use this signature. More...

vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector)
	Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...

vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector, int &association)
	Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...

vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector)
	Filters that have multiple connections on one port can use this signature. More...

vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association)
	Filters that have multiple connections on one port can use this signature. More...

vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, vtkDataObject *input)
	Filters that have multiple connections on one port can use this signature. More...

vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, vtkDataObject *input, int &association)
	Filters that have multiple connections on one port can use this signature. More...

virtual void	SetErrorCode (unsigned long)
	The error code contains a possible error that occurred while reading or writing the file. More...

Protected Member Functions inherited from vtkObject
	vtkObject ()

	~vtkObject () override

void	RegisterInternal (vtkObjectBase *, vtkTypeBool check) override

void	UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) override

void	InternalGrabFocus (vtkCommand mouseEvents, vtkCommand keypressEvents=nullptr)
	These methods allow a command to exclusively grab all events. More...

void	InternalReleaseFocus ()
	These methods allow a command to exclusively grab all events. More...

Protected Member Functions inherited from vtkObjectBase
	vtkObjectBase ()

virtual	~vtkObjectBase ()

	vtkObjectBase (const vtkObjectBase &)

void	operator= (const vtkObjectBase &)

Protected Attributes
vtkTypeBool	InitializeWeights

vtkIdType	InitialNumberOfControlMeshPoints

vtkIdType	InitialNumberOfControlMeshCells

vtkIdType	InitialNumberOfPointSetPoints

vtkIdType	InitialNumberOfPointSetCells

vtkSmartPointer< vtkDoubleArray >	Weights

Protected Attributes inherited from vtkAlgorithm
vtkTimeStamp	LastAbortCheckTime

vtkInformation *	Information

double	Progress

char *	ProgressText

vtkProgressObserver *	ProgressObserver

unsigned long	ErrorCode
	The error code contains a possible error that occurred while reading or writing the file. More...

Protected Attributes inherited from vtkObject
bool	Debug

vtkTimeStamp	MTime

vtkSubjectHelper *	SubjectHelper

std::string	ObjectName

Protected Attributes inherited from vtkObjectBase
std::atomic< int32_t >	ReferenceCount

vtkWeakPointerBase **	WeakPointers

typedef vtkPointSetAlgorithm	Superclass
	Standard methods for instantiable (i.e., concrete) class. More...

static vtkDeformPointSet *	New ()
	Standard methods for instantiable (i.e., concrete) class. More...

static vtkTypeBool	IsTypeOf (const char *type)
	Standard methods for instantiable (i.e., concrete) class. More...

static vtkDeformPointSet *	SafeDownCast (vtkObjectBase *o)
	Standard methods for instantiable (i.e., concrete) class. More...

virtual vtkTypeBool	IsA (const char *type)
	Standard methods for instantiable (i.e., concrete) class. More...

vtkDeformPointSet *	NewInstance () const
	Standard methods for instantiable (i.e., concrete) class. More...

void	PrintSelf (ostream &os, vtkIndent indent) override
	Standard methods for instantiable (i.e., concrete) class. More...

virtual vtkObjectBase *	NewInstanceInternal () const
	Standard methods for instantiable (i.e., concrete) class. More...

Additional Inherited Members
Public Types inherited from vtkPointSetAlgorithm
typedef vtkAlgorithm	Superclass

Public Types inherited from vtkAlgorithm
enum	DesiredOutputPrecision { SINGLE_PRECISION , DOUBLE_PRECISION , DEFAULT_PRECISION }
	Values used for setting the desired output precision for various algorithms. More...

typedef vtkObject	Superclass

Static Public Member Functions inherited from vtkPointSetAlgorithm
static vtkPointSetAlgorithm *	New ()

static vtkTypeBool	IsTypeOf (const char *type)

static vtkPointSetAlgorithm *	SafeDownCast (vtkObjectBase *o)

Static Public Member Functions inherited from vtkAlgorithm
static vtkAlgorithm *	New ()

static vtkTypeBool	IsTypeOf (const char *type)

static vtkAlgorithm *	SafeDownCast (vtkObjectBase *o)

static vtkInformationIntegerKey *	INPUT_IS_OPTIONAL ()
	Keys used to specify input port requirements. More...

static vtkInformationIntegerKey *	INPUT_IS_REPEATABLE ()

static vtkInformationInformationVectorKey *	INPUT_REQUIRED_FIELDS ()

static vtkInformationStringVectorKey *	INPUT_REQUIRED_DATA_TYPE ()

static vtkInformationInformationVectorKey *	INPUT_ARRAYS_TO_PROCESS ()

static vtkInformationIntegerKey *	INPUT_PORT ()

static vtkInformationIntegerKey *	INPUT_CONNECTION ()

static vtkInformationIntegerKey *	CAN_PRODUCE_SUB_EXTENT ()
	This key tells the executive that a particular output port is capable of producing an arbitrary subextent of the whole extent. More...

static vtkInformationIntegerKey *	CAN_HANDLE_PIECE_REQUEST ()
	Key that tells the pipeline that a particular algorithm can or cannot handle piece request. More...

static vtkInformationIntegerKey *	ABORTED ()

static void	SetDefaultExecutivePrototype (vtkExecutive *proto)
	If the DefaultExecutivePrototype is set, a copy of it is created in CreateDefaultExecutive() using NewInstance(). More...

Static Public Member Functions inherited from vtkObject
static vtkObject *	New ()
	Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More...

static void	BreakOnError ()
	This method is called when vtkErrorMacro executes. More...

static void	SetGlobalWarningDisplay (vtkTypeBool val)
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

static void	GlobalWarningDisplayOn ()
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

static void	GlobalWarningDisplayOff ()
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

static vtkTypeBool	GetGlobalWarningDisplay ()
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

Static Public Member Functions inherited from vtkObjectBase
static vtkTypeBool	IsTypeOf (const char *name)
	Return 1 if this class type is the same type of (or a subclass of) the named class. More...

static vtkIdType	GetNumberOfGenerationsFromBaseType (const char *name)
	Given a the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). More...

static vtkObjectBase *	New ()
	Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More...

static void	SetMemkindDirectory (const char *directoryname)
	The name of a directory, ideally mounted -o dax, to memory map an extended memory space within. More...

static bool	GetUsingMemkind ()
	A global state flag that controls whether vtkObjects are constructed in the usual way (the default) or within the extended memory space. More...

Public Attributes inherited from vtkAlgorithm
std::atomic< vtkTypeBool >	AbortExecute

Static Protected Member Functions inherited from vtkAlgorithm
static vtkInformationIntegerKey *	PORT_REQUIREMENTS_FILLED ()

Static Protected Member Functions inherited from vtkObjectBase
static vtkMallocingFunction	GetCurrentMallocFunction ()

static vtkReallocingFunction	GetCurrentReallocFunction ()

static vtkFreeingFunction	GetCurrentFreeFunction ()

static vtkFreeingFunction	GetAlternateFreeFunction ()

Static Protected Attributes inherited from vtkAlgorithm
static vtkTimeStamp	LastAbortTime

static vtkExecutive *	DefaultExecutivePrototype

Detailed Description

use a control polyhedron to deform an input vtkPointSet

vtkDeformPointSet is a filter that uses a control polyhdron to deform an input dataset of type vtkPointSet. The control polyhedron (or mesh) must be a closed, manifold surface.

The filter executes as follows. In initial pipeline execution, the control mesh and input vtkPointSet are assumed in undeformed position, and an initial set of interpolation weights are computed for each point in the vtkPointSet (one interpolation weight value for each point in the control mesh). The filter then stores these interpolation weights after filter execution. The next time the filter executes, assuming that the number of points/cells in the control mesh and vtkPointSet have not changed, the points in the vtkPointSet are recomputed based on the original weights. Hence if the control mesh has been deformed, it will in turn cause deformation in the vtkPointSet. This can be used to animate or edit the geometry of the vtkPointSet.

Warning: Note that a set of interpolation weights per point in the vtkPointSet is maintained. The number of interpolation weights is the number of points in the control mesh. Hence keep the control mesh small in size or a n^2 data explostion will occur.; The filter maintains interpolation weights between executions (after the initial execution pass computes the interpolation weights). You can explicitly cause the filter to reinitialize by setting the InitializeWeights boolean to true. By default, the filter will execute and then set InitializeWeights to false.; This work was motivated by the work of Tao Ju et al in "Mesh Value Coordinates for Closed Triangular Meshes." The MVC algorithm is currently used to generate interpolation weights. However, in the future this filter may be extended to provide other interpolation functions.; A final note: point data and cell data are passed from the input to the output. Only the point coordinates of the input vtkPointSet are modified.

See also: vtkMeanValueCoordinatesInterpolator vtkProbePolyhedron vtkPolyhedron

Online Examples:

DeformPointSet

Tests:: vtkDeformPointSet (Tests)

Definition at line 84 of file vtkDeformPointSet.h.

Member Typedef Documentation

◆ Superclass

typedef vtkPointSetAlgorithm vtkDeformPointSet::Superclass

Standard methods for instantiable (i.e., concrete) class.

Definition at line 92 of file vtkDeformPointSet.h.

Constructor & Destructor Documentation

◆ vtkDeformPointSet()

vtkDeformPointSet::vtkDeformPointSet ( )

protected

◆ ~vtkDeformPointSet()

vtkDeformPointSet::~vtkDeformPointSet ( )

overrideprotected

Member Function Documentation

◆ New()

static vtkDeformPointSet* vtkDeformPointSet::New ( )

static

Standard methods for instantiable (i.e., concrete) class.

◆ IsTypeOf()

static vtkTypeBool vtkDeformPointSet::IsTypeOf ( const char * type )

static

Standard methods for instantiable (i.e., concrete) class.

◆ IsA()

virtual vtkTypeBool vtkDeformPointSet::IsA ( const char * type )

virtual

Standard methods for instantiable (i.e., concrete) class.

Reimplemented from vtkPointSetAlgorithm.

◆ SafeDownCast()

static vtkDeformPointSet* vtkDeformPointSet::SafeDownCast ( vtkObjectBase * o )

static

Standard methods for instantiable (i.e., concrete) class.

◆ NewInstanceInternal()

virtual vtkObjectBase* vtkDeformPointSet::NewInstanceInternal ( ) const

protectedvirtual

Standard methods for instantiable (i.e., concrete) class.

Reimplemented from vtkPointSetAlgorithm.

◆ NewInstance()

vtkDeformPointSet* vtkDeformPointSet::NewInstance ( ) const

Standard methods for instantiable (i.e., concrete) class.

◆ PrintSelf()

void vtkDeformPointSet::PrintSelf	(	ostream &	os,
		vtkIndent	indent
	)

overridevirtual

Standard methods for instantiable (i.e., concrete) class.

Reimplemented from vtkPointSetAlgorithm.

◆ SetControlMeshData()

void vtkDeformPointSet::SetControlMeshData ( vtkPolyData * controlMesh )

Specify the control mesh to deform the input vtkPointSet.

The control mesh must be a closed, non-self-intersecting, manifold mesh.

◆ GetControlMeshData()

vtkPolyData* vtkDeformPointSet::GetControlMeshData ( )

Specify the control mesh to deform the input vtkPointSet.

The control mesh must be a closed, non-self-intersecting, manifold mesh.

◆ SetControlMeshConnection()

void vtkDeformPointSet::SetControlMeshConnection ( vtkAlgorithmOutput * algOutput )

Specify the point locations used to probe input.

Any geometry can be used. New style. Equivalent to SetInputConnection(1, algOutput).

◆ SetInitializeWeights()

virtual void vtkDeformPointSet::SetInitializeWeights ( vtkTypeBool )

virtual

Specify whether to regenerate interpolation weights or not.

Initially the filter will reexecute no matter what this flag is set to (initial weights must be computed). Also, this flag is ignored if the number of input points/cells or the number of control mesh points/cells changes between executions. Thus flag is used to force reexecution and recomputation of weights.

◆ GetInitializeWeights()

virtual vtkTypeBool vtkDeformPointSet::GetInitializeWeights ( )

virtual

Specify whether to regenerate interpolation weights or not.

Initially the filter will reexecute no matter what this flag is set to (initial weights must be computed). Also, this flag is ignored if the number of input points/cells or the number of control mesh points/cells changes between executions. Thus flag is used to force reexecution and recomputation of weights.

◆ InitializeWeightsOn()

virtual void vtkDeformPointSet::InitializeWeightsOn ( )

virtual

Specify whether to regenerate interpolation weights or not.

Initially the filter will reexecute no matter what this flag is set to (initial weights must be computed). Also, this flag is ignored if the number of input points/cells or the number of control mesh points/cells changes between executions. Thus flag is used to force reexecution and recomputation of weights.

◆ InitializeWeightsOff()

virtual void vtkDeformPointSet::InitializeWeightsOff ( )

virtual

Specify whether to regenerate interpolation weights or not.

Initially the filter will reexecute no matter what this flag is set to (initial weights must be computed). Also, this flag is ignored if the number of input points/cells or the number of control mesh points/cells changes between executions. Thus flag is used to force reexecution and recomputation of weights.

◆ RequestData()

int vtkDeformPointSet::RequestData	(	vtkInformation *	,
		vtkInformationVector **	,
		vtkInformationVector *
	)

overrideprotectedvirtual

This is called by the superclass.

This is the method you should override.

Reimplemented from vtkPointSetAlgorithm.

Member Data Documentation

◆ InitializeWeights

vtkTypeBool vtkDeformPointSet::InitializeWeights

protected

Definition at line 129 of file vtkDeformPointSet.h.

◆ InitialNumberOfControlMeshPoints

vtkIdType vtkDeformPointSet::InitialNumberOfControlMeshPoints

protected

Definition at line 132 of file vtkDeformPointSet.h.

◆ InitialNumberOfControlMeshCells

vtkIdType vtkDeformPointSet::InitialNumberOfControlMeshCells

protected

Definition at line 133 of file vtkDeformPointSet.h.

◆ InitialNumberOfPointSetPoints

vtkIdType vtkDeformPointSet::InitialNumberOfPointSetPoints

protected

Definition at line 134 of file vtkDeformPointSet.h.

◆ InitialNumberOfPointSetCells

vtkIdType vtkDeformPointSet::InitialNumberOfPointSetCells

protected

Definition at line 135 of file vtkDeformPointSet.h.

◆ Weights

vtkSmartPointer<vtkDoubleArray> vtkDeformPointSet::Weights

protected

Definition at line 136 of file vtkDeformPointSet.h.

The documentation for this class was generated from the following file:

Filters/General/vtkDeformPointSet.h

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Member Typedef Documentation

◆ Superclass

Constructor & Destructor Documentation

◆ vtkDeformPointSet()

◆ ~vtkDeformPointSet()

Member Function Documentation

◆ New()

◆ IsTypeOf()

◆ IsA()

◆ SafeDownCast()

◆ NewInstanceInternal()

◆ NewInstance()

◆ PrintSelf()

◆ SetControlMeshData()

◆ GetControlMeshData()

◆ SetControlMeshConnection()

◆ SetInitializeWeights()

◆ GetInitializeWeights()

◆ InitializeWeightsOn()

◆ InitializeWeightsOff()

◆ RequestData()

Member Data Documentation

◆ InitializeWeights

◆ InitialNumberOfControlMeshPoints

◆ InitialNumberOfControlMeshCells

◆ InitialNumberOfPointSetPoints

◆ InitialNumberOfPointSetCells

◆ Weights