vtkPStreamTracer Class Reference

parallel streamline generators More...

#include <vtkPStreamTracer.h>

Inheritance diagram for vtkPStreamTracer:

Collaboration diagram for vtkPStreamTracer:

Public Member Functions
virtual void	SetController (vtkMultiProcessController *controller)
	Set/Get the controller use in compositing (set to the global controller by default) If not using the default, this must be called before any other methods.
virtual vtkMultiProcessController *	GetController ()
	Set/Get the controller use in compositing (set to the global controller by default) If not using the default, this must be called before any other methods.
Public Member Functions inherited from vtkStreamTracer
void	SetSourceConnection (vtkAlgorithmOutput *algOutput)
	Specify the source object used to generate starting points (seeds).
void	SetInterpolatorTypeToDataSetPointLocator ()
	Set the velocity field interpolator type to one that uses a point locator to perform local spatial searching.
void	SetInterpolatorTypeToCellLocator ()
	Set the velocity field interpolator type to one that uses a cell locator to perform spatial searching.
void	SetIntegrationStepUnit (int unit)
	Specify a uniform integration step unit for MinimumIntegrationStep, InitialIntegrationStep, and MaximumIntegrationStep.
int	GetIntegrationStepUnit ()
void	SetInterpolatorPrototype (vtkAbstractInterpolatedVelocityField *ivf)
	The object used to interpolate the velocity field during integration is of the same class as this prototype.
void	SetInterpolatorType (int interpType)
	Set the type of the velocity field interpolator to determine whether INTERPOLATOR_WITH_DATASET_POINT_LOCATOR or INTERPOLATOR_WITH_CELL_LOCATOR is employed for locating cells during streamline integration.
void	AddCustomTerminationCallback (CustomTerminationCallbackType callback, void *clientdata, int reasonForTermination)
	Adds a custom termination callback.
void	ConvertIntervals (double &step, double &minStep, double &maxStep, int direction, double cellLength)
	The following methods should not be called by the user.
virtual void	SetStartPosition (double, double, double)
	Specify the starting point (seed) of a streamline in the global coordinate system.
virtual void	SetStartPosition (double[3])
	Specify the starting point (seed) of a streamline in the global coordinate system.
virtual double *	GetStartPosition ()
	Specify the starting point (seed) of a streamline in the global coordinate system.
virtual void	GetStartPosition (double &, double &, double &)
	Specify the starting point (seed) of a streamline in the global coordinate system.
virtual void	GetStartPosition (double[3])
	Specify the starting point (seed) of a streamline in the global coordinate system.
void	SetSourceData (vtkDataSet *source)
	Specify the source object used to generate starting points (seeds).
vtkDataSet *	GetSource ()
	Specify the source object used to generate starting points (seeds).
void	SetIntegrator (vtkInitialValueProblemSolver *)
	Set/get the integrator type to be used for streamline generation.
virtual vtkInitialValueProblemSolver *	GetIntegrator ()
	Set/get the integrator type to be used for streamline generation.
void	SetIntegratorType (int type)
	Set/get the integrator type to be used for streamline generation.
int	GetIntegratorType ()
	Set/get the integrator type to be used for streamline generation.
void	SetIntegratorTypeToRungeKutta2 ()
	Set/get the integrator type to be used for streamline generation.
void	SetIntegratorTypeToRungeKutta4 ()
	Set/get the integrator type to be used for streamline generation.
void	SetIntegratorTypeToRungeKutta45 ()
	Set/get the integrator type to be used for streamline generation.
virtual void	SetMaximumPropagation (double)
	Specify the maximum length of a streamline expressed in LENGTH_UNIT.
virtual double	GetMaximumPropagation ()
	Specify the maximum length of a streamline expressed in LENGTH_UNIT.
virtual void	SetInitialIntegrationStep (double)
	Specify the Initial step size used for line integration, expressed in: LENGTH_UNIT = 1 CELL_LENGTH_UNIT = 2 (either the starting size for an adaptive integrator, e.g., RK45, or the constant / fixed size for non-adaptive ones, i.e., RK2 and RK4)
virtual double	GetInitialIntegrationStep ()
	Specify the Initial step size used for line integration, expressed in: LENGTH_UNIT = 1 CELL_LENGTH_UNIT = 2 (either the starting size for an adaptive integrator, e.g., RK45, or the constant / fixed size for non-adaptive ones, i.e., RK2 and RK4)
virtual void	SetMinimumIntegrationStep (double)
	Specify the Minimum step size used for line integration, expressed in: LENGTH_UNIT = 1 CELL_LENGTH_UNIT = 2 (Only valid for an adaptive integrator, e.g., RK45)
virtual double	GetMinimumIntegrationStep ()
	Specify the Minimum step size used for line integration, expressed in: LENGTH_UNIT = 1 CELL_LENGTH_UNIT = 2 (Only valid for an adaptive integrator, e.g., RK45)
virtual void	SetMaximumIntegrationStep (double)
	Specify the Maximum step size used for line integration, expressed in: LENGTH_UNIT = 1 CELL_LENGTH_UNIT = 2 (Only valid for an adaptive integrator, e.g., RK45)
virtual double	GetMaximumIntegrationStep ()
	Specify the Maximum step size used for line integration, expressed in: LENGTH_UNIT = 1 CELL_LENGTH_UNIT = 2 (Only valid for an adaptive integrator, e.g., RK45)
virtual void	SetMaximumError (double)
	Specify the maximum error tolerated throughout streamline integration.
virtual double	GetMaximumError ()
	Specify the maximum error tolerated throughout streamline integration.
virtual void	SetMaximumNumberOfSteps (vtkIdType)
	Specify the maximum number of steps for integrating a streamline.
virtual vtkIdType	GetMaximumNumberOfSteps ()
	Specify the maximum number of steps for integrating a streamline.
virtual void	SetTerminalSpeed (double)
	Specify the terminal speed value, below which streamline integration is terminated.
virtual double	GetTerminalSpeed ()
	Specify the terminal speed value, below which streamline integration is terminated.
virtual bool	GetSurfaceStreamlines ()
	Specify whether streamlines should be computed on a surface.
virtual void	SetSurfaceStreamlines (bool)
	Specify whether streamlines should be computed on a surface.
virtual void	SurfaceStreamlinesOn ()
	Specify whether streamlines should be computed on a surface.
virtual void	SurfaceStreamlinesOff ()
	Specify whether streamlines should be computed on a surface.
virtual void	SetIntegrationDirection (int)
	Specify whether the streamline is integrated in the upstream or downstream direction, or in both directions.
virtual int	GetIntegrationDirection ()
	Specify whether the streamline is integrated in the upstream or downstream direction, or in both directions.
void	SetIntegrationDirectionToForward ()
	Specify whether the streamline is integrated in the upstream or downstream direction, or in both directions.
void	SetIntegrationDirectionToBackward ()
	Specify whether the streamline is integrated in the upstream or downstream direction, or in both directions.
void	SetIntegrationDirectionToBoth ()
	Specify whether the streamline is integrated in the upstream or downstream direction, or in both directions.
virtual void	SetComputeVorticity (bool)
	Turn on/off vorticity computation at streamline points (necessary for generating proper stream-ribbons using the vtkRibbonFilter).
virtual bool	GetComputeVorticity ()
	Turn on/off vorticity computation at streamline points (necessary for generating proper stream-ribbons using the vtkRibbonFilter).
virtual void	SetRotationScale (double)
	This can be used to scale the rate with which the streamribbons twist.
virtual double	GetRotationScale ()
	This can be used to scale the rate with which the streamribbons twist.
virtual bool	GetForceSerialExecution ()
	Force the filter to run stream tracer advection in serial.
virtual void	SetForceSerialExecution (bool)
	Force the filter to run stream tracer advection in serial.
virtual void	ForceSerialExecutionOn ()
	Force the filter to run stream tracer advection in serial.
virtual void	ForceSerialExecutionOff ()
	Force the filter to run stream tracer advection in serial.
void	GenerateNormals (vtkPolyData *output, double *firstNormal, const char *vecName)
	Helper methods to generate normals on streamlines.
void	CalculateVorticity (vtkGenericCell *cell, double pcoords[3], vtkDoubleArray *cellVectors, double vorticity[3])
	Helper methods to generate normals on streamlines.
virtual void	SetUseLocalSeedSource (bool)
	If true the filter considers that the whole seed source is available on all ranks.
virtual bool	GetUseLocalSeedSource ()
	If true the filter considers that the whole seed source is available on all ranks.
virtual void	UseLocalSeedSourceOn ()
	If true the filter considers that the whole seed source is available on all ranks.
virtual void	UseLocalSeedSourceOff ()
	If true the filter considers that the whole seed source is available on all ranks.
vtkStreamTracer *	NewInstance () const
	Standard methods to obtain type information and print object state.
void	PrintSelf (ostream &os, vtkIndent indent) override
	Standard methods to obtain type information and print object state.
Public Member Functions inherited from vtkPolyDataAlgorithm
virtual vtkTypeBool	IsA (const char *type)
	Return 1 if this class is the same type of (or a subclass of) the named class.
vtkPolyDataAlgorithm *	NewInstance () const
void	PrintSelf (ostream &os, vtkIndent indent) override
	Methods invoked by print to print information about the object including superclasses.
vtkTypeBool	ProcessRequest (vtkInformation *, vtkInformationVector **, vtkInformationVector *) override
	see vtkAlgorithm for details
vtkDataObject *	GetInput ()
vtkDataObject *	GetInput (int port)
vtkPolyData *	GetPolyDataInput (int port)
vtkPolyData *	GetOutput ()
	Get the output data object for a port on this algorithm.
vtkPolyData *	GetOutput (int)
	Get the output data object for a port on this algorithm.
virtual void	SetOutput (vtkDataObject *d)
	Get the output data object for a port on this algorithm.
void	SetInputData (vtkDataObject *)
	Assign a data object as input.
void	SetInputData (int, vtkDataObject *)
	Assign a data object as input.
void	AddInputData (vtkDataObject *)
	Assign a data object as input.
void	AddInputData (int, vtkDataObject *)
	Assign a data object as input.
Public Member Functions inherited from vtkAlgorithm
virtual vtkTypeBool	IsA (const char *type)
	Return 1 if this class is the same type of (or a subclass of) the named class.
vtkAlgorithm *	NewInstance () const
void	PrintSelf (ostream &os, vtkIndent indent) override
	Methods invoked by print to print information about the object including superclasses.
vtkTypeBool	HasExecutive ()
	Check whether this algorithm has an assigned executive.
vtkExecutive *	GetExecutive ()
	Get this algorithm's executive.
virtual void	SetExecutive (vtkExecutive *executive)
	Set this algorithm's executive.
virtual vtkTypeBool	ProcessRequest (vtkInformation *request, vtkInformationVector **inInfo, vtkInformationVector *outInfo)
	Upstream/Downstream requests form the generalized interface through which executives invoke a algorithm's functionality.
vtkTypeBool	ProcessRequest (vtkInformation *request, vtkCollection *inInfo, vtkInformationVector *outInfo)
	Version of ProcessRequest() that is wrapped.
virtual int	ComputePipelineMTime (vtkInformation *request, vtkInformationVector **inInfoVec, vtkInformationVector *outInfoVec, int requestFromOutputPort, vtkMTimeType *mtime)
	A special version of ProcessRequest meant specifically for the pipeline modified time request.
virtual int	ModifyRequest (vtkInformation *request, int when)
	This method gives the algorithm a chance to modify the contents of a request before or after (specified in the when argument) it is forwarded.
vtkInformation *	GetInputPortInformation (int port)
	Get the information object associated with an input port.
vtkInformation *	GetOutputPortInformation (int port)
	Get the information object associated with an output port.
int	GetNumberOfInputPorts ()
	Get the number of input ports used by the algorithm.
int	GetNumberOfOutputPorts ()
	Get the number of output ports provided by the algorithm.
void	SetAbortExecuteAndUpdateTime ()
	Set AbortExecute Flag and update LastAbortTime.
void	UpdateProgress (double amount)
	Update the progress of the process object.
bool	CheckAbort ()
	Checks to see if this filter should abort.
vtkInformation *	GetInputArrayInformation (int idx)
	Get the info object for the specified input array to this algorithm.
void	RemoveAllInputs ()
	Remove all the input data.
vtkDataObject *	GetOutputDataObject (int port)
	Get the data object that will contain the algorithm output for the given port.
vtkDataObject *	GetInputDataObject (int port, int connection)
	Get the data object that will contain the algorithm input for the given port and given connection.
virtual void	RemoveInputConnection (int port, vtkAlgorithmOutput *input)
	Remove a connection from the given input port index.
virtual void	RemoveInputConnection (int port, int idx)
	Remove a connection given by index idx.
virtual void	RemoveAllInputConnections (int port)
	Removes all input connections.
virtual void	SetInputDataObject (int port, vtkDataObject *data)
	Sets the data-object as an input on the given port index.
virtual void	SetInputDataObject (vtkDataObject *data)
virtual void	AddInputDataObject (int port, vtkDataObject *data)
	Add the data-object as an input to this given port.
virtual void	AddInputDataObject (vtkDataObject *data)
vtkAlgorithmOutput *	GetOutputPort (int index)
	Get a proxy object corresponding to the given output port of this algorithm.
vtkAlgorithmOutput *	GetOutputPort ()
int	GetNumberOfInputConnections (int port)
	Get the number of inputs currently connected to a port.
int	GetTotalNumberOfInputConnections ()
	Get the total number of inputs for this algorithm.
vtkAlgorithmOutput *	GetInputConnection (int port, int index)
	Get the algorithm output port connected to an input port.
vtkAlgorithm *	GetInputAlgorithm (int port, int index, int &algPort)
	Returns the algorithm and the output port index of that algorithm connected to a port-index pair.
vtkAlgorithm *	GetInputAlgorithm (int port, int index)
	Returns the algorithm connected to a port-index pair.
vtkAlgorithm *	GetInputAlgorithm ()
	Equivalent to GetInputAlgorithm(0, 0).
vtkExecutive *	GetInputExecutive (int port, int index)
	Returns the executive associated with a particular input connection.
vtkExecutive *	GetInputExecutive ()
	Equivalent to GetInputExecutive(0, 0)
vtkInformation *	GetInputInformation (int port, int index)
	Return the information object that is associated with a particular input connection.
vtkInformation *	GetInputInformation ()
	Equivalent to GetInputInformation(0, 0)
vtkInformation *	GetOutputInformation (int port)
	Return the information object that is associated with a particular output port.
virtual vtkTypeBool	Update (int port, vtkInformationVector *requests)
	This method enables the passing of data requests to the algorithm to be used during execution (in addition to bringing a particular port up-to-date).
virtual vtkTypeBool	Update (vtkInformation *requests)
	Convenience method to update an algorithm after passing requests to its first output port.
virtual int	UpdatePiece (int piece, int numPieces, int ghostLevels, const int extents[6]=nullptr)
	Convenience method to update an algorithm after passing requests to its first output port.
virtual VTK_UNBLOCKTHREADS int	UpdateExtent (const int extents[6])
	Convenience method to update an algorithm after passing requests to its first output port.
virtual VTK_UNBLOCKTHREADS int	UpdateTimeStep (double time, int piece=-1, int numPieces=1, int ghostLevels=0, const int extents[6]=nullptr)
	Convenience method to update an algorithm after passing requests to its first output port.
virtual VTK_UNBLOCKTHREADS void	UpdateInformation ()
	Bring the algorithm's information up-to-date.
virtual void	UpdateDataObject ()
	Create output object(s).
virtual void	PropagateUpdateExtent ()
	Propagate meta-data upstream.
virtual VTK_UNBLOCKTHREADS void	UpdateWholeExtent ()
	Bring this algorithm's outputs up-to-date.
void	ConvertTotalInputToPortConnection (int ind, int &port, int &conn)
	Convenience routine to convert from a linear ordering of input connections to a port/connection pair.
void	RemoveNoPriorTemporalAccessInformationKey ()
	Removes any information key vtkStreamingDemandDrivenPipeline::NO_PRIOR_TEMPORAL_ACCESS() to all output ports of this vtkAlgorithm.
virtual vtkInformation *	GetInformation ()
	Set/Get the information object associated with this algorithm.
virtual void	SetInformation (vtkInformation *)
	Set/Get the information object associated with this algorithm.
bool	UsesGarbageCollector () const override
	Participate in garbage collection.
virtual void	SetAbortExecute (vtkTypeBool)
	Set/Get the AbortExecute flag for the process object.
virtual vtkTypeBool	GetAbortExecute ()
	Set/Get the AbortExecute flag for the process object.
virtual void	AbortExecuteOn ()
	Set/Get the AbortExecute flag for the process object.
virtual void	AbortExecuteOff ()
	Set/Get the AbortExecute flag for the process object.
virtual double	GetProgress ()
	Get the execution progress of a process object.
void	SetContainerAlgorithm (vtkAlgorithm *containerAlg)
	Set/get a Container algorithm for this algorithm.
vtkAlgorithm *	GetContainerAlgorithm ()
	Set/get a Container algorithm for this algorithm.
virtual void	SetAbortOutput (bool)
	Set/Get an internal variable used to communicate between the algorithm and executive.
virtual bool	GetAbortOutput ()
	Set/Get an internal variable used to communicate between the algorithm and executive.
void	SetProgressShiftScale (double shift, double scale)
	Specify the shift and scale values to use to apply to the progress amount when UpdateProgress is called.
virtual double	GetProgressShift ()
	Specify the shift and scale values to use to apply to the progress amount when UpdateProgress is called.
virtual double	GetProgressScale ()
	Specify the shift and scale values to use to apply to the progress amount when UpdateProgress is called.
void	SetProgressText (const char *ptext)
	Set the current text message associated with the progress state.
virtual char *	GetProgressText ()
	Set the current text message associated with the progress state.
virtual unsigned long	GetErrorCode ()
	The error code contains a possible error that occurred while reading or writing the file.
void	SetInputArrayToProcess (const char *name, int fieldAssociation)
	Set the input data arrays that this algorithm will process.
virtual void	SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, const char *name)
	Set the input data arrays that this algorithm will process.
virtual void	SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, int fieldAttributeType)
	Set the input data arrays that this algorithm will process.
virtual void	SetInputArrayToProcess (int idx, vtkInformation *info)
	Set the input data arrays that this algorithm will process.
virtual void	SetInputArrayToProcess (int idx, int port, int connection, const char *fieldAssociation, const char *attributeTypeorName)
	Set the input data arrays that this algorithm will process.
virtual void	SetInputConnection (int port, vtkAlgorithmOutput *input)
	Set the connection for the given input port index.
virtual void	SetInputConnection (vtkAlgorithmOutput *input)
	Set the connection for the given input port index.
virtual void	AddInputConnection (int port, vtkAlgorithmOutput *input)
	Add a connection to the given input port index.
virtual void	AddInputConnection (vtkAlgorithmOutput *input)
	Add a connection to the given input port index.
virtual VTK_UNBLOCKTHREADS void	Update (int port)
	Bring this algorithm's outputs up-to-date.
virtual VTK_UNBLOCKTHREADS void	Update ()
	Bring this algorithm's outputs up-to-date.
virtual void	SetReleaseDataFlag (vtkTypeBool)
	Turn release data flag on or off for all output ports.
virtual vtkTypeBool	GetReleaseDataFlag ()
	Turn release data flag on or off for all output ports.
void	ReleaseDataFlagOn ()
	Turn release data flag on or off for all output ports.
void	ReleaseDataFlagOff ()
	Turn release data flag on or off for all output ports.
int	UpdateExtentIsEmpty (vtkInformation *pinfo, vtkDataObject *output)
	This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0.
int	UpdateExtentIsEmpty (vtkInformation *pinfo, int extentType)
	This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0.
int *	GetUpdateExtent ()
	These functions return the update extent for output ports that use 3D extents.
int *	GetUpdateExtent (int port)
	These functions return the update extent for output ports that use 3D extents.
void	GetUpdateExtent (int &x0, int &x1, int &y0, int &y1, int &z0, int &z1)
	These functions return the update extent for output ports that use 3D extents.
void	GetUpdateExtent (int port, int &x0, int &x1, int &y0, int &y1, int &z0, int &z1)
	These functions return the update extent for output ports that use 3D extents.
void	GetUpdateExtent (int extent[6])
	These functions return the update extent for output ports that use 3D extents.
void	GetUpdateExtent (int port, int extent[6])
	These functions return the update extent for output ports that use 3D extents.
int	GetUpdatePiece ()
	These functions return the update extent for output ports that use piece extents.
int	GetUpdatePiece (int port)
	These functions return the update extent for output ports that use piece extents.
int	GetUpdateNumberOfPieces ()
	These functions return the update extent for output ports that use piece extents.
int	GetUpdateNumberOfPieces (int port)
	These functions return the update extent for output ports that use piece extents.
int	GetUpdateGhostLevel ()
	These functions return the update extent for output ports that use piece extents.
int	GetUpdateGhostLevel (int port)
	These functions return the update extent for output ports that use piece extents.
void	SetProgressObserver (vtkProgressObserver *)
	If an ProgressObserver is set, the algorithm will report progress through it rather than directly.
virtual vtkProgressObserver *	GetProgressObserver ()
	If an ProgressObserver is set, the algorithm will report progress through it rather than directly.
void	SetNoPriorTemporalAccessInformationKey (int key)
	Set to all output ports of this algorithm the information key vtkStreamingDemandDrivenPipeline::NO_PRIOR_TEMPORAL_ACCESS().
void	SetNoPriorTemporalAccessInformationKey ()
	Set to all output ports of this algorithm the information key vtkStreamingDemandDrivenPipeline::NO_PRIOR_TEMPORAL_ACCESS().
Public Member Functions inherited from vtkObject
	vtkBaseTypeMacro (vtkObject, vtkObjectBase)
virtual void	DebugOn ()
	Turn debugging output on.
virtual void	DebugOff ()
	Turn debugging output off.
bool	GetDebug ()
	Get the value of the debug flag.
void	SetDebug (bool debugFlag)
	Set the value of the debug flag.
virtual void	Modified ()
	Update the modification time for this object.
virtual vtkMTimeType	GetMTime ()
	Return this object's modified time.
void	PrintSelf (ostream &os, vtkIndent indent) override
	Methods invoked by print to print information about the object including superclasses.
void	RemoveObserver (unsigned long tag)
void	RemoveObservers (unsigned long event)
void	RemoveObservers (const char *event)
void	RemoveAllObservers ()
vtkTypeBool	HasObserver (unsigned long event)
vtkTypeBool	HasObserver (const char *event)
vtkTypeBool	InvokeEvent (unsigned long event)
vtkTypeBool	InvokeEvent (const char *event)
std::string	GetObjectDescription () const override
	The object description printed in messages and PrintSelf output.
unsigned long	AddObserver (unsigned long event, vtkCommand *, float priority=0.0f)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object.
unsigned long	AddObserver (const char *event, vtkCommand *, float priority=0.0f)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object.
vtkCommand *	GetCommand (unsigned long tag)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object.
void	RemoveObserver (vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object.
void	RemoveObservers (unsigned long event, vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object.
void	RemoveObservers (const char *event, vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object.
vtkTypeBool	HasObserver (unsigned long event, vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object.
vtkTypeBool	HasObserver (const char *event, vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object.
template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, void(T::*callback)(), float priority=0.0f)
	Overloads to AddObserver that allow developers to add class member functions as callbacks for events.
template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, void(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f)
	Overloads to AddObserver that allow developers to add class member functions as callbacks for events.
template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, bool(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f)
	Allow user to set the AbortFlagOn() with the return value of the callback method.
vtkTypeBool	InvokeEvent (unsigned long event, void *callData)
	This method invokes an event and return whether the event was aborted or not.
vtkTypeBool	InvokeEvent (const char *event, void *callData)
	This method invokes an event and return whether the event was aborted or not.
virtual void	SetObjectName (const std::string &objectName)
	Set/get the name of this object for reporting purposes.
virtual std::string	GetObjectName () const
	Set/get the name of this object for reporting purposes.
Public Member Functions inherited from vtkObjectBase
const char *	GetClassName () const
	Return the class name as a string.
virtual std::string	GetObjectDescription () const
	The object description printed in messages and PrintSelf output.
virtual vtkTypeBool	IsA (const char *name)
	Return 1 if this class is the same type of (or a subclass of) the named class.
virtual vtkIdType	GetNumberOfGenerationsFromBase (const char *name)
	Given the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class).
virtual void	Delete ()
	Delete a VTK object.
virtual void	FastDelete ()
	Delete a reference to this object.
void	InitializeObjectBase ()
void	Print (ostream &os)
	Print an object to an ostream.
void	Register (vtkObjectBase *o)
	Increase the reference count (mark as used by another object).
virtual void	UnRegister (vtkObjectBase *o)
	Decrease the reference count (release by another object).
int	GetReferenceCount ()
	Return the current reference count of this object.
void	SetReferenceCount (int)
	Sets the reference count.
bool	GetIsInMemkind () const
	A local state flag that remembers whether this object lives in the normal or extended memory space.
virtual void	PrintHeader (ostream &os, vtkIndent indent)
	Methods invoked by print to print information about the object including superclasses.
virtual void	PrintTrailer (ostream &os, vtkIndent indent)
	Methods invoked by print to print information about the object including superclasses.

Protected Member Functions
	vtkPStreamTracer ()
	~vtkPStreamTracer () override
int	RequestData (vtkInformation *, vtkInformationVector **, vtkInformationVector *) override
	This is called by the superclass.
int	RequestUpdateExtent (vtkInformation *, vtkInformationVector **, vtkInformationVector *) override
	This is called by the superclass.
void	SetInterpolator (vtkAbstractInterpolatedVelocityField *)
Protected Member Functions inherited from vtkStreamTracer
	vtkStreamTracer ()
	~vtkStreamTracer () override
vtkExecutive *	CreateDefaultExecutive () override
	Create a default executive.
void	AddInput (vtkDataObject *)
int	RequestData (vtkInformation *, vtkInformationVector **, vtkInformationVector *) override
	This is called by the superclass.
int	FillInputPortInformation (int, vtkInformation *) override
	Fill the input port information objects for this algorithm.
void	Integrate (vtkPointData *inputData, vtkPolyData *output, vtkDataArray *seedSource, vtkIdList *seedIds, vtkIntArray *integrationDirections, vtkAbstractInterpolatedVelocityField *func, int maxCellSize, int vecType, const char *vecFieldName, double &propagation, vtkIdType &numSteps, double &integrationTime, std::vector< CustomTerminationCallbackType > &customTerminationCallback, std::vector< void * > &customTerminationClientData, std::vector< int > &customReasonForTermination)
double	SimpleIntegrate (double seed[3], double lastPoint[3], double stepSize, vtkAbstractInterpolatedVelocityField *func)
int	CheckInputs (vtkAbstractInterpolatedVelocityField *&func, int *maxCellSize)
int	SetupOutput (vtkInformation *inInfo, vtkInformation *outInfo)
void	InitializeSeeds (vtkDataArray *&seeds, vtkIdList *&seedIds, vtkIntArray *&integrationDirections, vtkDataSet *source)
Protected Member Functions inherited from vtkPolyDataAlgorithm
virtual vtkObjectBase *	NewInstanceInternal () const
	vtkPolyDataAlgorithm ()
	~vtkPolyDataAlgorithm () override
virtual int	RequestInformation (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector)
virtual int	RequestData (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector)
	This is called by the superclass.
virtual int	RequestUpdateExtent (vtkInformation *, vtkInformationVector **, vtkInformationVector *)
	This is called by the superclass.
virtual int	RequestUpdateTime (vtkInformation *, vtkInformationVector **, vtkInformationVector *)
	This is called by the superclass.
int	FillOutputPortInformation (int port, vtkInformation *info) override
	Fill the output port information objects for this algorithm.
int	FillInputPortInformation (int port, vtkInformation *info) override
	Fill the input port information objects for this algorithm.
Protected Member Functions inherited from vtkAlgorithm
virtual vtkObjectBase *	NewInstanceInternal () const
	vtkAlgorithm ()
	~vtkAlgorithm () override
bool	CheckUpstreamAbort ()
	Checks to see if an upstream filter has been aborted.
virtual int	FillInputPortInformation (int port, vtkInformation *info)
	Fill the input port information objects for this algorithm.
virtual int	FillOutputPortInformation (int port, vtkInformation *info)
	Fill the output port information objects for this algorithm.
virtual void	SetNumberOfInputPorts (int n)
	Set the number of input ports used by the algorithm.
virtual void	SetNumberOfOutputPorts (int n)
	Set the number of output ports provided by the algorithm.
int	InputPortIndexInRange (int index, const char *action)
int	OutputPortIndexInRange (int index, const char *action)
int	GetInputArrayAssociation (int idx, vtkInformationVector **inputVector)
	Get the association of the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass.
vtkInformation *	GetInputArrayFieldInformation (int idx, vtkInformationVector **inputVector)
	This method takes in an index (as specified in SetInputArrayToProcess) and a pipeline information vector.
virtual vtkExecutive *	CreateDefaultExecutive ()
	Create a default executive.
void	ReportReferences (vtkGarbageCollector *) override
virtual void	SetNthInputConnection (int port, int index, vtkAlgorithmOutput *input)
	Replace the Nth connection on the given input port.
virtual void	SetNumberOfInputConnections (int port, int n)
	Set the number of input connections on the given input port.
void	SetInputDataInternal (int port, vtkDataObject *input)
	These methods are used by subclasses to implement methods to set data objects directly as input.
void	AddInputDataInternal (int port, vtkDataObject *input)
int	GetInputArrayAssociation (int idx, int connection, vtkInformationVector **inputVector)
	Filters that have multiple connections on one port can use this signature.
int	GetInputArrayAssociation (int idx, vtkDataObject *input)
	Filters that have multiple connections on one port can use this signature.
vtkDataArray *	GetInputArrayToProcess (int idx, vtkInformationVector **inputVector)
	Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass.
vtkDataArray *	GetInputArrayToProcess (int idx, vtkInformationVector **inputVector, int &association)
	Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass.
vtkDataArray *	GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector)
	Filters that have multiple connections on one port can use this signature.
vtkDataArray *	GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association)
	Filters that have multiple connections on one port can use this signature.
vtkDataArray *	GetInputArrayToProcess (int idx, vtkDataObject *input)
	Filters that have multiple connections on one port can use this signature.
vtkDataArray *	GetInputArrayToProcess (int idx, vtkDataObject *input, int &association)
	Filters that have multiple connections on one port can use this signature.
vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector)
	Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass.
vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector, int &association)
	Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass.
vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector)
	Filters that have multiple connections on one port can use this signature.
vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association)
	Filters that have multiple connections on one port can use this signature.
vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, vtkDataObject *input)
	Filters that have multiple connections on one port can use this signature.
vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, vtkDataObject *input, int &association)
	Filters that have multiple connections on one port can use this signature.
virtual void	SetErrorCode (unsigned long)
	The error code contains a possible error that occurred while reading or writing the file.
Protected Member Functions inherited from vtkObject
	vtkObject ()
	~vtkObject () override
void	RegisterInternal (vtkObjectBase *, vtkTypeBool check) override
void	UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) override
void	InternalGrabFocus (vtkCommand *mouseEvents, vtkCommand *keypressEvents=nullptr)
	These methods allow a command to exclusively grab all events.
void	InternalReleaseFocus ()
	These methods allow a command to exclusively grab all events.
Protected Member Functions inherited from vtkObjectBase
	vtkObjectBase ()
virtual	~vtkObjectBase ()
virtual void	RegisterInternal (vtkObjectBase *, vtkTypeBool check)
virtual void	UnRegisterInternal (vtkObjectBase *, vtkTypeBool check)
virtual void	ReportReferences (vtkGarbageCollector *)
virtual void	ObjectFinalize ()
	vtkObjectBase (const vtkObjectBase &)
void	operator= (const vtkObjectBase &)

Protected Attributes
vtkMultiProcessController *	Controller
vtkAbstractInterpolatedVelocityField *	Interpolator
int	EmptyData
Protected Attributes inherited from vtkStreamTracer
bool	GenerateNormalsInIntegrate
double	StartPosition [3]
double	TerminalSpeed
double	LastUsedStepSize
double	MaximumPropagation
double	MinimumIntegrationStep
double	MaximumIntegrationStep
double	InitialIntegrationStep
int	IntegrationStepUnit
int	IntegrationDirection
vtkInitialValueProblemSolver *	Integrator
double	MaximumError
vtkIdType	MaximumNumberOfSteps
bool	ComputeVorticity
double	RotationScale
bool	SurfaceStreamlines
vtkAbstractInterpolatedVelocityField *	InterpolatorPrototype
vtkCompositeDataSet *	InputData
vtkDataSetAttributesFieldList	InputPD
bool	HasMatchingPointAttributes
bool	ForceSerialExecution
bool	SerialExecution
std::vector< CustomTerminationCallbackType >	CustomTerminationCallback
std::vector< void * >	CustomTerminationClientData
std::vector< int >	CustomReasonForTermination
bool	UseLocalSeedSource
Protected Attributes inherited from vtkAlgorithm
vtkTimeStamp	LastAbortCheckTime
vtkInformation *	Information
double	Progress
char *	ProgressText
vtkProgressObserver *	ProgressObserver
unsigned long	ErrorCode
	The error code contains a possible error that occurred while reading or writing the file.
Protected Attributes inherited from vtkObject
bool	Debug
vtkTimeStamp	MTime
vtkSubjectHelper *	SubjectHelper
std::string	ObjectName
Protected Attributes inherited from vtkObjectBase
std::atomic< int32_t >	ReferenceCount
vtkWeakPointerBase **	WeakPointers

Friends
class	AbstractPStreamTracerUtils
typedef vtkStreamTracer	Superclass
	Standard methods to instantiate the class, obtain type information and print object state.
static vtkPStreamTracer *	New ()
	Standard methods to instantiate the class, obtain type information and print object state.
static vtkTypeBool	IsTypeOf (const char *type)
	Standard methods to instantiate the class, obtain type information and print object state.
static vtkPStreamTracer *	SafeDownCast (vtkObjectBase *o)
	Standard methods to instantiate the class, obtain type information and print object state.
virtual vtkTypeBool	IsA (const char *type)
	Standard methods to instantiate the class, obtain type information and print object state.
vtkPStreamTracer *	NewInstance () const
	Standard methods to instantiate the class, obtain type information and print object state.
void	PrintSelf (ostream &os, vtkIndent indent) override
	Standard methods to instantiate the class, obtain type information and print object state.
virtual vtkObjectBase *	NewInstanceInternal () const
	Standard methods to instantiate the class, obtain type information and print object state.

Additional Inherited Members
Public Types inherited from vtkStreamTracer
enum	Units { LENGTH_UNIT = 1 , CELL_LENGTH_UNIT = 2 }
enum	Solvers {   RUNGE_KUTTA2 , RUNGE_KUTTA4 , RUNGE_KUTTA45 , NONE ,   UNKNOWN }
enum	ReasonForTermination {   OUT_OF_DOMAIN = vtkInitialValueProblemSolver::OUT_OF_DOMAIN , NOT_INITIALIZED = vtkInitialValueProblemSolver::NOT_INITIALIZED , UNEXPECTED_VALUE = vtkInitialValueProblemSolver::UNEXPECTED_VALUE , OUT_OF_LENGTH = 4 ,   OUT_OF_STEPS = 5 , STAGNATION = 6 , FIXED_REASONS_FOR_TERMINATION_COUNT }
enum	{ FORWARD , BACKWARD , BOTH }
enum	{ INTERPOLATOR_WITH_DATASET_POINT_LOCATOR , INTERPOLATOR_WITH_CELL_LOCATOR }
typedef vtkPolyDataAlgorithm	Superclass
	Standard methods to obtain type information and print object state.
Public Types inherited from vtkPolyDataAlgorithm
typedef vtkAlgorithm	Superclass
Public Types inherited from vtkAlgorithm
enum	DesiredOutputPrecision { SINGLE_PRECISION , DOUBLE_PRECISION , DEFAULT_PRECISION }
	Values used for setting the desired output precision for various algorithms. More...
typedef vtkObject	Superclass
Static Public Member Functions inherited from vtkStreamTracer
static vtkStreamTracer *	New ()
	Construct the object to start from position (0,0,0), with forward integration, terminal speed 1.0E-12, vorticity computation on, integration step size 0.5 (in cell length unit), maximum number of steps 2000, using Runge-Kutta2, and maximum propagation 1.0 (in arc length unit).
static vtkTypeBool	IsTypeOf (const char *type)
	Standard methods to obtain type information and print object state.
static vtkStreamTracer *	SafeDownCast (vtkObjectBase *o)
	Standard methods to obtain type information and print object state.
Static Public Member Functions inherited from vtkPolyDataAlgorithm
static vtkPolyDataAlgorithm *	New ()
static vtkTypeBool	IsTypeOf (const char *type)
static vtkPolyDataAlgorithm *	SafeDownCast (vtkObjectBase *o)
Static Public Member Functions inherited from vtkAlgorithm
static vtkAlgorithm *	New ()
static vtkTypeBool	IsTypeOf (const char *type)
static vtkAlgorithm *	SafeDownCast (vtkObjectBase *o)
static vtkInformationIntegerKey *	INPUT_IS_OPTIONAL ()
	Keys used to specify input port requirements.
static vtkInformationIntegerKey *	INPUT_IS_REPEATABLE ()
static vtkInformationInformationVectorKey *	INPUT_REQUIRED_FIELDS ()
static vtkInformationStringVectorKey *	INPUT_REQUIRED_DATA_TYPE ()
static vtkInformationInformationVectorKey *	INPUT_ARRAYS_TO_PROCESS ()
static vtkInformationIntegerKey *	INPUT_PORT ()
static vtkInformationIntegerKey *	INPUT_CONNECTION ()
static vtkInformationIntegerKey *	CAN_PRODUCE_SUB_EXTENT ()
	This key tells the executive that a particular output port is capable of producing an arbitrary subextent of the whole extent.
static vtkInformationIntegerKey *	CAN_HANDLE_PIECE_REQUEST ()
	Key that tells the pipeline that a particular algorithm can or cannot handle piece request.
static vtkInformationIntegerKey *	ABORTED ()
static void	SetDefaultExecutivePrototype (vtkExecutive *proto)
	If the DefaultExecutivePrototype is set, a copy of it is created in CreateDefaultExecutive() using NewInstance().
Static Public Member Functions inherited from vtkObject
static vtkObject *	New ()
	Create an object with Debug turned off, modified time initialized to zero, and reference counting on.
static void	BreakOnError ()
	This method is called when vtkErrorMacro executes.
static void	SetGlobalWarningDisplay (vtkTypeBool val)
	This is a global flag that controls whether any debug, warning or error messages are displayed.
static void	GlobalWarningDisplayOn ()
	This is a global flag that controls whether any debug, warning or error messages are displayed.
static void	GlobalWarningDisplayOff ()
	This is a global flag that controls whether any debug, warning or error messages are displayed.
static vtkTypeBool	GetGlobalWarningDisplay ()
	This is a global flag that controls whether any debug, warning or error messages are displayed.
Static Public Member Functions inherited from vtkObjectBase
static vtkTypeBool	IsTypeOf (const char *name)
	Return 1 if this class type is the same type of (or a subclass of) the named class.
static vtkIdType	GetNumberOfGenerationsFromBaseType (const char *name)
	Given a the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class).
static vtkObjectBase *	New ()
	Create an object with Debug turned off, modified time initialized to zero, and reference counting on.
static void	SetMemkindDirectory (const char *directoryname)
	The name of a directory, ideally mounted -o dax, to memory map an extended memory space within.
static bool	GetUsingMemkind ()
	A global state flag that controls whether vtkObjects are constructed in the usual way (the default) or within the extended memory space.
Public Attributes inherited from vtkAlgorithm
std::atomic< vtkTypeBool >	AbortExecute
Static Protected Member Functions inherited from vtkAlgorithm
static vtkInformationIntegerKey *	PORT_REQUIREMENTS_FILLED ()
Static Protected Member Functions inherited from vtkObjectBase
static vtkMallocingFunction	GetCurrentMallocFunction ()
static vtkReallocingFunction	GetCurrentReallocFunction ()
static vtkFreeingFunction	GetCurrentFreeFunction ()
static vtkFreeingFunction	GetAlternateFreeFunction ()
Static Protected Attributes inherited from vtkStreamTracer
static const double	EPSILON
Static Protected Attributes inherited from vtkAlgorithm
static vtkTimeStamp	LastAbortTime
static vtkExecutive *	DefaultExecutivePrototype

Detailed Description

parallel streamline generators

This class implements parallel streamline generators. By default all processes must have access to the WHOLE seed source, i.e. the source must be identical on all processes. If property UseLocalSeedSource is set to false then this filter will aggregate seed sources from all ranks into a single dataset.

See also

vtkStreamTracer

Tests:

vtkPStreamTracer (Tests)

Definition at line 37 of file vtkPStreamTracer.h.

Member Typedef Documentation

Superclass

typedef vtkStreamTracer vtkPStreamTracer::Superclass

Standard methods to instantiate the class, obtain type information and print object state.

Definition at line 46 of file vtkPStreamTracer.h.

Constructor & Destructor Documentation

vtkPStreamTracer()

vtkPStreamTracer::vtkPStreamTracer ( )

protected

~vtkPStreamTracer()

vtkPStreamTracer::~vtkPStreamTracer ( )

overrideprotected

Member Function Documentation

New()

static vtkPStreamTracer * vtkPStreamTracer::New ( )

static

Standard methods to instantiate the class, obtain type information and print object state.

IsTypeOf()

static vtkTypeBool vtkPStreamTracer::IsTypeOf ( const char *  type )

static

Standard methods to instantiate the class, obtain type information and print object state.

IsA()

virtual vtkTypeBool vtkPStreamTracer::IsA ( const char *  type )

virtual

Standard methods to instantiate the class, obtain type information and print object state.

Reimplemented from vtkStreamTracer.

SafeDownCast()

static vtkPStreamTracer * vtkPStreamTracer::SafeDownCast ( vtkObjectBase *  o )

static

Standard methods to instantiate the class, obtain type information and print object state.

NewInstanceInternal()

virtual vtkObjectBase * vtkPStreamTracer::NewInstanceInternal ( ) const

protectedvirtual

Standard methods to instantiate the class, obtain type information and print object state.

Reimplemented from vtkStreamTracer.

NewInstance()

vtkPStreamTracer * vtkPStreamTracer::NewInstance

(

)

const

Standard methods to instantiate the class, obtain type information and print object state.

PrintSelf()

void vtkPStreamTracer::PrintSelf ( ostream &  os, vtkIndent  indent  )

overridevirtual

Standard methods to instantiate the class, obtain type information and print object state.

Reimplemented from vtkPolyDataAlgorithm.

SetController()

virtual void vtkPStreamTracer::SetController ( vtkMultiProcessController *  controller )

virtual

Set/Get the controller use in compositing (set to the global controller by default) If not using the default, this must be called before any other methods.

GetController()

virtual vtkMultiProcessController * vtkPStreamTracer::GetController ( )

virtual

Set/Get the controller use in compositing (set to the global controller by default) If not using the default, this must be called before any other methods.

RequestData()

int vtkPStreamTracer::RequestData ( vtkInformation *  request, vtkInformationVector **  inputVector, vtkInformationVector *  outputVector  )

overrideprotectedvirtual

This is called by the superclass.

This is the method you should override.

Reimplemented from vtkPolyDataAlgorithm.

RequestUpdateExtent()

int vtkPStreamTracer::RequestUpdateExtent ( vtkInformation *  , vtkInformationVector **  , vtkInformationVector *    )

overrideprotectedvirtual

This is called by the superclass.

This is the method you should override.

Reimplemented from vtkPolyDataAlgorithm.

SetInterpolator()

void vtkPStreamTracer::SetInterpolator ( vtkAbstractInterpolatedVelocityField *  )

protected

Friends And Related Symbol Documentation

AbstractPStreamTracerUtils

friend class AbstractPStreamTracerUtils

friend

Definition at line 89 of file vtkPStreamTracer.h.

Member Data Documentation

Controller

vtkMultiProcessController* vtkPStreamTracer::Controller

protected

Definition at line 67 of file vtkPStreamTracer.h.

Interpolator

vtkAbstractInterpolatedVelocityField* vtkPStreamTracer::Interpolator

protected

Definition at line 69 of file vtkPStreamTracer.h.

EmptyData

int vtkPStreamTracer::EmptyData

protected

Definition at line 72 of file vtkPStreamTracer.h.

---

The documentation for this class was generated from the following file:

• Filters/ParallelFlowPaths/vtkPStreamTracer.h