|
| virtual int | IsA (const char *type) |
| | Return 1 if this class is the same type of (or a subclass of) the named class. More...
|
| |
| vtkPistonMapper * | NewInstance () const |
| |
| void | PrintSelf (ostream &os, vtkIndent indent) |
| | Methods invoked by print to print information about the object including superclasses. More...
|
| |
| vtkPistonDataObject * | GetPistonDataObjectInput (int port) |
| | A convenience method to reduce code duplication that gets the input as the expected type or NULL. More...
|
| |
| void | ShallowCopy (vtkAbstractMapper *m) |
| | Make a shallow copy of this mapper. More...
|
| |
| virtual void | Render (vtkRenderer *ren, vtkActor *a) |
| | Method initiates the mapping process. More...
|
| |
| virtual void | ReleaseGraphicsResources (vtkWindow *) |
| | Release any graphics resources that are being consumed by this mapper. More...
|
| |
| virtual bool | GetSupportsSelection () |
| | WARNING: INTERNAL METHOD - NOT INTENDED FOR GENERAL USE DO NOT USE THIS METHOD OUTSIDE OF THE RENDERING PROCESS Used by vtkHardwareSelector to determine if the prop supports hardware selection. More...
|
| |
|
| virtual double * | GetBounds () |
| | Return bounding box (array of six doubles) of data expressed as (xmin,xmax, ymin,ymax, zmin,zmax). More...
|
| |
| virtual void | GetBounds (double bounds[6]) |
| | Return bounding box (array of six doubles) of data expressed as (xmin,xmax, ymin,ymax, zmin,zmax). More...
|
| |
|
| virtual void | Update () |
| | Bring this algorithm's outputs up-to-date. More...
|
| |
|
| virtual void | SetPiece (int) |
| | If you want only a part of the data, specify by setting the piece. More...
|
| |
| virtual int | GetPiece () |
| | If you want only a part of the data, specify by setting the piece. More...
|
| |
| virtual void | SetNumberOfPieces (int) |
| | If you want only a part of the data, specify by setting the piece. More...
|
| |
| virtual int | GetNumberOfPieces () |
| | If you want only a part of the data, specify by setting the piece. More...
|
| |
|
| virtual void | SetGhostLevel (int) |
| | Set the number of ghost cells to return. More...
|
| |
| virtual int | GetGhostLevel () |
| | Set the number of ghost cells to return. More...
|
| |
| vtkMapper * | NewInstance () const |
| |
| void | PrintSelf (ostream &os, vtkIndent indent) |
| | Methods invoked by print to print information about the object including superclasses. More...
|
| |
| void | ShallowCopy (vtkAbstractMapper *m) |
| | Make a shallow copy of this mapper. More...
|
| |
| vtkMTimeType | GetMTime () |
| | Overload standard modified time function. More...
|
| |
| virtual void | CreateDefaultLookupTable () |
| | Create default lookup table. More...
|
| |
| const char * | GetColorModeAsString () |
| | Return the method of coloring scalar data. More...
|
| |
| virtual void | SetScalarMode (int) |
| | Control how the filter works with scalar point data and cell attribute data. More...
|
| |
| virtual int | GetScalarMode () |
| |
| void | SetScalarModeToDefault () |
| |
| void | SetScalarModeToUsePointData () |
| |
| void | SetScalarModeToUseCellData () |
| |
| void | SetScalarModeToUsePointFieldData () |
| |
| void | SetScalarModeToUseCellFieldData () |
| |
| void | SetScalarModeToUseFieldData () |
| |
| virtual void | SetFieldDataTupleId (vtkIdType) |
| |
| virtual vtkIdType | GetFieldDataTupleId () |
| |
| char * | GetArrayName () |
| | Get the array name or number and component to color by. More...
|
| |
| int | GetArrayId () |
| |
| int | GetArrayAccessMode () |
| |
| int | GetArrayComponent () |
| |
| const char * | GetScalarModeAsString () |
| | Return the method for obtaining scalar data. More...
|
| |
| void | SetRenderTime (double time) |
| | This instance variable is used by vtkLODActor to determine which mapper to use. More...
|
| |
| virtual double | GetRenderTime () |
| |
| vtkDataSet * | GetInput () |
| | Get the input as a vtkDataSet. More...
|
| |
| vtkDataSet * | GetInputAsDataSet () |
| | Get the input to this mapper as a vtkDataSet, instead of as a more specialized data type that the subclass may return from GetInput(). More...
|
| |
| const char * | GetScalarMaterialModeAsString () |
| | Return the light-model color mode. More...
|
| |
| virtual bool | GetIsOpaque () |
| | Returns if the mapper does not expect to have translucent geometry. More...
|
| |
| virtual int | CanUseTextureMapForColoring (vtkDataObject *input) |
| | Returns if we can use texture maps for scalar coloring. More...
|
| |
| void | ClearInvertibleColor () |
| | Used internally by vtkValuePass. More...
|
| |
| void | ClearColorArrays () |
| | Call to force a rebuild of color result arrays on next MapScalars. More...
|
| |
| vtkUnsignedCharArray * | GetColorMapColors () |
| | Provide read access to the color array. More...
|
| |
| vtkFloatArray * | GetColorCoordinates () |
| | Provide read access to the color texture coordinate array. More...
|
| |
| vtkImageData * | GetColorTextureMap () |
| | Provide read access to the color texture array. More...
|
| |
| void | SetLookupTable (vtkScalarsToColors *lut) |
| | Specify a lookup table for the mapper to use. More...
|
| |
| vtkScalarsToColors * | GetLookupTable () |
| | Specify a lookup table for the mapper to use. More...
|
| |
| virtual void | SetScalarVisibility (int) |
| | Turn on/off flag to control whether scalar data is used to color objects. More...
|
| |
| virtual int | GetScalarVisibility () |
| | Turn on/off flag to control whether scalar data is used to color objects. More...
|
| |
| virtual void | ScalarVisibilityOn () |
| | Turn on/off flag to control whether scalar data is used to color objects. More...
|
| |
| virtual void | ScalarVisibilityOff () |
| | Turn on/off flag to control whether scalar data is used to color objects. More...
|
| |
| virtual void | SetStatic (int) |
| | Turn on/off flag to control whether the mapper's data is static. More...
|
| |
| virtual int | GetStatic () |
| | Turn on/off flag to control whether the mapper's data is static. More...
|
| |
| virtual void | StaticOn () |
| | Turn on/off flag to control whether the mapper's data is static. More...
|
| |
| virtual void | StaticOff () |
| | Turn on/off flag to control whether the mapper's data is static. More...
|
| |
| virtual void | SetColorMode (int) |
| | default (ColorModeToDefault), unsigned char scalars are treated as colors, and NOT mapped through the lookup table, while everything else is. More...
|
| |
| virtual int | GetColorMode () |
| | default (ColorModeToDefault), unsigned char scalars are treated as colors, and NOT mapped through the lookup table, while everything else is. More...
|
| |
| void | SetColorModeToDefault () |
| | default (ColorModeToDefault), unsigned char scalars are treated as colors, and NOT mapped through the lookup table, while everything else is. More...
|
| |
| void | SetColorModeToMapScalars () |
| | default (ColorModeToDefault), unsigned char scalars are treated as colors, and NOT mapped through the lookup table, while everything else is. More...
|
| |
| void | SetColorModeToDirectScalars () |
| | default (ColorModeToDefault), unsigned char scalars are treated as colors, and NOT mapped through the lookup table, while everything else is. More...
|
| |
| virtual void | SetInterpolateScalarsBeforeMapping (int) |
| | By default, vertex color is used to map colors to a surface. More...
|
| |
| virtual int | GetInterpolateScalarsBeforeMapping () |
| | By default, vertex color is used to map colors to a surface. More...
|
| |
| virtual void | InterpolateScalarsBeforeMappingOn () |
| | By default, vertex color is used to map colors to a surface. More...
|
| |
| virtual void | InterpolateScalarsBeforeMappingOff () |
| | By default, vertex color is used to map colors to a surface. More...
|
| |
| virtual void | SetUseLookupTableScalarRange (int) |
| | Control whether the mapper sets the lookuptable range based on its own ScalarRange, or whether it will use the LookupTable ScalarRange regardless of it's own setting. More...
|
| |
| virtual int | GetUseLookupTableScalarRange () |
| | Control whether the mapper sets the lookuptable range based on its own ScalarRange, or whether it will use the LookupTable ScalarRange regardless of it's own setting. More...
|
| |
| virtual void | UseLookupTableScalarRangeOn () |
| | Control whether the mapper sets the lookuptable range based on its own ScalarRange, or whether it will use the LookupTable ScalarRange regardless of it's own setting. More...
|
| |
| virtual void | UseLookupTableScalarRangeOff () |
| | Control whether the mapper sets the lookuptable range based on its own ScalarRange, or whether it will use the LookupTable ScalarRange regardless of it's own setting. More...
|
| |
| virtual void | SetScalarRange (double, double) |
| | Specify range in terms of scalar minimum and maximum (smin,smax). More...
|
| |
| void | SetScalarRange (double[2]) |
| | Specify range in terms of scalar minimum and maximum (smin,smax). More...
|
| |
| virtual double * | GetScalarRange () |
| | Specify range in terms of scalar minimum and maximum (smin,smax). More...
|
| |
| virtual void | GetScalarRange (double data[2]) |
| | Specify range in terms of scalar minimum and maximum (smin,smax). More...
|
| |
| virtual void | SetImmediateModeRendering (int) |
| | Turn on/off flag to control whether data is rendered using immediate mode or note. More...
|
| |
| virtual int | GetImmediateModeRendering () |
| | Turn on/off flag to control whether data is rendered using immediate mode or note. More...
|
| |
| virtual void | ImmediateModeRenderingOn () |
| | Turn on/off flag to control whether data is rendered using immediate mode or note. More...
|
| |
| virtual void | ImmediateModeRenderingOff () |
| | Turn on/off flag to control whether data is rendered using immediate mode or note. More...
|
| |
| virtual int | GetForceCompileOnly () |
| | Force compile only mode in case display lists are used (ImmediateModeRendering is false). More...
|
| |
| void | SetForceCompileOnly (int value) |
| | Force compile only mode in case display lists are used (ImmediateModeRendering is false). More...
|
| |
| void | SelectColorArray (int arrayNum) |
| | When ScalarMode is set to UsePointFieldData or UseCellFieldData, you can specify which array to use for coloring using these methods. More...
|
| |
| void | SelectColorArray (const char *arrayName) |
| | When ScalarMode is set to UsePointFieldData or UseCellFieldData, you can specify which array to use for coloring using these methods. More...
|
| |
| void | ColorByArrayComponent (int arrayNum, int component) |
| | Legacy: These methods used to be used to specify the array component. More...
|
| |
| void | ColorByArrayComponent (const char *arrayName, int component) |
| | Legacy: These methods used to be used to specify the array component. More...
|
| |
| void | SetRelativeCoincidentTopologyPolygonOffsetParameters (double factor, double units) |
| | Used to set the polygon offset values relative to the global Used when ResolveCoincidentTopology is set to PolygonOffset. More...
|
| |
| void | GetRelativeCoincidentTopologyPolygonOffsetParameters (double &factor, double &units) |
| | Used to set the polygon offset values relative to the global Used when ResolveCoincidentTopology is set to PolygonOffset. More...
|
| |
| void | SetRelativeCoincidentTopologyLineOffsetParameters (double factor, double units) |
| | Used to set the line offset values relative to the global Used when ResolveCoincidentTopology is set to PolygonOffset. More...
|
| |
| void | GetRelativeCoincidentTopologyLineOffsetParameters (double &factor, double &units) |
| | Used to set the line offset values relative to the global Used when ResolveCoincidentTopology is set to PolygonOffset. More...
|
| |
| void | SetRelativeCoincidentTopologyPointOffsetParameter (double units) |
| | Used to set the point offset value relative to the global Used when ResolveCoincidentTopology is set to PolygonOffset. More...
|
| |
| void | GetRelativeCoincidentTopologyPointOffsetParameter (double &units) |
| | Used to set the point offset value relative to the global Used when ResolveCoincidentTopology is set to PolygonOffset. More...
|
| |
| void | GetCoincidentTopologyPolygonOffsetParameters (double &factor, double &units) |
| | Get the net paramters for handlig coincident topology obtained by summing the global values with the relative values. More...
|
| |
| void | GetCoincidentTopologyLineOffsetParameters (double &factor, double &units) |
| | Get the net paramters for handlig coincident topology obtained by summing the global values with the relative values. More...
|
| |
| void | GetCoincidentTopologyPointOffsetParameter (double &units) |
| | Get the net paramters for handlig coincident topology obtained by summing the global values with the relative values. More...
|
| |
| virtual vtkUnsignedCharArray * | MapScalars (double alpha) |
| | Map the scalars (if there are any scalars and ScalarVisibility is on) through the lookup table, returning an unsigned char RGBA array. More...
|
| |
| virtual vtkUnsignedCharArray * | MapScalars (double alpha, int &cellFlag) |
| | Map the scalars (if there are any scalars and ScalarVisibility is on) through the lookup table, returning an unsigned char RGBA array. More...
|
| |
| virtual vtkUnsignedCharArray * | MapScalars (vtkDataSet *input, double alpha) |
| | Map the scalars (if there are any scalars and ScalarVisibility is on) through the lookup table, returning an unsigned char RGBA array. More...
|
| |
| virtual vtkUnsignedCharArray * | MapScalars (vtkDataSet *input, double alpha, int &cellFlag) |
| | Map the scalars (if there are any scalars and ScalarVisibility is on) through the lookup table, returning an unsigned char RGBA array. More...
|
| |
| virtual void | SetScalarMaterialMode (int) |
| | Set/Get the light-model color mode. More...
|
| |
| virtual int | GetScalarMaterialMode () |
| | Set/Get the light-model color mode. More...
|
| |
| void | SetScalarMaterialModeToDefault () |
| | Set/Get the light-model color mode. More...
|
| |
| void | SetScalarMaterialModeToAmbient () |
| | Set/Get the light-model color mode. More...
|
| |
| void | SetScalarMaterialModeToDiffuse () |
| | Set/Get the light-model color mode. More...
|
| |
| void | SetScalarMaterialModeToAmbientAndDiffuse () |
| | Set/Get the light-model color mode. More...
|
| |
| void | UseInvertibleColorFor (vtkDataObject *input, int scalarMode, int arrayAccessMode, int arrayId, const char *arrayName, int arrayComponent, double *scalarRange) |
| | Used internally by vtkValuePass. More...
|
| |
| void | UseInvertibleColorFor (int scalarMode, int arrayAccessMode, int arrayId, const char *arrayName, int arrayComponent, double *scalarRange) |
| | Used internally by vtkValuePass. More...
|
| |
| vtkAbstractMapper3D * | NewInstance () const |
| |
| double | GetLength () |
| | Return the diagonal length of this mappers bounding box. More...
|
| |
| virtual int | IsARayCastMapper () |
| | Is this a ray cast mapper? A subclass would return 1 if the ray caster is needed to generate an image from this mapper. More...
|
| |
| virtual int | IsARenderIntoImageMapper () |
| | Is this a "render into image" mapper? A subclass would return 1 if the mapper produces an image by rendering into a software image buffer. More...
|
| |
| void | GetClippingPlaneInDataCoords (vtkMatrix4x4 *propMatrix, int i, double planeEquation[4]) |
| | Get the ith clipping plane as a homogeneous plane equation. More...
|
| |
| int | GetNumberOfClippingPlanes () |
| | Get the number of clipping planes. More...
|
| |
| double * | GetCenter () |
| | Return the Center of this mapper's data. More...
|
| |
| void | GetCenter (double center[3]) |
| | Return the Center of this mapper's data. More...
|
| |
| vtkAbstractMapper * | NewInstance () const |
| |
| void | SetClippingPlanes (vtkPlanes *planes) |
| | An alternative way to set clipping planes: use up to six planes found in the supplied instance of the implicit function vtkPlanes. More...
|
| |
| void | ShallowCopy (vtkAbstractMapper *m) |
| | Make a shallow copy of this mapper. More...
|
| |
| virtual double | GetTimeToDraw () |
| | Get the time required to draw the geometry last time it was rendered. More...
|
| |
| void | AddClippingPlane (vtkPlane *plane) |
| | Specify clipping planes to be applied when the data is mapped (at most 6 clipping planes can be specified). More...
|
| |
| void | RemoveClippingPlane (vtkPlane *plane) |
| | Specify clipping planes to be applied when the data is mapped (at most 6 clipping planes can be specified). More...
|
| |
| void | RemoveAllClippingPlanes () |
| | Specify clipping planes to be applied when the data is mapped (at most 6 clipping planes can be specified). More...
|
| |
| virtual void | SetClippingPlanes (vtkPlaneCollection *) |
| | Get/Set the vtkPlaneCollection which specifies the clipping planes. More...
|
| |
| virtual vtkPlaneCollection * | GetClippingPlanes () |
| | Get/Set the vtkPlaneCollection which specifies the clipping planes. More...
|
| |
| vtkAlgorithm * | NewInstance () const |
| |
| int | HasExecutive () |
| | Check whether this algorithm has an assigned executive. More...
|
| |
| vtkExecutive * | GetExecutive () |
| | Get this algorithm's executive. More...
|
| |
| virtual void | SetExecutive (vtkExecutive *executive) |
| | Set this algorithm's executive. More...
|
| |
| virtual int | ProcessRequest (vtkInformation *request, vtkInformationVector **inInfo, vtkInformationVector *outInfo) |
| | Upstream/Downstream requests form the generalized interface through which executives invoke a algorithm's functionality. More...
|
| |
| int | ProcessRequest (vtkInformation *request, vtkCollection *inInfo, vtkInformationVector *outInfo) |
| | Version of ProcessRequest() that is wrapped. More...
|
| |
| virtual int | ComputePipelineMTime (vtkInformation *request, vtkInformationVector **inInfoVec, vtkInformationVector *outInfoVec, int requestFromOutputPort, vtkMTimeType *mtime) |
| | A special version of ProcessRequest meant specifically for the pipeline modified time request. More...
|
| |
| virtual int | ModifyRequest (vtkInformation *request, int when) |
| | This method gives the algorithm a chance to modify the contents of a request before or after (specified in the when argument) it is forwarded. More...
|
| |
| vtkInformation * | GetInputPortInformation (int port) |
| | Get the information object associated with an input port. More...
|
| |
| vtkInformation * | GetOutputPortInformation (int port) |
| | Get the information object associated with an output port. More...
|
| |
| int | GetNumberOfInputPorts () |
| | Get the number of input ports used by the algorithm. More...
|
| |
| int | GetNumberOfOutputPorts () |
| | Get the number of output ports provided by the algorithm. More...
|
| |
| void | UpdateProgress (double amount) |
| | Update the progress of the process object. More...
|
| |
| virtual void | SetInputArrayToProcess (int idx, int port, int connection, const char *fieldAssociation, const char *attributeTypeorName) |
| | String based versions of SetInputArrayToProcess(). More...
|
| |
| vtkInformation * | GetInputArrayInformation (int idx) |
| | Get the info object for the specified input array to this algorithm. More...
|
| |
| void | RemoveAllInputs () |
| | Remove all the input data. More...
|
| |
| vtkDataObject * | GetOutputDataObject (int port) |
| | Get the data object that will contain the algorithm output for the given port. More...
|
| |
| vtkDataObject * | GetInputDataObject (int port, int connection) |
| | Get the data object that will contain the algorithm input for the given port and given connection. More...
|
| |
| virtual void | RemoveInputConnection (int port, vtkAlgorithmOutput *input) |
| | Remove a connection from the given input port index. More...
|
| |
| virtual void | RemoveInputConnection (int port, int idx) |
| | Remove a connection given by index idx. More...
|
| |
| virtual void | RemoveAllInputConnections (int port) |
| | Removes all input connections. More...
|
| |
| virtual void | SetInputDataObject (int port, vtkDataObject *data) |
| | Sets the data-object as an input on the given port index. More...
|
| |
| virtual void | SetInputDataObject (vtkDataObject *data) |
| |
| virtual void | AddInputDataObject (int port, vtkDataObject *data) |
| | Add the data-object as an input to this given port. More...
|
| |
| virtual void | AddInputDataObject (vtkDataObject *data) |
| |
| vtkAlgorithmOutput * | GetOutputPort (int index) |
| | Get a proxy object corresponding to the given output port of this algorithm. More...
|
| |
| vtkAlgorithmOutput * | GetOutputPort () |
| |
| int | GetNumberOfInputConnections (int port) |
| | Get the number of inputs currently connected to a port. More...
|
| |
| int | GetTotalNumberOfInputConnections () |
| | Get the total number of inputs for this algorithm. More...
|
| |
| vtkAlgorithmOutput * | GetInputConnection (int port, int index) |
| | Get the algorithm output port connected to an input port. More...
|
| |
| vtkAlgorithm * | GetInputAlgorithm (int port, int index, int &algPort) |
| | Returns the algorithm and the output port index of that algorithm connected to a port-index pair. More...
|
| |
| vtkAlgorithm * | GetInputAlgorithm (int port, int index) |
| | Returns the algorithm connected to a port-index pair. More...
|
| |
| vtkAlgorithm * | GetInputAlgorithm () |
| | Equivalent to GetInputAlgorithm(0, 0). More...
|
| |
| vtkExecutive * | GetInputExecutive (int port, int index) |
| | Returns the executive associated with a particular input connection. More...
|
| |
| vtkExecutive * | GetInputExecutive () |
| | Equivalent to GetInputExecutive(0, 0) More...
|
| |
| vtkInformation * | GetInputInformation (int port, int index) |
| | Return the information object that is associated with a particular input connection. More...
|
| |
| vtkInformation * | GetInputInformation () |
| | Equivalent to GetInputInformation(0, 0) More...
|
| |
| vtkInformation * | GetOutputInformation (int port) |
| | Return the information object that is associated with a particular output port. More...
|
| |
| virtual int | Update (int port, vtkInformationVector *requests) |
| | This method enables the passing of data requests to the algorithm to be used during execution (in addition to bringing a particular port up-to-date). More...
|
| |
| virtual int | Update (vtkInformation *requests) |
| | Convenience method to update an algorithm after passing requests to its first output port. More...
|
| |
| virtual int | UpdatePiece (int piece, int numPieces, int ghostLevels, const int extents[6]=0) |
| | Convenience method to update an algorithm after passing requests to its first output port. More...
|
| |
| virtual int | UpdateExtent (const int extents[6]) |
| | Convenience method to update an algorithm after passing requests to its first output port. More...
|
| |
| virtual int | UpdateTimeStep (double time, int piece=-1, int numPieces=1, int ghostLevels=0, const int extents[6]=0) |
| | Convenience method to update an algorithm after passing requests to its first output port. More...
|
| |
| virtual void | UpdateInformation () |
| | Bring the algorithm's information up-to-date. More...
|
| |
| virtual void | UpdateDataObject () |
| | Create output object(s). More...
|
| |
| virtual void | PropagateUpdateExtent () |
| | Propagate meta-data upstream. More...
|
| |
| virtual void | UpdateWholeExtent () |
| | Bring this algorithm's outputs up-to-date. More...
|
| |
| void | ConvertTotalInputToPortConnection (int ind, int &port, int &conn) |
| | Convenience routine to convert from a linear ordering of input connections to a port/connection pair. More...
|
| |
| int | SetUpdateExtentToWholeExtent (int port) |
| | If the whole output extent is required, this method can be called to set the output update extent to the whole extent. More...
|
| |
| int | SetUpdateExtentToWholeExtent () |
| | Convenience function equivalent to SetUpdateExtentToWholeExtent(0) This method assumes that the whole extent is known (that UpdateInformation has been called). More...
|
| |
| void | SetUpdateExtent (int port, int piece, int numPieces, int ghostLevel) |
| | Set the output update extent in terms of piece and ghost levels. More...
|
| |
| void | SetUpdateExtent (int piece, int numPieces, int ghostLevel) |
| | Convenience function equivalent to SetUpdateExtent(0, piece, numPieces, ghostLevel) More...
|
| |
| void | SetUpdateExtent (int port, int extent[6]) |
| | Set the output update extent for data objects that use 3D extents. More...
|
| |
| void | SetUpdateExtent (int extent[6]) |
| | Convenience function equivalent to SetUpdateExtent(0, extent) More...
|
| |
| virtual vtkInformation * | GetInformation () |
| | Set/Get the information object associated with this algorithm. More...
|
| |
| virtual void | SetInformation (vtkInformation *) |
| | Set/Get the information object associated with this algorithm. More...
|
| |
| void | Register (vtkObjectBase *o) override |
| | Participate in garbage collection. More...
|
| |
| void | UnRegister (vtkObjectBase *o) override |
| | Participate in garbage collection. More...
|
| |
| virtual void | SetAbortExecute (int) |
| | Set/Get the AbortExecute flag for the process object. More...
|
| |
| virtual int | GetAbortExecute () |
| | Set/Get the AbortExecute flag for the process object. More...
|
| |
| virtual void | AbortExecuteOn () |
| | Set/Get the AbortExecute flag for the process object. More...
|
| |
| virtual void | AbortExecuteOff () |
| | Set/Get the AbortExecute flag for the process object. More...
|
| |
| virtual void | SetProgress (double) |
| | Set/Get the execution progress of a process object. More...
|
| |
| virtual double | GetProgress () |
| | Set/Get the execution progress of a process object. More...
|
| |
| void | SetProgressText (const char *ptext) |
| | Set the current text message associated with the progress state. More...
|
| |
| virtual char * | GetProgressText () |
| | Set the current text message associated with the progress state. More...
|
| |
| virtual unsigned long | GetErrorCode () |
| | The error code contains a possible error that occurred while reading or writing the file. More...
|
| |
| virtual void | SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, const char *name) |
| | Set the input data arrays that this algorithm will process. More...
|
| |
| virtual void | SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, int fieldAttributeType) |
| | Set the input data arrays that this algorithm will process. More...
|
| |
| virtual void | SetInputArrayToProcess (int idx, vtkInformation *info) |
| | Set the input data arrays that this algorithm will process. More...
|
| |
| virtual void | SetInputConnection (int port, vtkAlgorithmOutput *input) |
| | Set the connection for the given input port index. More...
|
| |
| virtual void | SetInputConnection (vtkAlgorithmOutput *input) |
| | Set the connection for the given input port index. More...
|
| |
| virtual void | AddInputConnection (int port, vtkAlgorithmOutput *input) |
| | Add a connection to the given input port index. More...
|
| |
| virtual void | AddInputConnection (vtkAlgorithmOutput *input) |
| | Add a connection to the given input port index. More...
|
| |
| virtual void | Update (int port) |
| | Bring this algorithm's outputs up-to-date. More...
|
| |
| virtual void | SetReleaseDataFlag (int) |
| | Turn release data flag on or off for all output ports. More...
|
| |
| virtual int | GetReleaseDataFlag () |
| | Turn release data flag on or off for all output ports. More...
|
| |
| void | ReleaseDataFlagOn () |
| | Turn release data flag on or off for all output ports. More...
|
| |
| void | ReleaseDataFlagOff () |
| | Turn release data flag on or off for all output ports. More...
|
| |
| int | UpdateExtentIsEmpty (vtkInformation *pinfo, vtkDataObject *output) |
| | This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. More...
|
| |
| int | UpdateExtentIsEmpty (vtkInformation *pinfo, int extentType) |
| | This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. More...
|
| |
| int * | GetUpdateExtent () |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| int * | GetUpdateExtent (int port) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| void | GetUpdateExtent (int &x0, int &x1, int &y0, int &y1, int &z0, int &z1) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| void | GetUpdateExtent (int port, int &x0, int &x1, int &y0, int &y1, int &z0, int &z1) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| void | GetUpdateExtent (int extent[6]) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| void | GetUpdateExtent (int port, int extent[6]) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| int | GetUpdatePiece () |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdatePiece (int port) |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdateNumberOfPieces () |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdateNumberOfPieces (int port) |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdateGhostLevel () |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdateGhostLevel (int port) |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| void | SetProgressObserver (vtkProgressObserver *) |
| | If an ProgressObserver is set, the algorithm will report progress through it rather than directly. More...
|
| |
| virtual vtkProgressObserver * | GetProgressObserver () |
| | If an ProgressObserver is set, the algorithm will report progress through it rather than directly. More...
|
| |
| | vtkBaseTypeMacro (vtkObject, vtkObjectBase) |
| |
| virtual void | DebugOn () |
| | Turn debugging output on. More...
|
| |
| virtual void | DebugOff () |
| | Turn debugging output off. More...
|
| |
| bool | GetDebug () |
| | Get the value of the debug flag. More...
|
| |
| void | SetDebug (bool debugFlag) |
| | Set the value of the debug flag. More...
|
| |
| virtual void | Modified () |
| | Update the modification time for this object. More...
|
| |
| void | RemoveObserver (unsigned long tag) |
| |
| void | RemoveObservers (unsigned long event) |
| |
| void | RemoveObservers (const char *event) |
| |
| void | RemoveAllObservers () |
| |
| int | HasObserver (unsigned long event) |
| |
| int | HasObserver (const char *event) |
| |
| int | InvokeEvent (unsigned long event) |
| |
| int | InvokeEvent (const char *event) |
| |
| unsigned long | AddObserver (unsigned long event, vtkCommand *, float priority=0.0f) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| unsigned long | AddObserver (const char *event, vtkCommand *, float priority=0.0f) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| vtkCommand * | GetCommand (unsigned long tag) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| void | RemoveObserver (vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| void | RemoveObservers (unsigned long event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| void | RemoveObservers (const char *event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| int | HasObserver (unsigned long event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| int | HasObserver (const char *event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| template<class U , class T > |
| unsigned long | AddObserver (unsigned long event, U observer, void(T::*callback)(), float priority=0.0f) |
| | Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...
|
| |
| template<class U , class T > |
| unsigned long | AddObserver (unsigned long event, U observer, void(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f) |
| | Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...
|
| |
| template<class U , class T > |
| unsigned long | AddObserver (unsigned long event, U observer, bool(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f) |
| | Allow user to set the AbortFlagOn() with the return value of the callback method. More...
|
| |
| int | InvokeEvent (unsigned long event, void *callData) |
| | This method invokes an event and return whether the event was aborted or not. More...
|
| |
| int | InvokeEvent (const char *event, void *callData) |
| | This method invokes an event and return whether the event was aborted or not. More...
|
| |
| const char * | GetClassName () const |
| | Return the class name as a string. More...
|
| |
| virtual void | Delete () |
| | Delete a VTK object. More...
|
| |
| virtual void | FastDelete () |
| | Delete a reference to this object. More...
|
| |
| void | InitializeObjectBase () |
| |
| void | Print (ostream &os) |
| | Print an object to an ostream. More...
|
| |
| int | GetReferenceCount () |
| | Return the current reference count of this object. More...
|
| |
| void | SetReferenceCount (int) |
| | Sets the reference count. More...
|
| |
| void | PrintRevisions (ostream &) |
| | Legacy. More...
|
| |
| virtual void | PrintHeader (ostream &os, vtkIndent indent) |
| | Methods invoked by print to print information about the object including superclasses. More...
|
| |
| virtual void | PrintTrailer (ostream &os, vtkIndent indent) |
| | Methods invoked by print to print information about the object including superclasses. More...
|
| |
|
| static vtkPistonMapper * | New () |
| |
| static int | IsTypeOf (const char *type) |
| |
| static vtkPistonMapper * | SafeDownCast (vtkObjectBase *o) |
| |
| static void | InitCudaGL (vtkRenderWindow *rw) |
| | Manually call this before any cuda filters are created to use direct GPU rendering. More...
|
| |
| static bool | IsEnabledCudaGL () |
| | Return true if using cuda interop feature otherwise false. More...
|
| |
| static int | IsTypeOf (const char *type) |
| |
| static vtkMapper * | SafeDownCast (vtkObjectBase *o) |
| |
| static void | ValueToColor (double value, double min, double scale, unsigned char *color) |
| | Convert a floating point value to an RGB triplet. More...
|
| |
| static void | ColorToValue (unsigned char *color, double min, double scale, double &value) |
| | Convert an RGB triplet to a floating point value. More...
|
| |
| static void | SetGlobalImmediateModeRendering (int val) |
| | Turn on/off flag to control whether data is rendered using immediate mode or note. More...
|
| |
| static void | GlobalImmediateModeRenderingOn () |
| | Turn on/off flag to control whether data is rendered using immediate mode or note. More...
|
| |
| static void | GlobalImmediateModeRenderingOff () |
| | Turn on/off flag to control whether data is rendered using immediate mode or note. More...
|
| |
| static int | GetGlobalImmediateModeRendering () |
| | Turn on/off flag to control whether data is rendered using immediate mode or note. More...
|
| |
| static void | SetResolveCoincidentTopology (int val) |
| | Set/Get a global flag that controls whether coincident topology (e.g., a line on top of a polygon) is shifted to avoid z-buffer resolution (and hence rendering problems). More...
|
| |
| static int | GetResolveCoincidentTopology () |
| | Set/Get a global flag that controls whether coincident topology (e.g., a line on top of a polygon) is shifted to avoid z-buffer resolution (and hence rendering problems). More...
|
| |
| static void | SetResolveCoincidentTopologyToDefault () |
| | Set/Get a global flag that controls whether coincident topology (e.g., a line on top of a polygon) is shifted to avoid z-buffer resolution (and hence rendering problems). More...
|
| |
| static void | SetResolveCoincidentTopologyToOff () |
| | Set/Get a global flag that controls whether coincident topology (e.g., a line on top of a polygon) is shifted to avoid z-buffer resolution (and hence rendering problems). More...
|
| |
| static void | SetResolveCoincidentTopologyToPolygonOffset () |
| | Set/Get a global flag that controls whether coincident topology (e.g., a line on top of a polygon) is shifted to avoid z-buffer resolution (and hence rendering problems). More...
|
| |
| static void | SetResolveCoincidentTopologyToShiftZBuffer () |
| | Set/Get a global flag that controls whether coincident topology (e.g., a line on top of a polygon) is shifted to avoid z-buffer resolution (and hence rendering problems). More...
|
| |
| static void | SetResolveCoincidentTopologyPolygonOffsetParameters (double factor, double units) |
| | Used to set the polygon offset scale factor and units. More...
|
| |
| static void | GetResolveCoincidentTopologyPolygonOffsetParameters (double &factor, double &units) |
| | Used to set the polygon offset scale factor and units. More...
|
| |
| static void | SetResolveCoincidentTopologyLineOffsetParameters (double factor, double units) |
| | Used to set the line offset scale factor and units. More...
|
| |
| static void | GetResolveCoincidentTopologyLineOffsetParameters (double &factor, double &units) |
| | Used to set the line offset scale factor and units. More...
|
| |
| static void | SetResolveCoincidentTopologyPointOffsetParameter (double units) |
| | Used to set the point offset value Used when ResolveCoincidentTopology is set to PolygonOffset. More...
|
| |
| static void | GetResolveCoincidentTopologyPointOffsetParameter (double &units) |
| | Used to set the point offset value Used when ResolveCoincidentTopology is set to PolygonOffset. More...
|
| |
| static void | SetResolveCoincidentTopologyPolygonOffsetFaces (int faces) |
| | Used when ResolveCoincidentTopology is set to PolygonOffset. More...
|
| |
| static int | GetResolveCoincidentTopologyPolygonOffsetFaces () |
| | Used when ResolveCoincidentTopology is set to PolygonOffset. More...
|
| |
| static void | SetResolveCoincidentTopologyZShift (double val) |
| | Used to set the z-shift if ResolveCoincidentTopology is set to ShiftZBuffer. More...
|
| |
| static double | GetResolveCoincidentTopologyZShift () |
| | Used to set the z-shift if ResolveCoincidentTopology is set to ShiftZBuffer. More...
|
| |
| static int | IsTypeOf (const char *type) |
| |
| static vtkAbstractMapper3D * | SafeDownCast (vtkObjectBase *o) |
| |
| static int | IsTypeOf (const char *type) |
| |
| static vtkAbstractMapper * | SafeDownCast (vtkObjectBase *o) |
| |
| static vtkDataArray * | GetScalars (vtkDataSet *input, int scalarMode, int arrayAccessMode, int arrayId, const char *arrayName, int &cellFlag) |
| | Internal helper function for getting the active scalars. More...
|
| |
| static vtkAbstractArray * | GetAbstractScalars (vtkDataSet *input, int scalarMode, int arrayAccessMode, int arrayId, const char *arrayName, int &cellFlag) |
| | Internal helper function for getting the active scalars as an abstract array. More...
|
| |
| static vtkAlgorithm * | New () |
| |
| static int | IsTypeOf (const char *type) |
| |
| static vtkAlgorithm * | SafeDownCast (vtkObjectBase *o) |
| |
| static vtkInformationIntegerKey * | INPUT_IS_OPTIONAL () |
| | Keys used to specify input port requirements. More...
|
| |
| static vtkInformationIntegerKey * | INPUT_IS_REPEATABLE () |
| |
| static vtkInformationInformationVectorKey * | INPUT_REQUIRED_FIELDS () |
| |
| static vtkInformationStringVectorKey * | INPUT_REQUIRED_DATA_TYPE () |
| |
| static vtkInformationInformationVectorKey * | INPUT_ARRAYS_TO_PROCESS () |
| |
| static vtkInformationIntegerKey * | INPUT_PORT () |
| |
| static vtkInformationIntegerKey * | INPUT_CONNECTION () |
| |
| static vtkInformationIntegerKey * | CAN_PRODUCE_SUB_EXTENT () |
| | This key tells the executive that a particular output port is capable of producing an arbitrary subextent of the whole extent. More...
|
| |
| static vtkInformationIntegerKey * | CAN_HANDLE_PIECE_REQUEST () |
| | Key that tells the pipeline that a particular algorithm can or cannot handle piece request. More...
|
| |
| static void | SetDefaultExecutivePrototype (vtkExecutive *proto) |
| | If the DefaultExecutivePrototype is set, a copy of it is created in CreateDefaultExecutive() using NewInstance(). More...
|
| |
| static vtkObject * | New () |
| | Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More...
|
| |
| static void | BreakOnError () |
| | This method is called when vtkErrorMacro executes. More...
|
| |
| static void | SetGlobalWarningDisplay (int val) |
| | This is a global flag that controls whether any debug, warning or error messages are displayed. More...
|
| |
| static void | GlobalWarningDisplayOn () |
| | This is a global flag that controls whether any debug, warning or error messages are displayed. More...
|
| |
| static void | GlobalWarningDisplayOff () |
| | This is a global flag that controls whether any debug, warning or error messages are displayed. More...
|
| |
| static int | GetGlobalWarningDisplay () |
| | This is a global flag that controls whether any debug, warning or error messages are displayed. More...
|
| |
| static vtkTypeBool | IsTypeOf (const char *name) |
| | Return 1 if this class type is the same type of (or a subclass of) the named class. More...
|
| |
| static vtkObjectBase * | New () |
| | Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More...
|
| |
Public Types inherited from vtkMapper