|
virtual vtkTypeBool | IsA (const char *type) |
| Return 1 if this class is the same type of (or a subclass of) the named class. More...
|
|
vtkXMLImageDataReader * | NewInstance () const |
|
void | PrintSelf (ostream &os, vtkIndent indent) override |
| Methods invoked by print to print information about the object including superclasses. More...
|
|
vtkImageData * | GetOutput () |
| Get the reader's output. More...
|
|
vtkImageData * | GetOutput (int idx) |
|
void | CopyOutputInformation (vtkInformation *outInfo, int port) override |
| For the specified port, copy the information this reader sets up in SetupOutputInformation to outInfo. More...
|
|
vtkXMLStructuredDataReader * | NewInstance () const |
|
void | PrintSelf (ostream &os, vtkIndent indent) override |
| Methods invoked by print to print information about the object including superclasses. More...
|
|
vtkIdType | GetNumberOfPoints () override |
| Get the number of points in the output. More...
|
|
vtkIdType | GetNumberOfCells () override |
| Get the number of cells in the output. More...
|
|
virtual void | SetWholeSlices (vtkTypeBool) |
| Get/Set whether the reader gets a whole slice from disk when only a rectangle inside it is needed. More...
|
|
virtual vtkTypeBool | GetWholeSlices () |
|
virtual void | WholeSlicesOn () |
|
virtual void | WholeSlicesOff () |
|
void | CopyOutputInformation (vtkInformation *outInfo, int port) override |
| For the specified port, copy the information this reader sets up in SetupOutputInformation to outInfo. More...
|
|
vtkXMLDataReader * | NewInstance () const |
|
void | CopyOutputInformation (vtkInformation *outInfo, int port) override |
|
vtkXMLReader * | NewInstance () const |
|
virtual void | SetFileName (const char *) |
| Get/Set the name of the input file. More...
|
|
virtual char * | GetFileName () |
|
virtual void | SetReadFromInputString (vtkTypeBool) |
| Enable reading from an InputString instead of the default, a file. More...
|
|
virtual vtkTypeBool | GetReadFromInputString () |
|
virtual void | ReadFromInputStringOn () |
|
virtual void | ReadFromInputStringOff () |
|
void | SetInputString (const std::string &s) |
|
virtual int | CanReadFile (const char *name) |
| Test whether the file (type) with the given name can be read by this reader. More...
|
|
vtkDataSet * | GetOutputAsDataSet () |
| Get the output as a vtkDataSet pointer. More...
|
|
vtkDataSet * | GetOutputAsDataSet (int index) |
|
virtual vtkDataArraySelection * | GetPointDataArraySelection () |
| Get the data array selection tables used to configure which data arrays are loaded by the reader. More...
|
|
virtual vtkDataArraySelection * | GetCellDataArraySelection () |
|
virtual vtkDataArraySelection * | GetColumnArraySelection () |
|
int | GetNumberOfPointArrays () |
| Get the number of point, cell or column arrays available in the input. More...
|
|
int | GetNumberOfCellArrays () |
|
int | GetNumberOfColumnArrays () |
|
int | GetNumberOfTimeDataArrays () const |
| Getters for time data array candidates. More...
|
|
const char * | GetTimeDataArray (int idx) const |
|
virtual vtkStringArray * | GetTimeDataStringArray () |
|
virtual char * | GetActiveTimeDataArrayName () |
| Setter / Getter on ActiveTimeDataArrayName. More...
|
|
virtual void | SetActiveTimeDataArrayName (const char *) |
|
const char * | GetPointArrayName (int index) |
| Get the name of the point, cell, column or time array with the given index in the input. More...
|
|
const char * | GetCellArrayName (int index) |
|
const char * | GetColumnArrayName (int index) |
|
int | GetPointArrayStatus (const char *name) |
| Get/Set whether the point, cell, column or time array with the given name is to be read. More...
|
|
int | GetCellArrayStatus (const char *name) |
|
void | SetPointArrayStatus (const char *name, int status) |
|
void | SetCellArrayStatus (const char *name, int status) |
|
int | GetColumnArrayStatus (const char *name) |
|
void | SetColumnArrayStatus (const char *name, int status) |
|
virtual void | CopyOutputInformation (vtkInformation *vtkNotUsed(outInfo), int vtkNotUsed(port)) |
|
virtual void | SetTimeStep (int) |
| Which TimeStep to read. More...
|
|
virtual int | GetTimeStep () |
|
virtual int | GetNumberOfTimeSteps () |
|
virtual int * | GetTimeStepRange () |
| Which TimeStepRange to read. More...
|
|
virtual void | GetTimeStepRange (int &, int &) |
|
virtual void | GetTimeStepRange (int[2]) |
|
virtual void | SetTimeStepRange (int, int) |
|
void | SetTimeStepRange (int[2]) |
|
vtkXMLDataParser * | GetXMLParser () |
| Returns the internal XML parser. More...
|
|
vtkTypeBool | ProcessRequest (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) override |
| Upstream/Downstream requests form the generalized interface through which executives invoke a algorithm's functionality. More...
|
|
void | SetReaderErrorObserver (vtkCommand *) |
| Set/get the ErrorObserver for the internal reader This is useful for applications that want to catch error messages. More...
|
|
virtual vtkCommand * | GetReaderErrorObserver () |
|
void | SetParserErrorObserver (vtkCommand *) |
| Set/get the ErrorObserver for the internal xml parser This is useful for applications that want to catch error messages. More...
|
|
virtual vtkCommand * | GetParserErrorObserver () |
|
vtkAlgorithm * | NewInstance () const |
|
int | HasExecutive () |
| Check whether this algorithm has an assigned executive. More...
|
|
vtkExecutive * | GetExecutive () |
| Get this algorithm's executive. More...
|
|
virtual void | SetExecutive (vtkExecutive *executive) |
| Set this algorithm's executive. More...
|
|
vtkTypeBool | ProcessRequest (vtkInformation *request, vtkCollection *inInfo, vtkInformationVector *outInfo) |
| Version of ProcessRequest() that is wrapped. More...
|
|
virtual int | ComputePipelineMTime (vtkInformation *request, vtkInformationVector **inInfoVec, vtkInformationVector *outInfoVec, int requestFromOutputPort, vtkMTimeType *mtime) |
| A special version of ProcessRequest meant specifically for the pipeline modified time request. More...
|
|
virtual int | ModifyRequest (vtkInformation *request, int when) |
| This method gives the algorithm a chance to modify the contents of a request before or after (specified in the when argument) it is forwarded. More...
|
|
vtkInformation * | GetInputPortInformation (int port) |
| Get the information object associated with an input port. More...
|
|
vtkInformation * | GetOutputPortInformation (int port) |
| Get the information object associated with an output port. More...
|
|
virtual vtkInformation * | GetInformation () |
| Set/Get the information object associated with this algorithm. More...
|
|
virtual void | SetInformation (vtkInformation *) |
|
int | GetNumberOfInputPorts () |
| Get the number of input ports used by the algorithm. More...
|
|
int | GetNumberOfOutputPorts () |
| Get the number of output ports provided by the algorithm. More...
|
|
void | Register (vtkObjectBase *o) override |
| Participate in garbage collection. More...
|
|
void | UnRegister (vtkObjectBase *o) override |
| Decrease the reference count (release by another object). More...
|
|
virtual void | SetAbortExecute (vtkTypeBool) |
| Set/Get the AbortExecute flag for the process object. More...
|
|
virtual vtkTypeBool | GetAbortExecute () |
|
virtual void | AbortExecuteOn () |
|
virtual void | AbortExecuteOff () |
|
virtual double | GetProgress () |
| Get the execution progress of a process object. More...
|
|
void | SetProgress (double) |
| SetProgress is deprecated. More...
|
|
void | UpdateProgress (double amount) |
| Update the progress of the process object. More...
|
|
void | SetProgressShiftScale (double shift, double scale) |
| Specify the shift and scale values to use to apply to the progress amount when UpdateProgress is called. More...
|
|
virtual double | GetProgressShift () |
|
virtual double | GetProgressScale () |
|
void | SetProgressText (const char *ptext) |
| Set the current text message associated with the progress state. More...
|
|
virtual char * | GetProgressText () |
|
virtual unsigned long | GetErrorCode () |
| The error code contains a possible error that occurred while reading or writing the file. More...
|
|
virtual void | SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, const char *name) |
| Set the input data arrays that this algorithm will process. More...
|
|
virtual void | SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, int fieldAttributeType) |
|
virtual void | SetInputArrayToProcess (int idx, vtkInformation *info) |
|
virtual void | SetInputArrayToProcess (int idx, int port, int connection, const char *fieldAssociation, const char *attributeTypeorName) |
| String based versions of SetInputArrayToProcess(). More...
|
|
vtkInformation * | GetInputArrayInformation (int idx) |
| Get the info object for the specified input array to this algorithm. More...
|
|
void | RemoveAllInputs () |
| Remove all the input data. More...
|
|
vtkDataObject * | GetOutputDataObject (int port) |
| Get the data object that will contain the algorithm output for the given port. More...
|
|
vtkDataObject * | GetInputDataObject (int port, int connection) |
| Get the data object that will contain the algorithm input for the given port and given connection. More...
|
|
virtual void | SetInputConnection (int port, vtkAlgorithmOutput *input) |
| Set the connection for the given input port index. More...
|
|
virtual void | SetInputConnection (vtkAlgorithmOutput *input) |
|
virtual void | AddInputConnection (int port, vtkAlgorithmOutput *input) |
| Add a connection to the given input port index. More...
|
|
virtual void | AddInputConnection (vtkAlgorithmOutput *input) |
|
virtual void | RemoveInputConnection (int port, vtkAlgorithmOutput *input) |
| Remove a connection from the given input port index. More...
|
|
virtual void | RemoveInputConnection (int port, int idx) |
| Remove a connection given by index idx. More...
|
|
virtual void | RemoveAllInputConnections (int port) |
| Removes all input connections. More...
|
|
virtual void | SetInputDataObject (int port, vtkDataObject *data) |
| Sets the data-object as an input on the given port index. More...
|
|
virtual void | SetInputDataObject (vtkDataObject *data) |
|
virtual void | AddInputDataObject (int port, vtkDataObject *data) |
| Add the data-object as an input to this given port. More...
|
|
virtual void | AddInputDataObject (vtkDataObject *data) |
|
vtkAlgorithmOutput * | GetOutputPort (int index) |
| Get a proxy object corresponding to the given output port of this algorithm. More...
|
|
vtkAlgorithmOutput * | GetOutputPort () |
|
int | GetNumberOfInputConnections (int port) |
| Get the number of inputs currently connected to a port. More...
|
|
int | GetTotalNumberOfInputConnections () |
| Get the total number of inputs for this algorithm. More...
|
|
vtkAlgorithmOutput * | GetInputConnection (int port, int index) |
| Get the algorithm output port connected to an input port. More...
|
|
vtkAlgorithm * | GetInputAlgorithm (int port, int index, int &algPort) |
| Returns the algorithm and the output port index of that algorithm connected to a port-index pair. More...
|
|
vtkAlgorithm * | GetInputAlgorithm (int port, int index) |
| Returns the algorithm connected to a port-index pair. More...
|
|
vtkAlgorithm * | GetInputAlgorithm () |
| Equivalent to GetInputAlgorithm(0, 0). More...
|
|
vtkExecutive * | GetInputExecutive (int port, int index) |
| Returns the executive associated with a particular input connection. More...
|
|
vtkExecutive * | GetInputExecutive () |
| Equivalent to GetInputExecutive(0, 0) More...
|
|
vtkInformation * | GetInputInformation (int port, int index) |
| Return the information object that is associated with a particular input connection. More...
|
|
vtkInformation * | GetInputInformation () |
| Equivalent to GetInputInformation(0, 0) More...
|
|
vtkInformation * | GetOutputInformation (int port) |
| Return the information object that is associated with a particular output port. More...
|
|
virtual void | Update (int port) |
| Bring this algorithm's outputs up-to-date. More...
|
|
virtual void | Update () |
|
virtual vtkTypeBool | Update (int port, vtkInformationVector *requests) |
| This method enables the passing of data requests to the algorithm to be used during execution (in addition to bringing a particular port up-to-date). More...
|
|
virtual vtkTypeBool | Update (vtkInformation *requests) |
| Convenience method to update an algorithm after passing requests to its first output port. More...
|
|
virtual int | UpdatePiece (int piece, int numPieces, int ghostLevels, const int extents[6]=nullptr) |
| Convenience method to update an algorithm after passing requests to its first output port. More...
|
|
virtual int | UpdateExtent (const int extents[6]) |
| Convenience method to update an algorithm after passing requests to its first output port. More...
|
|
virtual int | UpdateTimeStep (double time, int piece=-1, int numPieces=1, int ghostLevels=0, const int extents[6]=nullptr) |
| Convenience method to update an algorithm after passing requests to its first output port. More...
|
|
virtual void | UpdateInformation () |
| Bring the algorithm's information up-to-date. More...
|
|
virtual void | UpdateDataObject () |
| Create output object(s). More...
|
|
virtual void | PropagateUpdateExtent () |
| Propagate meta-data upstream. More...
|
|
virtual void | UpdateWholeExtent () |
| Bring this algorithm's outputs up-to-date. More...
|
|
void | ConvertTotalInputToPortConnection (int ind, int &port, int &conn) |
| Convenience routine to convert from a linear ordering of input connections to a port/connection pair. More...
|
|
virtual void | SetReleaseDataFlag (int) |
| Turn release data flag on or off for all output ports. More...
|
|
virtual int | GetReleaseDataFlag () |
|
void | ReleaseDataFlagOn () |
|
void | ReleaseDataFlagOff () |
|
int | UpdateExtentIsEmpty (vtkInformation *pinfo, vtkDataObject *output) |
| This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. More...
|
|
int | UpdateExtentIsEmpty (vtkInformation *pinfo, int extentType) |
|
int * | GetUpdateExtent () |
| These functions return the update extent for output ports that use 3D extents. More...
|
|
int * | GetUpdateExtent (int port) |
|
void | GetUpdateExtent (int &x0, int &x1, int &y0, int &y1, int &z0, int &z1) |
|
void | GetUpdateExtent (int port, int &x0, int &x1, int &y0, int &y1, int &z0, int &z1) |
|
void | GetUpdateExtent (int extent[6]) |
|
void | GetUpdateExtent (int port, int extent[6]) |
|
int | GetUpdatePiece () |
| These functions return the update extent for output ports that use piece extents. More...
|
|
int | GetUpdatePiece (int port) |
|
int | GetUpdateNumberOfPieces () |
|
int | GetUpdateNumberOfPieces (int port) |
|
int | GetUpdateGhostLevel () |
|
int | GetUpdateGhostLevel (int port) |
|
void | SetProgressObserver (vtkProgressObserver *) |
| If an ProgressObserver is set, the algorithm will report progress through it rather than directly. More...
|
|
virtual vtkProgressObserver * | GetProgressObserver () |
|
| vtkBaseTypeMacro (vtkObject, vtkObjectBase) |
|
virtual void | DebugOn () |
| Turn debugging output on. More...
|
|
virtual void | DebugOff () |
| Turn debugging output off. More...
|
|
bool | GetDebug () |
| Get the value of the debug flag. More...
|
|
void | SetDebug (bool debugFlag) |
| Set the value of the debug flag. More...
|
|
virtual void | Modified () |
| Update the modification time for this object. More...
|
|
virtual vtkMTimeType | GetMTime () |
| Return this object's modified time. More...
|
|
unsigned long | AddObserver (unsigned long event, vtkCommand *, float priority=0.0f) |
| Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
|
unsigned long | AddObserver (const char *event, vtkCommand *, float priority=0.0f) |
|
vtkCommand * | GetCommand (unsigned long tag) |
|
void | RemoveObserver (vtkCommand *) |
|
void | RemoveObservers (unsigned long event, vtkCommand *) |
|
void | RemoveObservers (const char *event, vtkCommand *) |
|
vtkTypeBool | HasObserver (unsigned long event, vtkCommand *) |
|
vtkTypeBool | HasObserver (const char *event, vtkCommand *) |
|
void | RemoveObserver (unsigned long tag) |
|
void | RemoveObservers (unsigned long event) |
|
void | RemoveObservers (const char *event) |
|
void | RemoveAllObservers () |
|
vtkTypeBool | HasObserver (unsigned long event) |
|
vtkTypeBool | HasObserver (const char *event) |
|
template<class U , class T > |
unsigned long | AddObserver (unsigned long event, U observer, void(T::*callback)(), float priority=0.0f) |
| Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...
|
|
template<class U , class T > |
unsigned long | AddObserver (unsigned long event, U observer, void(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f) |
|
template<class U , class T > |
unsigned long | AddObserver (unsigned long event, U observer, bool(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f) |
| Allow user to set the AbortFlagOn() with the return value of the callback method. More...
|
|
int | InvokeEvent (unsigned long event, void *callData) |
| This method invokes an event and return whether the event was aborted or not. More...
|
|
int | InvokeEvent (const char *event, void *callData) |
|
int | InvokeEvent (unsigned long event) |
|
int | InvokeEvent (const char *event) |
|
const char * | GetClassName () const |
| Return the class name as a string. More...
|
|
virtual vtkIdType | GetNumberOfGenerationsFromBase (const char *name) |
| Given the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). More...
|
|
virtual void | Delete () |
| Delete a VTK object. More...
|
|
virtual void | FastDelete () |
| Delete a reference to this object. More...
|
|
void | InitializeObjectBase () |
|
void | Print (ostream &os) |
| Print an object to an ostream. More...
|
|
virtual void | PrintHeader (ostream &os, vtkIndent indent) |
|
virtual void | PrintTrailer (ostream &os, vtkIndent indent) |
|
int | GetReferenceCount () |
| Return the current reference count of this object. More...
|
|
void | SetReferenceCount (int) |
| Sets the reference count. More...
|
|
bool | GetIsInMemkind () const |
| A local state flag that remembers whether this object lives in the normal or extended memory space. More...
|
|
|
virtual vtkObjectBase * | NewInstanceInternal () const |
|
| vtkXMLImageDataReader () |
|
| ~vtkXMLImageDataReader () override |
|
const char * | GetDataSetName () override |
|
void | SetOutputExtent (int *extent) override |
|
int | ReadPrimaryElement (vtkXMLDataElement *ePrimary) override |
|
void | SetupOutputInformation (vtkInformation *outInfo) override |
|
int | FillOutputPortInformation (int, vtkInformation *) override |
| Fill the output port information objects for this algorithm. More...
|
|
| vtkXMLStructuredDataReader () |
|
| ~vtkXMLStructuredDataReader () override |
|
int | ReadPrimaryElement (vtkXMLDataElement *ePrimary) override |
|
void | ReadXMLData () override |
|
void | SetupOutputInformation (vtkInformation *outInfo) override |
|
void | SetupEmptyOutput () override |
|
void | SetupPieces (int numPieces) override |
|
void | DestroyPieces () override |
|
int | ReadArrayForPoints (vtkXMLDataElement *da, vtkAbstractArray *outArray) override |
|
int | ReadArrayForCells (vtkXMLDataElement *da, vtkAbstractArray *outArray) override |
|
int | ReadPiece (vtkXMLDataElement *ePiece) override |
|
virtual int | ReadSubExtent (int *inExtent, int *inDimensions, vtkIdType *inIncrements, int *outExtent, int *outDimensions, vtkIdType *outIncrements, int *subExtent, int *subDimensions, vtkXMLDataElement *da, vtkAbstractArray *array, FieldType type) |
|
| vtkXMLDataReader () |
|
| ~vtkXMLDataReader () override |
|
void | CreateXMLParser () override |
|
void | DestroyXMLParser () override |
|
void | SetupOutputInformation (vtkInformation *outInfo) override |
|
void | SetupOutputData () override |
|
int | ReadPiece (vtkXMLDataElement *ePiece, int piece) |
|
int | ReadPieceData (int piece) |
|
virtual int | ReadPieceData () |
|
virtual void | DataProgressCallback () |
|
| vtkXMLReader () |
|
| ~vtkXMLReader () override |
|
virtual int | ReadXMLInformation () |
|
virtual int | CanReadFileVersion (int major, int minor) |
|
virtual void | SetupOutputInformation (vtkInformation *vtkNotUsed(outInfo)) |
|
virtual int | ReadVTKFile (vtkXMLDataElement *eVTKFile) |
|
int | GetLocalDataType (vtkXMLDataElement *da, int datatype) |
| If the IdType argument is present in the provided XMLDataElement and the provided dataType has the same size with VTK_ID_TYPE on this build of VTK, returns VTK_ID_TYPE. More...
|
|
vtkAbstractArray * | CreateArray (vtkXMLDataElement *da) |
|
int | CreateInformationKey (vtkXMLDataElement *eInfoKey, vtkInformation *info) |
|
bool | ReadInformation (vtkXMLDataElement *infoRoot, vtkInformation *info) |
|
virtual int | OpenStream () |
|
virtual void | CloseStream () |
|
virtual int | OpenVTKFile () |
|
virtual void | CloseVTKFile () |
|
virtual int | OpenVTKString () |
|
virtual void | CloseVTKString () |
|
void | SetupCompressor (const char *type) |
|
int | CanReadFileVersionString (const char *version) |
|
virtual int | CanReadFileWithDataType (const char *dsname) |
| This method is used by CanReadFile() to check if the reader can read an XML with the primary element with the given name. More...
|
|
virtual int | GetFileMajorVersion () |
|
virtual int | GetFileMinorVersion () |
|
int | IntersectExtents (int *extent1, int *extent2, int *result) |
|
int | Min (int a, int b) |
|
int | Max (int a, int b) |
|
void | ComputePointDimensions (int *extent, int *dimensions) |
|
void | ComputePointIncrements (int *extent, vtkIdType *increments) |
|
void | ComputeCellDimensions (int *extent, int *dimensions) |
|
void | ComputeCellIncrements (int *extent, vtkIdType *increments) |
|
vtkIdType | GetStartTuple (int *extent, vtkIdType *increments, int i, int j, int k) |
|
void | ReadAttributeIndices (vtkXMLDataElement *eDSA, vtkDataSetAttributes *dsa) |
|
char ** | CreateStringArray (int numStrings) |
|
void | DestroyStringArray (int numStrings, char **strings) |
|
virtual int | ReadArrayValues (vtkXMLDataElement *da, vtkIdType arrayIndex, vtkAbstractArray *array, vtkIdType startIndex, vtkIdType numValues, FieldType type=OTHER) |
|
void | SetDataArraySelections (vtkXMLDataElement *eDSA, vtkDataArraySelection *sel) |
|
int | SetFieldDataInfo (vtkXMLDataElement *eDSA, int association, vtkIdType numTuples, vtkInformationVector *(&infoVector)) |
|
int | PointDataArrayIsEnabled (vtkXMLDataElement *ePDA) |
|
int | CellDataArrayIsEnabled (vtkXMLDataElement *eCDA) |
|
virtual void | SqueezeOutputArrays (vtkDataObject *) |
|
void | MarkIdTypeArrays (vtkXMLDataElement *da) |
| XML files have not consistently saved out adequate meta-data in past to correctly create vtkIdTypeArray for global ids and pedigree ids. More...
|
|
virtual void | GetProgressRange (float *range) |
|
virtual void | SetProgressRange (const float range[2], int curStep, int numSteps) |
|
virtual void | SetProgressRange (const float range[2], int curStep, const float *fractions) |
|
virtual void | UpdateProgressDiscrete (float progress) |
|
virtual int | RequestData (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) |
|
virtual int | RequestDataObject (vtkInformation *vtkNotUsed(request), vtkInformationVector **vtkNotUsed(inputVector), vtkInformationVector *vtkNotUsed(outputVector)) |
|
virtual int | RequestInformation (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) |
|
void | SetNumberOfTimeSteps (int num) |
|
vtkDataObject * | GetCurrentOutput () |
|
vtkInformation * | GetCurrentOutputInformation () |
|
void | ReadFieldData () |
|
| vtkAlgorithm () |
|
| ~vtkAlgorithm () override |
|
virtual int | FillInputPortInformation (int port, vtkInformation *info) |
| Fill the input port information objects for this algorithm. More...
|
|
virtual void | SetNumberOfInputPorts (int n) |
| Set the number of input ports used by the algorithm. More...
|
|
virtual void | SetNumberOfOutputPorts (int n) |
| Set the number of output ports provided by the algorithm. More...
|
|
int | InputPortIndexInRange (int index, const char *action) |
|
int | OutputPortIndexInRange (int index, const char *action) |
|
int | GetInputArrayAssociation (int idx, vtkInformationVector **inputVector) |
| Get the assocition of the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
|
|
int | GetInputArrayAssociation (int idx, int connection, vtkInformationVector **inputVector) |
| Filters that have multiple connections on one port can use this signature. More...
|
|
int | GetInputArrayAssociation (int idx, vtkDataObject *input) |
|
vtkDataArray * | GetInputArrayToProcess (int idx, vtkInformationVector **inputVector) |
| Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
|
|
vtkDataArray * | GetInputArrayToProcess (int idx, vtkInformationVector **inputVector, int &association) |
|
vtkDataArray * | GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector) |
| Filters that have multiple connections on one port can use this signature. More...
|
|
vtkDataArray * | GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association) |
|
vtkDataArray * | GetInputArrayToProcess (int idx, vtkDataObject *input) |
|
vtkDataArray * | GetInputArrayToProcess (int idx, vtkDataObject *input, int &association) |
|
vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector) |
| Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
|
|
vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector, int &association) |
|
vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector) |
| Filters that have multiple connections on one port can use this signature. More...
|
|
vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association) |
|
vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkDataObject *input) |
|
vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkDataObject *input, int &association) |
|
vtkInformation * | GetInputArrayFieldInformation (int idx, vtkInformationVector **inputVector) |
| This method takes in an index (as specified in SetInputArrayToProcess) and a pipeline information vector. More...
|
|
virtual vtkExecutive * | CreateDefaultExecutive () |
| Create a default executive. More...
|
|
virtual void | SetErrorCode (unsigned long) |
| The error code contains a possible error that occurred while reading or writing the file. More...
|
|
void | ReportReferences (vtkGarbageCollector *) override |
|
virtual void | SetNthInputConnection (int port, int index, vtkAlgorithmOutput *input) |
| Replace the Nth connection on the given input port. More...
|
|
virtual void | SetNumberOfInputConnections (int port, int n) |
| Set the number of input connections on the given input port. More...
|
|
void | SetInputDataInternal (int port, vtkDataObject *input) |
| These methods are used by subclasses to implement methods to set data objects directly as input. More...
|
|
void | AddInputDataInternal (int port, vtkDataObject *input) |
|
| vtkObject () |
|
| ~vtkObject () override |
|
void | RegisterInternal (vtkObjectBase *, vtkTypeBool check) override |
|
void | UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) override |
|
void | InternalGrabFocus (vtkCommand *mouseEvents, vtkCommand *keypressEvents=nullptr) |
| These methods allow a command to exclusively grab all events. More...
|
|
void | InternalReleaseFocus () |
|
| vtkObjectBase () |
|
virtual | ~vtkObjectBase () |
|
| vtkObjectBase (const vtkObjectBase &) |
|
void | operator= (const vtkObjectBase &) |
|