|
| virtual vtkTypeBool | IsA (const char *type) |
| | Return 1 if this class is the same type of (or a subclass of) the named class.
|
| |
| vtkXMLStructuredDataReader * | NewInstance () const |
| |
| void | PrintSelf (ostream &os, vtkIndent indent) override |
| | Methods invoked by print to print information about the object including superclasses.
|
| |
| vtkIdType | GetNumberOfPoints () override |
| | Get the number of points in the output.
|
| |
| vtkIdType | GetNumberOfCells () override |
| | Get the number of cells in the output.
|
| |
| void | CopyOutputInformation (vtkInformation *outInfo, int port) override |
| | For the specified port, copy the information this reader sets up in SetupOutputInformation to outInfo.
|
| |
|
| virtual void | SetWholeSlices (vtkTypeBool) |
| | Get/Set whether the reader gets a whole slice from disk when only a rectangle inside it is needed.
|
| |
| virtual vtkTypeBool | GetWholeSlices () |
| | Get/Set whether the reader gets a whole slice from disk when only a rectangle inside it is needed.
|
| |
| virtual void | WholeSlicesOn () |
| | Get/Set whether the reader gets a whole slice from disk when only a rectangle inside it is needed.
|
| |
| virtual void | WholeSlicesOff () |
| | Get/Set whether the reader gets a whole slice from disk when only a rectangle inside it is needed.
|
| |
| virtual vtkTypeBool | IsA (const char *type) |
| | Return 1 if this class is the same type of (or a subclass of) the named class.
|
| |
| vtkXMLDataReader * | NewInstance () const |
| |
| void | PrintSelf (ostream &os, vtkIndent indent) override |
| | Methods invoked by print to print information about the object including superclasses.
|
| |
| virtual vtkIdType | GetNumberOfPoints ()=0 |
| | Get the number of points in the output.
|
| |
| virtual vtkIdType | GetNumberOfCells ()=0 |
| | Get the number of cells in the output.
|
| |
| void | CopyOutputInformation (vtkInformation *outInfo, int port) override |
| |
| virtual vtkTypeBool | IsA (const char *type) |
| | Return 1 if this class is the same type of (or a subclass of) the named class.
|
| |
| vtkXMLReader * | NewInstance () const |
| |
| void | PrintSelf (ostream &os, vtkIndent indent) override |
| | Methods invoked by print to print information about the object including superclasses.
|
| |
| virtual int | CanReadFile (VTK_FILEPATH const char *name) |
| | Test whether the file (type) with the given name can be read by this reader.
|
| |
| virtual void | CopyOutputInformation (vtkInformation *vtkNotUsed(outInfo), int vtkNotUsed(port)) |
| |
| virtual int | GetNumberOfTimeSteps () |
| |
| vtkXMLDataParser * | GetXMLParser () |
| | Returns the internal XML parser.
|
| |
| vtkTypeBool | ProcessRequest (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) override |
| | Upstream/Downstream requests form the generalized interface through which executives invoke a algorithm's functionality.
|
| |
| | vtkSetFilePathMacro (FileName) |
| | Get/Set the name of the input file.
|
| |
| | vtkGetFilePathMacro (FileName) |
| | Get/Set the name of the input file.
|
| |
| virtual void | SetReadFromInputString (vtkTypeBool) |
| | Enable reading from an InputString instead of the default, a file.
|
| |
| virtual vtkTypeBool | GetReadFromInputString () |
| | Enable reading from an InputString instead of the default, a file.
|
| |
| virtual void | ReadFromInputStringOn () |
| | Enable reading from an InputString instead of the default, a file.
|
| |
| virtual void | ReadFromInputStringOff () |
| | Enable reading from an InputString instead of the default, a file.
|
| |
| void | SetInputString (const char *in) |
| | Specify the InputString for use when reading from a character array.
|
| |
| void | SetInputString (const char *in, int len) |
| | Enable reading from an InputString instead of the default, a file.
|
| |
| void | SetBinaryInputString (const char *, int len) |
| | Enable reading from an InputString instead of the default, a file.
|
| |
| void | SetInputString (const std::string &input) |
| | Enable reading from an InputString instead of the default, a file.
|
| |
| virtual void | SetInputArray (vtkCharArray *) |
| | Specify the vtkCharArray to be used when reading from a string.
|
| |
| vtkDataSet * | GetOutputAsDataSet () |
| | Get the output as a vtkDataSet pointer.
|
| |
| vtkDataSet * | GetOutputAsDataSet (int index) |
| | Get the output as a vtkDataSet pointer.
|
| |
| virtual vtkDataArraySelection * | GetPointDataArraySelection () |
| | Get the data array selection tables used to configure which data arrays are loaded by the reader.
|
| |
| virtual vtkDataArraySelection * | GetCellDataArraySelection () |
| | Get the data array selection tables used to configure which data arrays are loaded by the reader.
|
| |
| virtual vtkDataArraySelection * | GetColumnArraySelection () |
| | Get the data array selection tables used to configure which data arrays are loaded by the reader.
|
| |
| int | GetNumberOfPointArrays () |
| | Get the number of point, cell or column arrays available in the input.
|
| |
| int | GetNumberOfCellArrays () |
| | Get the number of point, cell or column arrays available in the input.
|
| |
| int | GetNumberOfColumnArrays () |
| | Get the number of point, cell or column arrays available in the input.
|
| |
| int | GetNumberOfTimeDataArrays () const |
| | Getters for time data array candidates.
|
| |
| const char * | GetTimeDataArray (int idx) const |
| | Getters for time data array candidates.
|
| |
| virtual vtkStringArray * | GetTimeDataStringArray () |
| | Getters for time data array candidates.
|
| |
| virtual char * | GetActiveTimeDataArrayName () |
| | Setter / Getter on ActiveTimeDataArrayName.
|
| |
| virtual void | SetActiveTimeDataArrayName (const char *) |
| | Setter / Getter on ActiveTimeDataArrayName.
|
| |
| const char * | GetPointArrayName (int index) |
| | Get the name of the point, cell, column or time array with the given index in the input.
|
| |
| const char * | GetCellArrayName (int index) |
| | Get the name of the point, cell, column or time array with the given index in the input.
|
| |
| const char * | GetColumnArrayName (int index) |
| | Get the name of the point, cell, column or time array with the given index in the input.
|
| |
| int | GetPointArrayStatus (const char *name) |
| | Get/Set whether the point, cell, column or time array with the given name is to be read.
|
| |
| int | GetCellArrayStatus (const char *name) |
| | Get/Set whether the point, cell, column or time array with the given name is to be read.
|
| |
| void | SetPointArrayStatus (const char *name, int status) |
| | Get/Set whether the point, cell, column or time array with the given name is to be read.
|
| |
| void | SetCellArrayStatus (const char *name, int status) |
| | Get/Set whether the point, cell, column or time array with the given name is to be read.
|
| |
| int | GetColumnArrayStatus (const char *name) |
| | Get/Set whether the point, cell, column or time array with the given name is to be read.
|
| |
| void | SetColumnArrayStatus (const char *name, int status) |
| | Get/Set whether the point, cell, column or time array with the given name is to be read.
|
| |
| virtual void | SetTimeStep (int) |
| | Which TimeStep to read.
|
| |
| virtual int | GetTimeStep () |
| | Which TimeStep to read.
|
| |
| virtual int * | GetTimeStepRange () |
| | Which TimeStepRange to read.
|
| |
| virtual void | GetTimeStepRange (int &, int &) |
| | Which TimeStepRange to read.
|
| |
| virtual void | GetTimeStepRange (int[2]) |
| | Which TimeStepRange to read.
|
| |
| virtual void | SetTimeStepRange (int, int) |
| | Which TimeStepRange to read.
|
| |
| void | SetTimeStepRange (int[2]) |
| | Which TimeStepRange to read.
|
| |
| void | SetReaderErrorObserver (vtkCommand *) |
| | Set/get the ErrorObserver for the internal reader This is useful for applications that want to catch error messages.
|
| |
| virtual vtkCommand * | GetReaderErrorObserver () |
| | Set/get the ErrorObserver for the internal reader This is useful for applications that want to catch error messages.
|
| |
| void | SetParserErrorObserver (vtkCommand *) |
| | Set/get the ErrorObserver for the internal xml parser This is useful for applications that want to catch error messages.
|
| |
| virtual vtkCommand * | GetParserErrorObserver () |
| | Set/get the ErrorObserver for the internal xml parser This is useful for applications that want to catch error messages.
|
| |
| virtual vtkTypeBool | IsA (const char *type) |
| | Return 1 if this class is the same type of (or a subclass of) the named class.
|
| |
| vtkAlgorithm * | NewInstance () const |
| |
| void | PrintSelf (ostream &os, vtkIndent indent) override |
| | Methods invoked by print to print information about the object including superclasses.
|
| |
| vtkTypeBool | HasExecutive () |
| | Check whether this algorithm has an assigned executive.
|
| |
| vtkExecutive * | GetExecutive () |
| | Get this algorithm's executive.
|
| |
| virtual void | SetExecutive (vtkExecutive *executive) |
| | Set this algorithm's executive.
|
| |
| virtual vtkTypeBool | ProcessRequest (vtkInformation *request, vtkInformationVector **inInfo, vtkInformationVector *outInfo) |
| | Upstream/Downstream requests form the generalized interface through which executives invoke a algorithm's functionality.
|
| |
| vtkTypeBool | ProcessRequest (vtkInformation *request, vtkCollection *inInfo, vtkInformationVector *outInfo) |
| | Version of ProcessRequest() that is wrapped.
|
| |
| virtual int | ComputePipelineMTime (vtkInformation *request, vtkInformationVector **inInfoVec, vtkInformationVector *outInfoVec, int requestFromOutputPort, vtkMTimeType *mtime) |
| | A special version of ProcessRequest meant specifically for the pipeline modified time request.
|
| |
| virtual int | ModifyRequest (vtkInformation *request, int when) |
| | This method gives the algorithm a chance to modify the contents of a request before or after (specified in the when argument) it is forwarded.
|
| |
| vtkInformation * | GetInputPortInformation (int port) |
| | Get the information object associated with an input port.
|
| |
| vtkInformation * | GetOutputPortInformation (int port) |
| | Get the information object associated with an output port.
|
| |
| int | GetNumberOfInputPorts () |
| | Get the number of input ports used by the algorithm.
|
| |
| int | GetNumberOfOutputPorts () |
| | Get the number of output ports provided by the algorithm.
|
| |
| void | SetAbortExecuteAndUpdateTime () |
| | Set AbortExecute Flag and update LastAbortTime.
|
| |
| void | UpdateProgress (double amount) |
| | Update the progress of the process object.
|
| |
| bool | CheckAbort () |
| | Checks to see if this filter should abort.
|
| |
| vtkInformation * | GetInputArrayInformation (int idx) |
| | Get the info object for the specified input array to this algorithm.
|
| |
| void | RemoveAllInputs () |
| | Remove all the input data.
|
| |
| vtkDataObject * | GetOutputDataObject (int port) |
| | Get the data object that will contain the algorithm output for the given port.
|
| |
| vtkDataObject * | GetInputDataObject (int port, int connection) |
| | Get the data object that will contain the algorithm input for the given port and given connection.
|
| |
| virtual void | RemoveInputConnection (int port, vtkAlgorithmOutput *input) |
| | Remove a connection from the given input port index.
|
| |
| virtual void | RemoveInputConnection (int port, int idx) |
| | Remove a connection given by index idx.
|
| |
| virtual void | RemoveAllInputConnections (int port) |
| | Removes all input connections.
|
| |
| virtual void | SetInputDataObject (int port, vtkDataObject *data) |
| | Sets the data-object as an input on the given port index.
|
| |
| virtual void | SetInputDataObject (vtkDataObject *data) |
| |
| virtual void | AddInputDataObject (int port, vtkDataObject *data) |
| | Add the data-object as an input to this given port.
|
| |
| virtual void | AddInputDataObject (vtkDataObject *data) |
| |
| vtkAlgorithmOutput * | GetOutputPort (int index) |
| | Get a proxy object corresponding to the given output port of this algorithm.
|
| |
| vtkAlgorithmOutput * | GetOutputPort () |
| |
| int | GetNumberOfInputConnections (int port) |
| | Get the number of inputs currently connected to a port.
|
| |
| int | GetTotalNumberOfInputConnections () |
| | Get the total number of inputs for this algorithm.
|
| |
| vtkAlgorithmOutput * | GetInputConnection (int port, int index) |
| | Get the algorithm output port connected to an input port.
|
| |
| vtkAlgorithm * | GetInputAlgorithm (int port, int index, int &algPort) |
| | Returns the algorithm and the output port index of that algorithm connected to a port-index pair.
|
| |
| vtkAlgorithm * | GetInputAlgorithm (int port, int index) |
| | Returns the algorithm connected to a port-index pair.
|
| |
| vtkAlgorithm * | GetInputAlgorithm () |
| | Equivalent to GetInputAlgorithm(0, 0).
|
| |
| vtkExecutive * | GetInputExecutive (int port, int index) |
| | Returns the executive associated with a particular input connection.
|
| |
| vtkExecutive * | GetInputExecutive () |
| | Equivalent to GetInputExecutive(0, 0)
|
| |
| vtkInformation * | GetInputInformation (int port, int index) |
| | Return the information object that is associated with a particular input connection.
|
| |
| vtkInformation * | GetInputInformation () |
| | Equivalent to GetInputInformation(0, 0)
|
| |
| vtkInformation * | GetOutputInformation (int port) |
| | Return the information object that is associated with a particular output port.
|
| |
| virtual vtkTypeBool | Update (int port, vtkInformationVector *requests) |
| | This method enables the passing of data requests to the algorithm to be used during execution (in addition to bringing a particular port up-to-date).
|
| |
| virtual vtkTypeBool | Update (vtkInformation *requests) |
| | Convenience method to update an algorithm after passing requests to its first output port.
|
| |
| virtual int | UpdatePiece (int piece, int numPieces, int ghostLevels, const int extents[6]=nullptr) |
| | Convenience method to update an algorithm after passing requests to its first output port.
|
| |
| virtual VTK_UNBLOCKTHREADS int | UpdateExtent (const int extents[6]) |
| | Convenience method to update an algorithm after passing requests to its first output port.
|
| |
| virtual VTK_UNBLOCKTHREADS int | UpdateTimeStep (double time, int piece=-1, int numPieces=1, int ghostLevels=0, const int extents[6]=nullptr) |
| | Convenience method to update an algorithm after passing requests to its first output port.
|
| |
| virtual VTK_UNBLOCKTHREADS void | UpdateInformation () |
| | Bring the algorithm's information up-to-date.
|
| |
| virtual void | UpdateDataObject () |
| | Create output object(s).
|
| |
| virtual void | PropagateUpdateExtent () |
| | Propagate meta-data upstream.
|
| |
| virtual VTK_UNBLOCKTHREADS void | UpdateWholeExtent () |
| | Bring this algorithm's outputs up-to-date.
|
| |
| void | ConvertTotalInputToPortConnection (int ind, int &port, int &conn) |
| | Convenience routine to convert from a linear ordering of input connections to a port/connection pair.
|
| |
| void | RemoveNoPriorTemporalAccessInformationKey () |
| | Removes any information key vtkStreamingDemandDrivenPipeline::NO_PRIOR_TEMPORAL_ACCESS() to all output ports of this vtkAlgorithm.
|
| |
| virtual vtkInformation * | GetInformation () |
| | Set/Get the information object associated with this algorithm.
|
| |
| virtual void | SetInformation (vtkInformation *) |
| | Set/Get the information object associated with this algorithm.
|
| |
| bool | UsesGarbageCollector () const override |
| | Participate in garbage collection.
|
| |
| virtual void | SetAbortExecute (vtkTypeBool) |
| | Set/Get the AbortExecute flag for the process object.
|
| |
| virtual vtkTypeBool | GetAbortExecute () |
| | Set/Get the AbortExecute flag for the process object.
|
| |
| virtual void | AbortExecuteOn () |
| | Set/Get the AbortExecute flag for the process object.
|
| |
| virtual void | AbortExecuteOff () |
| | Set/Get the AbortExecute flag for the process object.
|
| |
| virtual double | GetProgress () |
| | Get the execution progress of a process object.
|
| |
| void | SetContainerAlgorithm (vtkAlgorithm *containerAlg) |
| | Set/get a Container algorithm for this algorithm.
|
| |
| vtkAlgorithm * | GetContainerAlgorithm () |
| | Set/get a Container algorithm for this algorithm.
|
| |
| virtual void | SetAbortOutput (bool) |
| | Set/Get an internal variable used to communicate between the algorithm and executive.
|
| |
| virtual bool | GetAbortOutput () |
| | Set/Get an internal variable used to communicate between the algorithm and executive.
|
| |
| void | SetProgressShiftScale (double shift, double scale) |
| | Specify the shift and scale values to use to apply to the progress amount when UpdateProgress is called.
|
| |
| virtual double | GetProgressShift () |
| | Specify the shift and scale values to use to apply to the progress amount when UpdateProgress is called.
|
| |
| virtual double | GetProgressScale () |
| | Specify the shift and scale values to use to apply to the progress amount when UpdateProgress is called.
|
| |
| void | SetProgressText (const char *ptext) |
| | Set the current text message associated with the progress state.
|
| |
| virtual char * | GetProgressText () |
| | Set the current text message associated with the progress state.
|
| |
| virtual unsigned long | GetErrorCode () |
| | The error code contains a possible error that occurred while reading or writing the file.
|
| |
| void | SetInputArrayToProcess (const char *name, int fieldAssociation) |
| | Set the input data arrays that this algorithm will process.
|
| |
| virtual void | SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, const char *name) |
| | Set the input data arrays that this algorithm will process.
|
| |
| virtual void | SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, int fieldAttributeType) |
| | Set the input data arrays that this algorithm will process.
|
| |
| virtual void | SetInputArrayToProcess (int idx, vtkInformation *info) |
| | Set the input data arrays that this algorithm will process.
|
| |
| virtual void | SetInputArrayToProcess (int idx, int port, int connection, const char *fieldAssociation, const char *attributeTypeorName) |
| | Set the input data arrays that this algorithm will process.
|
| |
| virtual void | SetInputConnection (int port, vtkAlgorithmOutput *input) |
| | Set the connection for the given input port index.
|
| |
| virtual void | SetInputConnection (vtkAlgorithmOutput *input) |
| | Set the connection for the given input port index.
|
| |
| virtual void | AddInputConnection (int port, vtkAlgorithmOutput *input) |
| | Add a connection to the given input port index.
|
| |
| virtual void | AddInputConnection (vtkAlgorithmOutput *input) |
| | Add a connection to the given input port index.
|
| |
| virtual VTK_UNBLOCKTHREADS void | Update (int port) |
| | Bring this algorithm's outputs up-to-date.
|
| |
| virtual VTK_UNBLOCKTHREADS void | Update () |
| | Bring this algorithm's outputs up-to-date.
|
| |
| virtual void | SetReleaseDataFlag (vtkTypeBool) |
| | Turn release data flag on or off for all output ports.
|
| |
| virtual vtkTypeBool | GetReleaseDataFlag () |
| | Turn release data flag on or off for all output ports.
|
| |
| void | ReleaseDataFlagOn () |
| | Turn release data flag on or off for all output ports.
|
| |
| void | ReleaseDataFlagOff () |
| | Turn release data flag on or off for all output ports.
|
| |
| int | UpdateExtentIsEmpty (vtkInformation *pinfo, vtkDataObject *output) |
| | This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0.
|
| |
| int | UpdateExtentIsEmpty (vtkInformation *pinfo, int extentType) |
| | This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0.
|
| |
| int * | GetUpdateExtent () |
| | These functions return the update extent for output ports that use 3D extents.
|
| |
| int * | GetUpdateExtent (int port) |
| | These functions return the update extent for output ports that use 3D extents.
|
| |
| void | GetUpdateExtent (int &x0, int &x1, int &y0, int &y1, int &z0, int &z1) |
| | These functions return the update extent for output ports that use 3D extents.
|
| |
| void | GetUpdateExtent (int port, int &x0, int &x1, int &y0, int &y1, int &z0, int &z1) |
| | These functions return the update extent for output ports that use 3D extents.
|
| |
| void | GetUpdateExtent (int extent[6]) |
| | These functions return the update extent for output ports that use 3D extents.
|
| |
| void | GetUpdateExtent (int port, int extent[6]) |
| | These functions return the update extent for output ports that use 3D extents.
|
| |
| int | GetUpdatePiece () |
| | These functions return the update extent for output ports that use piece extents.
|
| |
| int | GetUpdatePiece (int port) |
| | These functions return the update extent for output ports that use piece extents.
|
| |
| int | GetUpdateNumberOfPieces () |
| | These functions return the update extent for output ports that use piece extents.
|
| |
| int | GetUpdateNumberOfPieces (int port) |
| | These functions return the update extent for output ports that use piece extents.
|
| |
| int | GetUpdateGhostLevel () |
| | These functions return the update extent for output ports that use piece extents.
|
| |
| int | GetUpdateGhostLevel (int port) |
| | These functions return the update extent for output ports that use piece extents.
|
| |
| void | SetProgressObserver (vtkProgressObserver *) |
| | If an ProgressObserver is set, the algorithm will report progress through it rather than directly.
|
| |
| virtual vtkProgressObserver * | GetProgressObserver () |
| | If an ProgressObserver is set, the algorithm will report progress through it rather than directly.
|
| |
| void | SetNoPriorTemporalAccessInformationKey (int key) |
| | Set to all output ports of this algorithm the information key vtkStreamingDemandDrivenPipeline::NO_PRIOR_TEMPORAL_ACCESS().
|
| |
| void | SetNoPriorTemporalAccessInformationKey () |
| | Set to all output ports of this algorithm the information key vtkStreamingDemandDrivenPipeline::NO_PRIOR_TEMPORAL_ACCESS().
|
| |
| | vtkBaseTypeMacro (vtkObject, vtkObjectBase) |
| |
| virtual void | DebugOn () |
| | Turn debugging output on.
|
| |
| virtual void | DebugOff () |
| | Turn debugging output off.
|
| |
| bool | GetDebug () |
| | Get the value of the debug flag.
|
| |
| void | SetDebug (bool debugFlag) |
| | Set the value of the debug flag.
|
| |
| virtual void | Modified () |
| | Update the modification time for this object.
|
| |
| virtual vtkMTimeType | GetMTime () |
| | Return this object's modified time.
|
| |
| void | PrintSelf (ostream &os, vtkIndent indent) override |
| | Methods invoked by print to print information about the object including superclasses.
|
| |
| void | RemoveObserver (unsigned long tag) |
| |
| void | RemoveObservers (unsigned long event) |
| |
| void | RemoveObservers (const char *event) |
| |
| void | RemoveAllObservers () |
| |
| vtkTypeBool | HasObserver (unsigned long event) |
| |
| vtkTypeBool | HasObserver (const char *event) |
| |
| vtkTypeBool | InvokeEvent (unsigned long event) |
| |
| vtkTypeBool | InvokeEvent (const char *event) |
| |
| std::string | GetObjectDescription () const override |
| | The object description printed in messages and PrintSelf output.
|
| |
| unsigned long | AddObserver (unsigned long event, vtkCommand *, float priority=0.0f) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object.
|
| |
| unsigned long | AddObserver (const char *event, vtkCommand *, float priority=0.0f) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object.
|
| |
| vtkCommand * | GetCommand (unsigned long tag) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object.
|
| |
| void | RemoveObserver (vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object.
|
| |
| void | RemoveObservers (unsigned long event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object.
|
| |
| void | RemoveObservers (const char *event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object.
|
| |
| vtkTypeBool | HasObserver (unsigned long event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object.
|
| |
| vtkTypeBool | HasObserver (const char *event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object.
|
| |
| template<class U , class T > |
| unsigned long | AddObserver (unsigned long event, U observer, void(T::*callback)(), float priority=0.0f) |
| | Overloads to AddObserver that allow developers to add class member functions as callbacks for events.
|
| |
| template<class U , class T > |
| unsigned long | AddObserver (unsigned long event, U observer, void(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f) |
| | Overloads to AddObserver that allow developers to add class member functions as callbacks for events.
|
| |
| template<class U , class T > |
| unsigned long | AddObserver (unsigned long event, U observer, bool(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f) |
| | Allow user to set the AbortFlagOn() with the return value of the callback method.
|
| |
| vtkTypeBool | InvokeEvent (unsigned long event, void *callData) |
| | This method invokes an event and return whether the event was aborted or not.
|
| |
| vtkTypeBool | InvokeEvent (const char *event, void *callData) |
| | This method invokes an event and return whether the event was aborted or not.
|
| |
| virtual void | SetObjectName (const std::string &objectName) |
| | Set/get the name of this object for reporting purposes.
|
| |
| virtual std::string | GetObjectName () const |
| | Set/get the name of this object for reporting purposes.
|
| |
| const char * | GetClassName () const |
| | Return the class name as a string.
|
| |
| virtual std::string | GetObjectDescription () const |
| | The object description printed in messages and PrintSelf output.
|
| |
| virtual vtkTypeBool | IsA (const char *name) |
| | Return 1 if this class is the same type of (or a subclass of) the named class.
|
| |
| virtual vtkIdType | GetNumberOfGenerationsFromBase (const char *name) |
| | Given the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class).
|
| |
| virtual void | Delete () |
| | Delete a VTK object.
|
| |
| virtual void | FastDelete () |
| | Delete a reference to this object.
|
| |
| void | InitializeObjectBase () |
| |
| void | Print (ostream &os) |
| | Print an object to an ostream.
|
| |
| void | Register (vtkObjectBase *o) |
| | Increase the reference count (mark as used by another object).
|
| |
| virtual void | UnRegister (vtkObjectBase *o) |
| | Decrease the reference count (release by another object).
|
| |
| int | GetReferenceCount () |
| | Return the current reference count of this object.
|
| |
| void | SetReferenceCount (int) |
| | Sets the reference count.
|
| |
| bool | GetIsInMemkind () const |
| | A local state flag that remembers whether this object lives in the normal or extended memory space.
|
| |
| virtual void | PrintHeader (ostream &os, vtkIndent indent) |
| | Methods invoked by print to print information about the object including superclasses.
|
| |
| virtual void | PrintTrailer (ostream &os, vtkIndent indent) |
| | Methods invoked by print to print information about the object including superclasses.
|
| |
|
| virtual vtkObjectBase * | NewInstanceInternal () const |
| |
| | vtkXMLStructuredDataReader () |
| |
| | ~vtkXMLStructuredDataReader () override |
| |
| virtual void | SetOutputExtent (int *extent)=0 |
| |
| int | ReadPrimaryElement (vtkXMLDataElement *ePrimary) override |
| | Read the primary element from the file.
|
| |
| void | ReadXMLData () override |
| | Pipeline execution methods to be defined by subclass.
|
| |
| void | SetupOutputInformation (vtkInformation *outInfo) override |
| |
| void | SetupEmptyOutput () override |
| | Setup the output with no data available.
|
| |
| void | SetupPieces (int numPieces) override |
| |
| void | DestroyPieces () override |
| |
| int | ReadArrayForPoints (vtkXMLDataElement *da, vtkAbstractArray *outArray) override |
| |
| int | ReadArrayForCells (vtkXMLDataElement *da, vtkAbstractArray *outArray) override |
| |
| int | ReadPiece (vtkXMLDataElement *ePiece) override |
| |
| virtual int | ReadSubExtent (int *inExtent, int *inDimensions, vtkIdType *inIncrements, int *outExtent, int *outDimensions, vtkIdType *outIncrements, int *subExtent, int *subDimensions, vtkXMLDataElement *da, vtkAbstractArray *array, FieldType type) |
| |
| virtual vtkObjectBase * | NewInstanceInternal () const |
| |
| | vtkXMLDataReader () |
| |
| | ~vtkXMLDataReader () override |
| |
| void | CreateXMLParser () override |
| | Internal utility methods.
|
| |
| void | DestroyXMLParser () override |
| | Internal utility methods.
|
| |
| void | SetupOutputInformation (vtkInformation *outInfo) override |
| |
| int | ReadPrimaryElement (vtkXMLDataElement *ePrimary) override |
| | Read the primary element from the file.
|
| |
| void | SetupOutputData () override |
| | Setup the output's data with allocation.
|
| |
| virtual void | SetupPieces (int numPieces) |
| |
| virtual void | DestroyPieces () |
| |
| int | ReadPiece (vtkXMLDataElement *ePiece, int piece) |
| |
| virtual int | ReadPiece (vtkXMLDataElement *ePiece) |
| |
| int | ReadPieceData (int piece) |
| |
| virtual int | ReadPieceData () |
| |
| void | ReadXMLData () override |
| | Pipeline execution methods to be defined by subclass.
|
| |
| virtual int | ReadArrayForPoints (vtkXMLDataElement *da, vtkAbstractArray *outArray) |
| |
| virtual int | ReadArrayForCells (vtkXMLDataElement *da, vtkAbstractArray *outArray) |
| |
| virtual void | DataProgressCallback () |
| |
| virtual vtkObjectBase * | NewInstanceInternal () const |
| |
| | vtkXMLReader () |
| |
| | ~vtkXMLReader () override |
| |
| virtual const char * | GetDataSetName ()=0 |
| | Get the name of the data set being read.
|
| |
| virtual int | CanReadFileVersion (int major, int minor) |
| | Test if the reader can read a file with the given version number.
|
| |
| virtual void | SetupEmptyOutput ()=0 |
| | Setup the output with no data available.
|
| |
| virtual void | SetupOutputInformation (vtkInformation *vtkNotUsed(outInfo)) |
| | Setup the output's information.
|
| |
| virtual void | SetupOutputData () |
| | Setup the output's data with allocation.
|
| |
| virtual int | ReadPrimaryElement (vtkXMLDataElement *ePrimary) |
| | Read the primary element from the file.
|
| |
| virtual int | ReadVTKFile (vtkXMLDataElement *eVTKFile) |
| | Read the top-level element from the file.
|
| |
| int | GetLocalDataType (vtkXMLDataElement *da, int datatype) |
| | If the IdType argument is present in the provided XMLDataElement and the provided dataType has the same size with VTK_ID_TYPE on this build of VTK, returns VTK_ID_TYPE.
|
| |
| vtkAbstractArray * | CreateArray (vtkXMLDataElement *da) |
| | Create a vtkAbstractArray from its corresponding XML representation.
|
| |
| int | CreateInformationKey (vtkXMLDataElement *eInfoKey, vtkInformation *info) |
| | Create a vtkInformationKey from its corresponding XML representation.
|
| |
| bool | ReadInformation (vtkXMLDataElement *infoRoot, vtkInformation *info) |
| | Populates the info object with the InformationKey children in infoRoot.
|
| |
| virtual int | CanReadFileWithDataType (const char *dsname) |
| | This method is used by CanReadFile() to check if the reader can read an XML with the primary element with the given name.
|
| |
| virtual int | GetFileMajorVersion () |
| | Returns the major version for the file being read.
|
| |
| virtual int | GetFileMinorVersion () |
| | Returns the minor version for the file being read.
|
| |
| virtual int | ReadArrayValues (vtkXMLDataElement *da, vtkIdType arrayIndex, vtkAbstractArray *array, vtkIdType startIndex, vtkIdType numValues, FieldType type=OTHER) |
| | Read an Array values starting at the given index and up to numValues.
|
| |
| virtual int | ReadArrayTuples (vtkXMLDataElement *da, vtkIdType arrayTupleIndex, vtkAbstractArray *array, vtkIdType startTupleIndex, vtkIdType numTuples, FieldType type=OTHER) |
| | Read an Array values starting at the given tuple index and up to numTuples taking into account the number of components declared in array.
|
| |
| void | SetDataArraySelections (vtkXMLDataElement *eDSA, vtkDataArraySelection *sel) |
| | Setup the data array selections for the input's set of arrays.
|
| |
| int | SetFieldDataInfo (vtkXMLDataElement *eDSA, int association, vtkIdType numTuples, vtkInformationVector *(&infoVector)) |
| |
| virtual void | SqueezeOutputArrays (vtkDataObject *) |
| | Give concrete classes an option to squeeze any output arrays at the end of RequestData.
|
| |
| void | MarkIdTypeArrays (vtkXMLDataElement *da) |
| | XML files have not consistently saved out adequate meta-data in past to correctly create vtkIdTypeArray for global ids and pedigree ids.
|
| |
| virtual void | GetProgressRange (float *range) |
| |
| virtual void | SetProgressRange (const float range[2], int curStep, int numSteps) |
| |
| virtual void | SetProgressRange (const float range[2], int curStep, const float *fractions) |
| |
| virtual void | UpdateProgressDiscrete (float progress) |
| |
| virtual int | RequestData (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) |
| |
| virtual int | RequestDataObject (vtkInformation *vtkNotUsed(request), vtkInformationVector **vtkNotUsed(inputVector), vtkInformationVector *vtkNotUsed(outputVector)) |
| |
| virtual int | RequestInformation (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) |
| |
| void | SetNumberOfTimeSteps (int num) |
| |
| vtkDataObject * | GetCurrentOutput () |
| |
| vtkInformation * | GetCurrentOutputInformation () |
| |
| virtual void | ConvertGhostLevelsToGhostType (FieldType, vtkAbstractArray *, vtkIdType, vtkIdType) |
| |
| void | ReadFieldData () |
| |
| virtual int | ReadXMLInformation () |
| | Pipeline execution methods to be defined by subclass.
|
| |
| virtual int | OpenStream () |
| | Internal utility methods.
|
| |
| virtual void | CloseStream () |
| | Internal utility methods.
|
| |
| virtual int | OpenVTKFile () |
| | Internal utility methods.
|
| |
| virtual void | CloseVTKFile () |
| | Internal utility methods.
|
| |
| virtual int | OpenVTKString () |
| | Internal utility methods.
|
| |
| virtual void | CloseVTKString () |
| | Internal utility methods.
|
| |
| void | SetupCompressor (const char *type) |
| | Internal utility methods.
|
| |
| int | CanReadFileVersionString (const char *version) |
| | Internal utility methods.
|
| |
| int | IntersectExtents (int *extent1, int *extent2, int *result) |
| | Utility methods for subclasses.
|
| |
| int | Min (int a, int b) |
| | Utility methods for subclasses.
|
| |
| int | Max (int a, int b) |
| | Utility methods for subclasses.
|
| |
| void | ComputePointDimensions (int *extent, int *dimensions) |
| | Utility methods for subclasses.
|
| |
| void | ComputePointIncrements (int *extent, vtkIdType *increments) |
| | Utility methods for subclasses.
|
| |
| void | ComputeCellDimensions (int *extent, int *dimensions) |
| | Utility methods for subclasses.
|
| |
| void | ComputeCellIncrements (int *extent, vtkIdType *increments) |
| | Utility methods for subclasses.
|
| |
| vtkIdType | GetStartTuple (int *extent, vtkIdType *increments, int i, int j, int k) |
| | Utility methods for subclasses.
|
| |
| void | ReadAttributeIndices (vtkXMLDataElement *eDSA, vtkDataSetAttributes *dsa) |
| | Utility methods for subclasses.
|
| |
| char ** | CreateStringArray (int numStrings) |
| | Utility methods for subclasses.
|
| |
| void | DestroyStringArray (int numStrings, char **strings) |
| | Utility methods for subclasses.
|
| |
| int | PointDataArrayIsEnabled (vtkXMLDataElement *ePDA) |
| | Check whether the given array element is an enabled array.
|
| |
| int | CellDataArrayIsEnabled (vtkXMLDataElement *eCDA) |
| | Check whether the given array element is an enabled array.
|
| |
| virtual vtkObjectBase * | NewInstanceInternal () const |
| |
| | vtkAlgorithm () |
| |
| | ~vtkAlgorithm () override |
| |
| bool | CheckUpstreamAbort () |
| | Checks to see if an upstream filter has been aborted.
|
| |
| virtual int | FillInputPortInformation (int port, vtkInformation *info) |
| | Fill the input port information objects for this algorithm.
|
| |
| virtual int | FillOutputPortInformation (int port, vtkInformation *info) |
| | Fill the output port information objects for this algorithm.
|
| |
| virtual void | SetNumberOfInputPorts (int n) |
| | Set the number of input ports used by the algorithm.
|
| |
| virtual void | SetNumberOfOutputPorts (int n) |
| | Set the number of output ports provided by the algorithm.
|
| |
| int | InputPortIndexInRange (int index, const char *action) |
| |
| int | OutputPortIndexInRange (int index, const char *action) |
| |
| int | GetInputArrayAssociation (int idx, vtkInformationVector **inputVector) |
| | Get the association of the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass.
|
| |
| vtkInformation * | GetInputArrayFieldInformation (int idx, vtkInformationVector **inputVector) |
| | This method takes in an index (as specified in SetInputArrayToProcess) and a pipeline information vector.
|
| |
| virtual vtkExecutive * | CreateDefaultExecutive () |
| | Create a default executive.
|
| |
| void | ReportReferences (vtkGarbageCollector *) override |
| |
| virtual void | SetNthInputConnection (int port, int index, vtkAlgorithmOutput *input) |
| | Replace the Nth connection on the given input port.
|
| |
| virtual void | SetNumberOfInputConnections (int port, int n) |
| | Set the number of input connections on the given input port.
|
| |
| void | SetInputDataInternal (int port, vtkDataObject *input) |
| | These methods are used by subclasses to implement methods to set data objects directly as input.
|
| |
| void | AddInputDataInternal (int port, vtkDataObject *input) |
| |
| int | GetInputArrayAssociation (int idx, int connection, vtkInformationVector **inputVector) |
| | Filters that have multiple connections on one port can use this signature.
|
| |
| int | GetInputArrayAssociation (int idx, vtkDataObject *input) |
| | Filters that have multiple connections on one port can use this signature.
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, vtkInformationVector **inputVector) |
| | Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass.
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, vtkInformationVector **inputVector, int &association) |
| | Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass.
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector) |
| | Filters that have multiple connections on one port can use this signature.
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association) |
| | Filters that have multiple connections on one port can use this signature.
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, vtkDataObject *input) |
| | Filters that have multiple connections on one port can use this signature.
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, vtkDataObject *input, int &association) |
| | Filters that have multiple connections on one port can use this signature.
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector) |
| | Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass.
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector, int &association) |
| | Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass.
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector) |
| | Filters that have multiple connections on one port can use this signature.
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association) |
| | Filters that have multiple connections on one port can use this signature.
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkDataObject *input) |
| | Filters that have multiple connections on one port can use this signature.
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkDataObject *input, int &association) |
| | Filters that have multiple connections on one port can use this signature.
|
| |
| virtual void | SetErrorCode (unsigned long) |
| | The error code contains a possible error that occurred while reading or writing the file.
|
| |
| | vtkObject () |
| |
| | ~vtkObject () override |
| |
| void | RegisterInternal (vtkObjectBase *, vtkTypeBool check) override |
| |
| void | UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) override |
| |
| void | InternalGrabFocus (vtkCommand *mouseEvents, vtkCommand *keypressEvents=nullptr) |
| | These methods allow a command to exclusively grab all events.
|
| |
| void | InternalReleaseFocus () |
| | These methods allow a command to exclusively grab all events.
|
| |
| | vtkObjectBase () |
| |
| virtual | ~vtkObjectBase () |
| |
| virtual void | RegisterInternal (vtkObjectBase *, vtkTypeBool check) |
| |
| virtual void | UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) |
| |
| virtual void | ReportReferences (vtkGarbageCollector *) |
| |
| virtual void | ObjectFinalize () |
| |
| | vtkObjectBase (const vtkObjectBase &) |
| |
| void | operator= (const vtkObjectBase &) |
| |
Public Types inherited from vtkXMLDataReader
1.9.7