VTK  9.3.20240328
Public Member Functions | Protected Member Functions | Protected Attributes | List of all members
vtkDataSetSurfaceFilter Class Reference

Extracts outer surface (as vtkPolyData) of any dataset. More...

#include <vtkDataSetSurfaceFilter.h>

Inheritance diagram for vtkDataSetSurfaceFilter:
[legend]
Collaboration diagram for vtkDataSetSurfaceFilter:
[legend]

Public Member Functions

int UnstructuredGridExecute (vtkDataSet *input, vtkPolyData *output, vtkGeometryFilterHelper *info)
 Optimized UnstructuredGridExecute function for vtkUnstructuredGrid and subclass instances only. More...
 
virtual void SetPassThroughCellIds (vtkTypeBool)
 If on, the output polygonal dataset will have a celldata array that holds the cell index of the original 3D cell that produced each output cell. More...
 
virtual vtkTypeBool GetPassThroughCellIds ()
 If on, the output polygonal dataset will have a celldata array that holds the cell index of the original 3D cell that produced each output cell. More...
 
virtual void PassThroughCellIdsOn ()
 If on, the output polygonal dataset will have a celldata array that holds the cell index of the original 3D cell that produced each output cell. More...
 
virtual void PassThroughCellIdsOff ()
 If on, the output polygonal dataset will have a celldata array that holds the cell index of the original 3D cell that produced each output cell. More...
 
virtual void SetPassThroughPointIds (vtkTypeBool)
 If on, the output polygonal dataset will have a celldata array that holds the cell index of the original 3D cell that produced each output cell. More...
 
virtual vtkTypeBool GetPassThroughPointIds ()
 If on, the output polygonal dataset will have a celldata array that holds the cell index of the original 3D cell that produced each output cell. More...
 
virtual void PassThroughPointIdsOn ()
 If on, the output polygonal dataset will have a celldata array that holds the cell index of the original 3D cell that produced each output cell. More...
 
virtual void PassThroughPointIdsOff ()
 If on, the output polygonal dataset will have a celldata array that holds the cell index of the original 3D cell that produced each output cell. More...
 
virtual void SetFastMode (bool)
 Turn on/off fast mode execution. More...
 
virtual bool GetFastMode ()
 Turn on/off fast mode execution. More...
 
virtual void FastModeOn ()
 Turn on/off fast mode execution. More...
 
virtual void FastModeOff ()
 Turn on/off fast mode execution. More...
 
virtual void SetOriginalCellIdsName (const char *)
 If PassThroughCellIds or PassThroughPointIds is on, then these ivars control the name given to the field in which the ids are written into. More...
 
virtual const char * GetOriginalCellIdsName ()
 If PassThroughCellIds or PassThroughPointIds is on, then these ivars control the name given to the field in which the ids are written into. More...
 
virtual void SetOriginalPointIdsName (const char *)
 If PassThroughCellIds or PassThroughPointIds is on, then these ivars control the name given to the field in which the ids are written into. More...
 
virtual const char * GetOriginalPointIdsName ()
 If PassThroughCellIds or PassThroughPointIds is on, then these ivars control the name given to the field in which the ids are written into. More...
 
virtual void SetNonlinearSubdivisionLevel (int)
 If the input is an unstructured grid with nonlinear faces, this parameter determines how many times the face is subdivided into linear faces. More...
 
virtual int GetNonlinearSubdivisionLevel ()
 If the input is an unstructured grid with nonlinear faces, this parameter determines how many times the face is subdivided into linear faces. More...
 
virtual void SetMatchBoundariesIgnoringCellOrder (int)
 When two volumetric cells of different order are connected by their corners (for instance, a quadratic hexahedron next to a linear hexahedron ), the internal face is rendered and is not considered as a ghost cell. More...
 
virtual int GetMatchBoundariesIgnoringCellOrder ()
 When two volumetric cells of different order are connected by their corners (for instance, a quadratic hexahedron next to a linear hexahedron ), the internal face is rendered and is not considered as a ghost cell. More...
 
virtual void SetDelegation (vtkTypeBool)
 Disable delegation to an internal vtkGeometryFilter. More...
 
virtual vtkTypeBool GetDelegation ()
 Disable delegation to an internal vtkGeometryFilter. More...
 
virtual void DelegationOn ()
 Disable delegation to an internal vtkGeometryFilter. More...
 
virtual void DelegationOff ()
 Disable delegation to an internal vtkGeometryFilter. More...
 
virtual int StructuredExecute (vtkDataSet *input, vtkPolyData *output, vtkIdType *ext, vtkIdType *wholeExt)
 Direct access methods so that this class can be used as an algorithm without using it as a filter (i.e., no pipeline updates). More...
 
virtual int UnstructuredGridExecute (vtkDataSet *input, vtkPolyData *output)
 Execute the filter on input and store the result in output. More...
 
virtual int DataSetExecute (vtkDataSet *input, vtkPolyData *output)
 Execute the filter on input and store the result in output. More...
 
virtual int UniformGridExecute (vtkDataSet *input, vtkPolyData *output, vtkIdType *ext, vtkIdType *wholeExt, bool extractface[6])
 Direct access methods so that this class can be used as an algorithm without using it as a filter (i.e., no pipeline updates). More...
 
- Public Member Functions inherited from vtkPolyDataAlgorithm
vtkPolyDataAlgorithmNewInstance () const
 
vtkTypeBool ProcessRequest (vtkInformation *, vtkInformationVector **, vtkInformationVector *) override
 see vtkAlgorithm for details More...
 
vtkDataObjectGetInput ()
 
vtkDataObjectGetInput (int port)
 
vtkPolyDataGetPolyDataInput (int port)
 
vtkPolyDataGetOutput ()
 Get the output data object for a port on this algorithm. More...
 
vtkPolyDataGetOutput (int)
 Get the output data object for a port on this algorithm. More...
 
virtual void SetOutput (vtkDataObject *d)
 Get the output data object for a port on this algorithm. More...
 
void SetInputData (vtkDataObject *)
 Assign a data object as input. More...
 
void SetInputData (int, vtkDataObject *)
 Assign a data object as input. More...
 
void AddInputData (vtkDataObject *)
 Assign a data object as input. More...
 
void AddInputData (int, vtkDataObject *)
 Assign a data object as input. More...
 
- Public Member Functions inherited from vtkAlgorithm
vtkAlgorithmNewInstance () const
 
vtkTypeBool HasExecutive ()
 Check whether this algorithm has an assigned executive. More...
 
vtkExecutiveGetExecutive ()
 Get this algorithm's executive. More...
 
virtual void SetExecutive (vtkExecutive *executive)
 Set this algorithm's executive. More...
 
vtkTypeBool ProcessRequest (vtkInformation *request, vtkCollection *inInfo, vtkInformationVector *outInfo)
 Version of ProcessRequest() that is wrapped. More...
 
virtual int ComputePipelineMTime (vtkInformation *request, vtkInformationVector **inInfoVec, vtkInformationVector *outInfoVec, int requestFromOutputPort, vtkMTimeType *mtime)
 A special version of ProcessRequest meant specifically for the pipeline modified time request. More...
 
virtual int ModifyRequest (vtkInformation *request, int when)
 This method gives the algorithm a chance to modify the contents of a request before or after (specified in the when argument) it is forwarded. More...
 
vtkInformationGetInputPortInformation (int port)
 Get the information object associated with an input port. More...
 
vtkInformationGetOutputPortInformation (int port)
 Get the information object associated with an output port. More...
 
int GetNumberOfInputPorts ()
 Get the number of input ports used by the algorithm. More...
 
int GetNumberOfOutputPorts ()
 Get the number of output ports provided by the algorithm. More...
 
void SetAbortExecuteAndUpdateTime ()
 Set AbortExecute Flag and update LastAbortTime. More...
 
void UpdateProgress (double amount)
 Update the progress of the process object. More...
 
bool CheckAbort ()
 Checks to see if this filter should abort. More...
 
virtual void SetInputArrayToProcess (int idx, int port, int connection, const char *fieldAssociation, const char *attributeTypeorName)
 String based versions of SetInputArrayToProcess(). More...
 
vtkInformationGetInputArrayInformation (int idx)
 Get the info object for the specified input array to this algorithm. More...
 
void RemoveAllInputs ()
 Remove all the input data. More...
 
vtkDataObjectGetOutputDataObject (int port)
 Get the data object that will contain the algorithm output for the given port. More...
 
vtkDataObjectGetInputDataObject (int port, int connection)
 Get the data object that will contain the algorithm input for the given port and given connection. More...
 
virtual void RemoveInputConnection (int port, vtkAlgorithmOutput *input)
 Remove a connection from the given input port index. More...
 
virtual void RemoveInputConnection (int port, int idx)
 Remove a connection given by index idx. More...
 
virtual void RemoveAllInputConnections (int port)
 Removes all input connections. More...
 
virtual void SetInputDataObject (int port, vtkDataObject *data)
 Sets the data-object as an input on the given port index. More...
 
virtual void SetInputDataObject (vtkDataObject *data)
 
virtual void AddInputDataObject (int port, vtkDataObject *data)
 Add the data-object as an input to this given port. More...
 
virtual void AddInputDataObject (vtkDataObject *data)
 
vtkAlgorithmOutputGetOutputPort (int index)
 Get a proxy object corresponding to the given output port of this algorithm. More...
 
vtkAlgorithmOutputGetOutputPort ()
 
int GetNumberOfInputConnections (int port)
 Get the number of inputs currently connected to a port. More...
 
int GetTotalNumberOfInputConnections ()
 Get the total number of inputs for this algorithm. More...
 
vtkAlgorithmOutputGetInputConnection (int port, int index)
 Get the algorithm output port connected to an input port. More...
 
vtkAlgorithmGetInputAlgorithm (int port, int index, int &algPort)
 Returns the algorithm and the output port index of that algorithm connected to a port-index pair. More...
 
vtkAlgorithmGetInputAlgorithm (int port, int index)
 Returns the algorithm connected to a port-index pair. More...
 
vtkAlgorithmGetInputAlgorithm ()
 Equivalent to GetInputAlgorithm(0, 0). More...
 
vtkExecutiveGetInputExecutive (int port, int index)
 Returns the executive associated with a particular input connection. More...
 
vtkExecutiveGetInputExecutive ()
 Equivalent to GetInputExecutive(0, 0) More...
 
vtkInformationGetInputInformation (int port, int index)
 Return the information object that is associated with a particular input connection. More...
 
vtkInformationGetInputInformation ()
 Equivalent to GetInputInformation(0, 0) More...
 
vtkInformationGetOutputInformation (int port)
 Return the information object that is associated with a particular output port. More...
 
virtual vtkTypeBool Update (int port, vtkInformationVector *requests)
 This method enables the passing of data requests to the algorithm to be used during execution (in addition to bringing a particular port up-to-date). More...
 
virtual vtkTypeBool Update (vtkInformation *requests)
 Convenience method to update an algorithm after passing requests to its first output port. More...
 
virtual int UpdatePiece (int piece, int numPieces, int ghostLevels, const int extents[6]=nullptr)
 Convenience method to update an algorithm after passing requests to its first output port. More...
 
virtual int UpdateExtent (const int extents[6])
 Convenience method to update an algorithm after passing requests to its first output port. More...
 
virtual int UpdateTimeStep (double time, int piece=-1, int numPieces=1, int ghostLevels=0, const int extents[6]=nullptr)
 Convenience method to update an algorithm after passing requests to its first output port. More...
 
virtual void UpdateInformation ()
 Bring the algorithm's information up-to-date. More...
 
virtual void UpdateDataObject ()
 Create output object(s). More...
 
virtual void PropagateUpdateExtent ()
 Propagate meta-data upstream. More...
 
virtual void UpdateWholeExtent ()
 Bring this algorithm's outputs up-to-date. More...
 
void ConvertTotalInputToPortConnection (int ind, int &port, int &conn)
 Convenience routine to convert from a linear ordering of input connections to a port/connection pair. More...
 
void RemoveNoPriorTemporalAccessInformationKey ()
 Removes any information key vtkStreamingDemandDrivenPipeline::NO_PRIOR_TEMPORAL_ACCESS() to all output ports of this vtkAlgorithm. More...
 
virtual vtkInformationGetInformation ()
 Set/Get the information object associated with this algorithm. More...
 
virtual void SetInformation (vtkInformation *)
 Set/Get the information object associated with this algorithm. More...
 
bool UsesGarbageCollector () const override
 Participate in garbage collection. More...
 
virtual void SetAbortExecute (vtkTypeBool)
 Set/Get the AbortExecute flag for the process object. More...
 
virtual vtkTypeBool GetAbortExecute ()
 Set/Get the AbortExecute flag for the process object. More...
 
virtual void AbortExecuteOn ()
 Set/Get the AbortExecute flag for the process object. More...
 
virtual void AbortExecuteOff ()
 Set/Get the AbortExecute flag for the process object. More...
 
virtual double GetProgress ()
 Get the execution progress of a process object. More...
 
void SetContainerAlgorithm (vtkAlgorithm *containerAlg)
 Set/get a Container algorithm for this algorithm. More...
 
vtkAlgorithmGetContainerAlgorithm ()
 Set/get a Container algorithm for this algorithm. More...
 
virtual void SetAbortOutput (bool)
 Set/Get an internal variable used to communicate between the algorithm and executive. More...
 
virtual bool GetAbortOutput ()
 Set/Get an internal variable used to communicate between the algorithm and executive. More...
 
void SetProgressShiftScale (double shift, double scale)
 Specify the shift and scale values to use to apply to the progress amount when UpdateProgress is called. More...
 
virtual double GetProgressShift ()
 Specify the shift and scale values to use to apply to the progress amount when UpdateProgress is called. More...
 
virtual double GetProgressScale ()
 Specify the shift and scale values to use to apply to the progress amount when UpdateProgress is called. More...
 
void SetProgressText (const char *ptext)
 Set the current text message associated with the progress state. More...
 
virtual char * GetProgressText ()
 Set the current text message associated with the progress state. More...
 
virtual unsigned long GetErrorCode ()
 The error code contains a possible error that occurred while reading or writing the file. More...
 
virtual void SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, const char *name)
 Set the input data arrays that this algorithm will process. More...
 
virtual void SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, int fieldAttributeType)
 Set the input data arrays that this algorithm will process. More...
 
virtual void SetInputArrayToProcess (int idx, vtkInformation *info)
 Set the input data arrays that this algorithm will process. More...
 
virtual void SetInputConnection (int port, vtkAlgorithmOutput *input)
 Set the connection for the given input port index. More...
 
virtual void SetInputConnection (vtkAlgorithmOutput *input)
 Set the connection for the given input port index. More...
 
virtual void AddInputConnection (int port, vtkAlgorithmOutput *input)
 Add a connection to the given input port index. More...
 
virtual void AddInputConnection (vtkAlgorithmOutput *input)
 Add a connection to the given input port index. More...
 
virtual void Update (int port)
 Bring this algorithm's outputs up-to-date. More...
 
virtual void Update ()
 Bring this algorithm's outputs up-to-date. More...
 
virtual void SetReleaseDataFlag (vtkTypeBool)
 Turn release data flag on or off for all output ports. More...
 
virtual vtkTypeBool GetReleaseDataFlag ()
 Turn release data flag on or off for all output ports. More...
 
void ReleaseDataFlagOn ()
 Turn release data flag on or off for all output ports. More...
 
void ReleaseDataFlagOff ()
 Turn release data flag on or off for all output ports. More...
 
int UpdateExtentIsEmpty (vtkInformation *pinfo, vtkDataObject *output)
 This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. More...
 
int UpdateExtentIsEmpty (vtkInformation *pinfo, int extentType)
 This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. More...
 
int * GetUpdateExtent ()
 These functions return the update extent for output ports that use 3D extents. More...
 
int * GetUpdateExtent (int port)
 These functions return the update extent for output ports that use 3D extents. More...
 
void GetUpdateExtent (int &x0, int &x1, int &y0, int &y1, int &z0, int &z1)
 These functions return the update extent for output ports that use 3D extents. More...
 
void GetUpdateExtent (int port, int &x0, int &x1, int &y0, int &y1, int &z0, int &z1)
 These functions return the update extent for output ports that use 3D extents. More...
 
void GetUpdateExtent (int extent[6])
 These functions return the update extent for output ports that use 3D extents. More...
 
void GetUpdateExtent (int port, int extent[6])
 These functions return the update extent for output ports that use 3D extents. More...
 
int GetUpdatePiece ()
 These functions return the update extent for output ports that use piece extents. More...
 
int GetUpdatePiece (int port)
 These functions return the update extent for output ports that use piece extents. More...
 
int GetUpdateNumberOfPieces ()
 These functions return the update extent for output ports that use piece extents. More...
 
int GetUpdateNumberOfPieces (int port)
 These functions return the update extent for output ports that use piece extents. More...
 
int GetUpdateGhostLevel ()
 These functions return the update extent for output ports that use piece extents. More...
 
int GetUpdateGhostLevel (int port)
 These functions return the update extent for output ports that use piece extents. More...
 
void SetProgressObserver (vtkProgressObserver *)
 If an ProgressObserver is set, the algorithm will report progress through it rather than directly. More...
 
virtual vtkProgressObserverGetProgressObserver ()
 If an ProgressObserver is set, the algorithm will report progress through it rather than directly. More...
 
void SetNoPriorTemporalAccessInformationKey (int key)
 Set to all output ports of this algorithm the information key vtkStreamingDemandDrivenPipeline::NO_PRIOR_TEMPORAL_ACCESS(). More...
 
void SetNoPriorTemporalAccessInformationKey ()
 Set to all output ports of this algorithm the information key vtkStreamingDemandDrivenPipeline::NO_PRIOR_TEMPORAL_ACCESS(). More...
 
- Public Member Functions inherited from vtkObject
 vtkBaseTypeMacro (vtkObject, vtkObjectBase)
 
virtual void DebugOn ()
 Turn debugging output on. More...
 
virtual void DebugOff ()
 Turn debugging output off. More...
 
bool GetDebug ()
 Get the value of the debug flag. More...
 
void SetDebug (bool debugFlag)
 Set the value of the debug flag. More...
 
virtual void Modified ()
 Update the modification time for this object. More...
 
virtual vtkMTimeType GetMTime ()
 Return this object's modified time. More...
 
void RemoveObserver (unsigned long tag)
 
void RemoveObservers (unsigned long event)
 
void RemoveObservers (const char *event)
 
void RemoveAllObservers ()
 
vtkTypeBool HasObserver (unsigned long event)
 
vtkTypeBool HasObserver (const char *event)
 
vtkTypeBool InvokeEvent (unsigned long event)
 
vtkTypeBool InvokeEvent (const char *event)
 
std::string GetObjectDescription () const override
 The object description printed in messages and PrintSelf output. More...
 
unsigned long AddObserver (unsigned long event, vtkCommand *, float priority=0.0f)
 Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
 
unsigned long AddObserver (const char *event, vtkCommand *, float priority=0.0f)
 Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
 
vtkCommandGetCommand (unsigned long tag)
 Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
 
void RemoveObserver (vtkCommand *)
 Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
 
void RemoveObservers (unsigned long event, vtkCommand *)
 Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
 
void RemoveObservers (const char *event, vtkCommand *)
 Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
 
vtkTypeBool HasObserver (unsigned long event, vtkCommand *)
 Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
 
vtkTypeBool HasObserver (const char *event, vtkCommand *)
 Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
 
template<class U , class T >
unsigned long AddObserver (unsigned long event, U observer, void(T::*callback)(), float priority=0.0f)
 Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...
 
template<class U , class T >
unsigned long AddObserver (unsigned long event, U observer, void(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f)
 Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...
 
template<class U , class T >
unsigned long AddObserver (unsigned long event, U observer, bool(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f)
 Allow user to set the AbortFlagOn() with the return value of the callback method. More...
 
vtkTypeBool InvokeEvent (unsigned long event, void *callData)
 This method invokes an event and return whether the event was aborted or not. More...
 
vtkTypeBool InvokeEvent (const char *event, void *callData)
 This method invokes an event and return whether the event was aborted or not. More...
 
virtual void SetObjectName (const std::string &objectName)
 Set/get the name of this object for reporting purposes. More...
 
virtual std::string GetObjectName () const
 Set/get the name of this object for reporting purposes. More...
 
- Public Member Functions inherited from vtkObjectBase
const char * GetClassName () const
 Return the class name as a string. More...
 
virtual vtkIdType GetNumberOfGenerationsFromBase (const char *name)
 Given the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). More...
 
virtual void Delete ()
 Delete a VTK object. More...
 
virtual void FastDelete ()
 Delete a reference to this object. More...
 
void InitializeObjectBase ()
 
void Print (ostream &os)
 Print an object to an ostream. More...
 
void Register (vtkObjectBase *o)
 Increase the reference count (mark as used by another object). More...
 
virtual void UnRegister (vtkObjectBase *o)
 Decrease the reference count (release by another object). More...
 
int GetReferenceCount ()
 Return the current reference count of this object. More...
 
void SetReferenceCount (int)
 Sets the reference count. More...
 
bool GetIsInMemkind () const
 A local state flag that remembers whether this object lives in the normal or extended memory space. More...
 
virtual void PrintHeader (ostream &os, vtkIndent indent)
 Methods invoked by print to print information about the object including superclasses. More...
 
virtual void PrintTrailer (ostream &os, vtkIndent indent)
 Methods invoked by print to print information about the object including superclasses. More...
 

Protected Member Functions

 vtkDataSetSurfaceFilter ()
 
 ~vtkDataSetSurfaceFilter () override
 
int RequestUpdateExtent (vtkInformation *, vtkInformationVector **, vtkInformationVector *) override
 This is called by the superclass. More...
 
int RequestData (vtkInformation *, vtkInformationVector **, vtkInformationVector *) override
 This is called by the superclass. More...
 
int FillInputPortInformation (int port, vtkInformation *info) override
 Fill the input port information objects for this algorithm. More...
 
void EstimateStructuredDataArraySizes (vtkIdType *ext, vtkIdType *wholeExt, vtkIdType &numPoints, vtkIdType &numCells)
 Estimates the total number of points & cells on the surface to render ext – the extent of the structured data in question (in) wholeExt – the global extent of the structured data (in) numPoints – the estimated number of points (out) numCells – the estimated number of cells (out) More...
 
void ExecuteFaceQuads (vtkDataSet *input, vtkPolyData *output, int maxFlag, vtkIdType *ext, int aAxis, int bAxis, int cAxis, vtkIdType *wholeExt, bool checkVisibility)
 
void ExecuteFaceQuads (vtkDataSet *input, vtkPolyData *output, int maxFlag, vtkIdType *ext, int aAxis, int bAxis, int cAxis, vtkIdType *wholeExt)
 
void InitializeQuadHash (vtkIdType numPoints)
 
void DeleteQuadHash ()
 
virtual void InsertQuadInHash (vtkIdType a, vtkIdType b, vtkIdType c, vtkIdType d, vtkIdType sourceId)
 
virtual void InsertTriInHash (vtkIdType a, vtkIdType b, vtkIdType c, vtkIdType sourceId, vtkIdType faceId=-1)
 
virtual void InsertPolygonInHash (const vtkIdType *ids, int numpts, vtkIdType sourceId)
 
void InitQuadHashTraversal ()
 
vtkFastGeomQuadGetNextVisibleQuadFromHash ()
 
vtkIdType GetOutputPointId (vtkIdType inPtId, vtkDataSet *input, vtkPoints *outPts, vtkPointData *outPD)
 
vtkIdType GetOutputPointIdAndInterpolate (vtkIdType inPtId, vtkDataSet *input, vtkCell *cell, double *weights, vtkPoints *outPts, vtkPointData *outPD)
 
vtkIdType GetInterpolatedPointId (vtkIdType edgePtA, vtkIdType edgePtB, vtkDataSet *input, vtkCell *cell, double *pcoords, double *weights, vtkPoints *outPts, vtkPointData *outPD)
 
vtkIdType GetInterpolatedPointId (vtkDataSet *input, vtkCell *cell, double pcoords[3], double *weights, vtkPoints *outPts, vtkPointData *outPD)
 
void InitFastGeomQuadAllocation (vtkIdType numberOfCells)
 
vtkFastGeomQuadNewFastGeomQuad (int numPts)
 
void DeleteAllFastGeomQuads ()
 
void RecordOrigCellId (vtkIdType newIndex, vtkIdType origId)
 
virtual void RecordOrigCellId (vtkIdType newIndex, vtkFastGeomQuad *quad)
 
void RecordOrigPointId (vtkIdType newIndex, vtkIdType origId)
 
- Protected Member Functions inherited from vtkPolyDataAlgorithm
 vtkPolyDataAlgorithm ()
 
 ~vtkPolyDataAlgorithm () override
 
virtual int RequestInformation (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector)
 
virtual int RequestUpdateTime (vtkInformation *, vtkInformationVector **, vtkInformationVector *)
 This is called by the superclass. More...
 
int FillOutputPortInformation (int port, vtkInformation *info) override
 Fill the output port information objects for this algorithm. More...
 
- Protected Member Functions inherited from vtkAlgorithm
 vtkAlgorithm ()
 
 ~vtkAlgorithm () override
 
bool CheckUpstreamAbort ()
 Checks to see if an upstream filter has been aborted. More...
 
virtual void SetNumberOfInputPorts (int n)
 Set the number of input ports used by the algorithm. More...
 
virtual void SetNumberOfOutputPorts (int n)
 Set the number of output ports provided by the algorithm. More...
 
int InputPortIndexInRange (int index, const char *action)
 
int OutputPortIndexInRange (int index, const char *action)
 
int GetInputArrayAssociation (int idx, vtkInformationVector **inputVector)
 Get the association of the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
 
vtkInformationGetInputArrayFieldInformation (int idx, vtkInformationVector **inputVector)
 This method takes in an index (as specified in SetInputArrayToProcess) and a pipeline information vector. More...
 
virtual vtkExecutiveCreateDefaultExecutive ()
 Create a default executive. More...
 
void ReportReferences (vtkGarbageCollector *) override
 
virtual void SetNthInputConnection (int port, int index, vtkAlgorithmOutput *input)
 Replace the Nth connection on the given input port. More...
 
virtual void SetNumberOfInputConnections (int port, int n)
 Set the number of input connections on the given input port. More...
 
void SetInputDataInternal (int port, vtkDataObject *input)
 These methods are used by subclasses to implement methods to set data objects directly as input. More...
 
void AddInputDataInternal (int port, vtkDataObject *input)
 
int GetInputArrayAssociation (int idx, int connection, vtkInformationVector **inputVector)
 Filters that have multiple connections on one port can use this signature. More...
 
int GetInputArrayAssociation (int idx, vtkDataObject *input)
 Filters that have multiple connections on one port can use this signature. More...
 
vtkDataArrayGetInputArrayToProcess (int idx, vtkInformationVector **inputVector)
 Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
 
vtkDataArrayGetInputArrayToProcess (int idx, vtkInformationVector **inputVector, int &association)
 Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
 
vtkDataArrayGetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector)
 Filters that have multiple connections on one port can use this signature. More...
 
vtkDataArrayGetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association)
 Filters that have multiple connections on one port can use this signature. More...
 
vtkDataArrayGetInputArrayToProcess (int idx, vtkDataObject *input)
 Filters that have multiple connections on one port can use this signature. More...
 
vtkDataArrayGetInputArrayToProcess (int idx, vtkDataObject *input, int &association)
 Filters that have multiple connections on one port can use this signature. More...
 
vtkAbstractArrayGetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector)
 Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
 
vtkAbstractArrayGetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector, int &association)
 Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
 
vtkAbstractArrayGetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector)
 Filters that have multiple connections on one port can use this signature. More...
 
vtkAbstractArrayGetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association)
 Filters that have multiple connections on one port can use this signature. More...
 
vtkAbstractArrayGetInputAbstractArrayToProcess (int idx, vtkDataObject *input)
 Filters that have multiple connections on one port can use this signature. More...
 
vtkAbstractArrayGetInputAbstractArrayToProcess (int idx, vtkDataObject *input, int &association)
 Filters that have multiple connections on one port can use this signature. More...
 
virtual void SetErrorCode (unsigned long)
 The error code contains a possible error that occurred while reading or writing the file. More...
 
- Protected Member Functions inherited from vtkObject
 vtkObject ()
 
 ~vtkObject () override
 
void RegisterInternal (vtkObjectBase *, vtkTypeBool check) override
 
void UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) override
 
void InternalGrabFocus (vtkCommand *mouseEvents, vtkCommand *keypressEvents=nullptr)
 These methods allow a command to exclusively grab all events. More...
 
void InternalReleaseFocus ()
 These methods allow a command to exclusively grab all events. More...
 
- Protected Member Functions inherited from vtkObjectBase
 vtkObjectBase ()
 
virtual ~vtkObjectBase ()
 
 vtkObjectBase (const vtkObjectBase &)
 
void operator= (const vtkObjectBase &)
 

Protected Attributes

vtkFastGeomQuad ** QuadHash
 
vtkIdType QuadHashLength
 
vtkFastGeomQuadQuadHashTraversal
 
vtkIdType QuadHashTraversalIndex
 
vtkIdTypePointMap
 
vtkEdgeInterpolationMap * EdgeMap
 
vtkIdType NumberOfNewCells
 
vtkIdType FastGeomQuadArrayLength
 
vtkIdType NumberOfFastGeomQuadArrays
 
unsigned char ** FastGeomQuadArrays
 
vtkIdType NextArrayIndex
 
vtkIdType NextQuadIndex
 
int PieceInvariant
 
vtkTypeBool PassThroughCellIds
 
vtkIdTypeArrayOriginalCellIds
 
char * OriginalCellIdsName
 
vtkTypeBool PassThroughPointIds
 
vtkIdTypeArrayOriginalPointIds
 
char * OriginalPointIdsName
 
int NonlinearSubdivisionLevel
 
int MatchBoundariesIgnoringCellOrder
 
vtkTypeBool Delegation
 
bool FastMode
 
- Protected Attributes inherited from vtkAlgorithm
vtkTimeStamp LastAbortCheckTime
 
vtkInformationInformation
 
double Progress
 
char * ProgressText
 
vtkProgressObserverProgressObserver
 
unsigned long ErrorCode
 The error code contains a possible error that occurred while reading or writing the file. More...
 
- Protected Attributes inherited from vtkObject
bool Debug
 
vtkTimeStamp MTime
 
vtkSubjectHelper * SubjectHelper
 
std::string ObjectName
 
- Protected Attributes inherited from vtkObjectBase
std::atomic< int32_t > ReferenceCount
 
vtkWeakPointerBase ** WeakPointers
 
typedef vtkPolyDataAlgorithm Superclass
 Statndard methods for object instantiation, type information, and printing. More...
 
static vtkDataSetSurfaceFilterNew ()
 Statndard methods for object instantiation, type information, and printing. More...
 
static vtkTypeBool IsTypeOf (const char *type)
 Statndard methods for object instantiation, type information, and printing. More...
 
static vtkDataSetSurfaceFilterSafeDownCast (vtkObjectBase *o)
 Statndard methods for object instantiation, type information, and printing. More...
 
virtual vtkTypeBool IsA (const char *type)
 Statndard methods for object instantiation, type information, and printing. More...
 
vtkDataSetSurfaceFilterNewInstance () const
 Statndard methods for object instantiation, type information, and printing. More...
 
void PrintSelf (ostream &os, vtkIndent indent) override
 Statndard methods for object instantiation, type information, and printing. More...
 
virtual void SetPieceInvariant (int)
 If PieceInvariant is true, vtkDataSetSurfaceFilter requests 1 ghost level from input in order to remove internal surface that are between processes. More...
 
virtual int GetPieceInvariant ()
 Statndard methods for object instantiation, type information, and printing. More...
 
virtual vtkObjectBaseNewInstanceInternal () const
 Statndard methods for object instantiation, type information, and printing. More...
 

Additional Inherited Members

- Public Types inherited from vtkPolyDataAlgorithm
typedef vtkAlgorithm Superclass
 
- Public Types inherited from vtkAlgorithm
enum  DesiredOutputPrecision { SINGLE_PRECISION , DOUBLE_PRECISION , DEFAULT_PRECISION }
 Values used for setting the desired output precision for various algorithms. More...
 
typedef vtkObject Superclass
 
- Static Public Member Functions inherited from vtkPolyDataAlgorithm
static vtkPolyDataAlgorithmNew ()
 
static vtkTypeBool IsTypeOf (const char *type)
 
static vtkPolyDataAlgorithmSafeDownCast (vtkObjectBase *o)
 
- Static Public Member Functions inherited from vtkAlgorithm
static vtkAlgorithmNew ()
 
static vtkTypeBool IsTypeOf (const char *type)
 
static vtkAlgorithmSafeDownCast (vtkObjectBase *o)
 
static vtkInformationIntegerKeyINPUT_IS_OPTIONAL ()
 Keys used to specify input port requirements. More...
 
static vtkInformationIntegerKeyINPUT_IS_REPEATABLE ()
 
static vtkInformationInformationVectorKeyINPUT_REQUIRED_FIELDS ()
 
static vtkInformationStringVectorKeyINPUT_REQUIRED_DATA_TYPE ()
 
static vtkInformationInformationVectorKeyINPUT_ARRAYS_TO_PROCESS ()
 
static vtkInformationIntegerKeyINPUT_PORT ()
 
static vtkInformationIntegerKeyINPUT_CONNECTION ()
 
static vtkInformationIntegerKeyCAN_PRODUCE_SUB_EXTENT ()
 This key tells the executive that a particular output port is capable of producing an arbitrary subextent of the whole extent. More...
 
static vtkInformationIntegerKeyCAN_HANDLE_PIECE_REQUEST ()
 Key that tells the pipeline that a particular algorithm can or cannot handle piece request. More...
 
static vtkInformationIntegerKeyABORTED ()
 
static void SetDefaultExecutivePrototype (vtkExecutive *proto)
 If the DefaultExecutivePrototype is set, a copy of it is created in CreateDefaultExecutive() using NewInstance(). More...
 
- Static Public Member Functions inherited from vtkObject
static vtkObjectNew ()
 Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More...
 
static void BreakOnError ()
 This method is called when vtkErrorMacro executes. More...
 
static void SetGlobalWarningDisplay (vtkTypeBool val)
 This is a global flag that controls whether any debug, warning or error messages are displayed. More...
 
static void GlobalWarningDisplayOn ()
 This is a global flag that controls whether any debug, warning or error messages are displayed. More...
 
static void GlobalWarningDisplayOff ()
 This is a global flag that controls whether any debug, warning or error messages are displayed. More...
 
static vtkTypeBool GetGlobalWarningDisplay ()
 This is a global flag that controls whether any debug, warning or error messages are displayed. More...
 
- Static Public Member Functions inherited from vtkObjectBase
static vtkTypeBool IsTypeOf (const char *name)
 Return 1 if this class type is the same type of (or a subclass of) the named class. More...
 
static vtkIdType GetNumberOfGenerationsFromBaseType (const char *name)
 Given a the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). More...
 
static vtkObjectBaseNew ()
 Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More...
 
static void SetMemkindDirectory (const char *directoryname)
 The name of a directory, ideally mounted -o dax, to memory map an extended memory space within. More...
 
static bool GetUsingMemkind ()
 A global state flag that controls whether vtkObjects are constructed in the usual way (the default) or within the extended memory space. More...
 
- Public Attributes inherited from vtkAlgorithm
std::atomic< vtkTypeBoolAbortExecute
 
- Static Protected Member Functions inherited from vtkAlgorithm
static vtkInformationIntegerKeyPORT_REQUIREMENTS_FILLED ()
 
- Static Protected Member Functions inherited from vtkObjectBase
static vtkMallocingFunction GetCurrentMallocFunction ()
 
static vtkReallocingFunction GetCurrentReallocFunction ()
 
static vtkFreeingFunction GetCurrentFreeFunction ()
 
static vtkFreeingFunction GetAlternateFreeFunction ()
 
- Static Protected Attributes inherited from vtkAlgorithm
static vtkTimeStamp LastAbortTime
 
static vtkExecutiveDefaultExecutivePrototype
 

Detailed Description

Extracts outer surface (as vtkPolyData) of any dataset.

vtkDataSetSurfaceFilter is a general-purpose filter to extract boundary geometry (and associated data) from any type of dataset. Geometry is obtained as follows: all 0D, 1D, and 2D cells are extracted. All 2D faces that are used by only one 3D cell (i.e., boundary faces) are extracted. The filter will handle any type of dataset, including unstructured grids with non-linear cells. (See also vtkGeometryFilter for additional documentation and information - vtkGeometryFilter is the preferred filter to use in most cases and may be deprecated in the future.)

The filter only has only a few options: methods for passing through point and cell ids (to support picking); and controls for nonlinear cell subdivision. At this time vtkDataSetSurfaceFilter has the distinction of being able to process non-linear cells requiring subdivision. For this reason, vtkDataSetSurfaceFilter should be used with non-linear cells; otherwise vtkGeometryFilter should be used. (Note: by default this filter will delegate processing of linear vtkUnstructuredGrids to vtkGeometryFilter as vtkGeometryFilter is so much faster. And vtkGeometryFilter will delegate to vtkDataSetSurfaceFilter when it encounters nonlinear cells.)

Fast Mode

vtkDataSetSurfaceFilter is sometimes used to simply render a 3D dataset. In which case we only are concerned about an approximate representation of the data and not necessarily the true exterior surface. In that case, simply set the FastMode flag to true.

Currently FastMode is used when extracting surface from a structured dataset or when Delegation is true. When Delegation is true, the flag is passed on to vtkGeometryFilter (see vtkGeometryFilter:SetFastMode).

Warning
At one time, vtkDataSetSurfaceFilter was a faster version of vtkGeometryFilter when processing unstructured grids, however vtkGeometryFilter is now faster. Also, vtkDataSetSurfaceFilter typically uses more memory than vtkGeometryFilter. Consequently as a convenience to the user, vtkDataSetSurfaceFilter will delegate to vtkGeometryFilter when processing linear vtkUnstructuredGrids. This typically produces a 5-10x speed up. (See vtkGeometryFilter for more information.) This delegation can be disabled by setting the Delegation data member.
vtkDataSetSurfaceFilter will generally not preserve topological connectivity. In other words, the output polygonal primitives may not be connected although in the originating dataset the boundary entities (e.g., faces) may have been connected. This can result in issues for filters that expect proper topological connectivity (e.g., vtkQuadricDecimation or vtkFeatureEdges).
A key step in this algorithm (for 3D cells) is to count the number times a face is used by a cell. If used only once, then the face is considered a boundary face and sent to the filter output. The filter determines this by creating a hash table of faces: faces that are placed into the hash table a single time are used only once, and therefore sent to the output. Thus large amounts of extra memory is necessary to build the hash table. This obsoleted approach requires a significant amount of memory, and is a significant bottleneck to threading.
This filter may create duplicate points. Unlike vtkGeometryFilter, it does not have the option to merge points. However it will eliminate points not used by any output polygonal primitive (i.e., not on the boundary).
See also
vtkGeometryFilter vtkStructuredGridGeometryFilter
Online Examples:

Tests:
vtkDataSetSurfaceFilter (Tests)

Definition at line 198 of file vtkDataSetSurfaceFilter.h.

Member Typedef Documentation

◆ Superclass

Statndard methods for object instantiation, type information, and printing.

Definition at line 206 of file vtkDataSetSurfaceFilter.h.

Constructor & Destructor Documentation

◆ vtkDataSetSurfaceFilter()

vtkDataSetSurfaceFilter::vtkDataSetSurfaceFilter ( )
protected

◆ ~vtkDataSetSurfaceFilter()

vtkDataSetSurfaceFilter::~vtkDataSetSurfaceFilter ( )
overrideprotected

Member Function Documentation

◆ New()

static vtkDataSetSurfaceFilter* vtkDataSetSurfaceFilter::New ( )
static

Statndard methods for object instantiation, type information, and printing.

◆ IsTypeOf()

static vtkTypeBool vtkDataSetSurfaceFilter::IsTypeOf ( const char *  type)
static

Statndard methods for object instantiation, type information, and printing.

◆ IsA()

virtual vtkTypeBool vtkDataSetSurfaceFilter::IsA ( const char *  type)
virtual

Statndard methods for object instantiation, type information, and printing.

Reimplemented from vtkPolyDataAlgorithm.

Reimplemented in vtkDataSetRegionSurfaceFilter.

◆ SafeDownCast()

static vtkDataSetSurfaceFilter* vtkDataSetSurfaceFilter::SafeDownCast ( vtkObjectBase o)
static

Statndard methods for object instantiation, type information, and printing.

◆ NewInstanceInternal()

virtual vtkObjectBase* vtkDataSetSurfaceFilter::NewInstanceInternal ( ) const
protectedvirtual

Statndard methods for object instantiation, type information, and printing.

Reimplemented from vtkPolyDataAlgorithm.

Reimplemented in vtkDataSetRegionSurfaceFilter.

◆ NewInstance()

vtkDataSetSurfaceFilter* vtkDataSetSurfaceFilter::NewInstance ( ) const

Statndard methods for object instantiation, type information, and printing.

◆ PrintSelf()

void vtkDataSetSurfaceFilter::PrintSelf ( ostream &  os,
vtkIndent  indent 
)
overridevirtual

Statndard methods for object instantiation, type information, and printing.

Reimplemented from vtkPolyDataAlgorithm.

◆ SetPieceInvariant()

virtual void vtkDataSetSurfaceFilter::SetPieceInvariant ( int  )
virtual

If PieceInvariant is true, vtkDataSetSurfaceFilter requests 1 ghost level from input in order to remove internal surface that are between processes.

False by default.

◆ GetPieceInvariant()

virtual int vtkDataSetSurfaceFilter::GetPieceInvariant ( )
virtual

Statndard methods for object instantiation, type information, and printing.

◆ SetPassThroughCellIds()

virtual void vtkDataSetSurfaceFilter::SetPassThroughCellIds ( vtkTypeBool  )
virtual

If on, the output polygonal dataset will have a celldata array that holds the cell index of the original 3D cell that produced each output cell.

This is useful for cell picking. The default is off to conserve memory.

◆ GetPassThroughCellIds()

virtual vtkTypeBool vtkDataSetSurfaceFilter::GetPassThroughCellIds ( )
virtual

If on, the output polygonal dataset will have a celldata array that holds the cell index of the original 3D cell that produced each output cell.

This is useful for cell picking. The default is off to conserve memory.

◆ PassThroughCellIdsOn()

virtual void vtkDataSetSurfaceFilter::PassThroughCellIdsOn ( )
virtual

If on, the output polygonal dataset will have a celldata array that holds the cell index of the original 3D cell that produced each output cell.

This is useful for cell picking. The default is off to conserve memory.

◆ PassThroughCellIdsOff()

virtual void vtkDataSetSurfaceFilter::PassThroughCellIdsOff ( )
virtual

If on, the output polygonal dataset will have a celldata array that holds the cell index of the original 3D cell that produced each output cell.

This is useful for cell picking. The default is off to conserve memory.

◆ SetPassThroughPointIds()

virtual void vtkDataSetSurfaceFilter::SetPassThroughPointIds ( vtkTypeBool  )
virtual

If on, the output polygonal dataset will have a celldata array that holds the cell index of the original 3D cell that produced each output cell.

This is useful for cell picking. The default is off to conserve memory.

◆ GetPassThroughPointIds()

virtual vtkTypeBool vtkDataSetSurfaceFilter::GetPassThroughPointIds ( )
virtual

If on, the output polygonal dataset will have a celldata array that holds the cell index of the original 3D cell that produced each output cell.

This is useful for cell picking. The default is off to conserve memory.

◆ PassThroughPointIdsOn()

virtual void vtkDataSetSurfaceFilter::PassThroughPointIdsOn ( )
virtual

If on, the output polygonal dataset will have a celldata array that holds the cell index of the original 3D cell that produced each output cell.

This is useful for cell picking. The default is off to conserve memory.

◆ PassThroughPointIdsOff()

virtual void vtkDataSetSurfaceFilter::PassThroughPointIdsOff ( )
virtual

If on, the output polygonal dataset will have a celldata array that holds the cell index of the original 3D cell that produced each output cell.

This is useful for cell picking. The default is off to conserve memory.

◆ SetFastMode()

virtual void vtkDataSetSurfaceFilter::SetFastMode ( bool  )
virtual

Turn on/off fast mode execution.

If enabled, fast mode typically runs much faster (2-3x) than the standard algorithm, however the output is an approximation to the correct result. Also, note that the FastMode depends on the data member Degree for its execution.

◆ GetFastMode()

virtual bool vtkDataSetSurfaceFilter::GetFastMode ( )
virtual

Turn on/off fast mode execution.

If enabled, fast mode typically runs much faster (2-3x) than the standard algorithm, however the output is an approximation to the correct result. Also, note that the FastMode depends on the data member Degree for its execution.

◆ FastModeOn()

virtual void vtkDataSetSurfaceFilter::FastModeOn ( )
virtual

Turn on/off fast mode execution.

If enabled, fast mode typically runs much faster (2-3x) than the standard algorithm, however the output is an approximation to the correct result. Also, note that the FastMode depends on the data member Degree for its execution.

◆ FastModeOff()

virtual void vtkDataSetSurfaceFilter::FastModeOff ( )
virtual

Turn on/off fast mode execution.

If enabled, fast mode typically runs much faster (2-3x) than the standard algorithm, however the output is an approximation to the correct result. Also, note that the FastMode depends on the data member Degree for its execution.

◆ SetOriginalCellIdsName()

virtual void vtkDataSetSurfaceFilter::SetOriginalCellIdsName ( const char *  )
virtual

If PassThroughCellIds or PassThroughPointIds is on, then these ivars control the name given to the field in which the ids are written into.

If set to nullptr, then vtkOriginalCellIds or vtkOriginalPointIds (the default) is used, respectively.

◆ GetOriginalCellIdsName()

virtual const char* vtkDataSetSurfaceFilter::GetOriginalCellIdsName ( )
inlinevirtual

If PassThroughCellIds or PassThroughPointIds is on, then these ivars control the name given to the field in which the ids are written into.

If set to nullptr, then vtkOriginalCellIds or vtkOriginalPointIds (the default) is used, respectively.

Definition at line 254 of file vtkDataSetSurfaceFilter.h.

◆ SetOriginalPointIdsName()

virtual void vtkDataSetSurfaceFilter::SetOriginalPointIdsName ( const char *  )
virtual

If PassThroughCellIds or PassThroughPointIds is on, then these ivars control the name given to the field in which the ids are written into.

If set to nullptr, then vtkOriginalCellIds or vtkOriginalPointIds (the default) is used, respectively.

◆ GetOriginalPointIdsName()

virtual const char* vtkDataSetSurfaceFilter::GetOriginalPointIdsName ( )
inlinevirtual

If PassThroughCellIds or PassThroughPointIds is on, then these ivars control the name given to the field in which the ids are written into.

If set to nullptr, then vtkOriginalCellIds or vtkOriginalPointIds (the default) is used, respectively.

Definition at line 259 of file vtkDataSetSurfaceFilter.h.

◆ SetNonlinearSubdivisionLevel()

virtual void vtkDataSetSurfaceFilter::SetNonlinearSubdivisionLevel ( int  )
virtual

If the input is an unstructured grid with nonlinear faces, this parameter determines how many times the face is subdivided into linear faces.

If 0, the output is the equivalent of its linear counterpart (and the midpoints determining the nonlinear interpolation are discarded). If 1 (the default), the nonlinear face is triangulated based on the midpoints. If greater than 1, the triangulated pieces are recursively subdivided to reach the desired subdivision. Setting the value to greater than 1 may cause some point data to not be passed even if no nonlinear faces exist. This option has no effect if the input is not an unstructured grid.

◆ GetNonlinearSubdivisionLevel()

virtual int vtkDataSetSurfaceFilter::GetNonlinearSubdivisionLevel ( )
virtual

If the input is an unstructured grid with nonlinear faces, this parameter determines how many times the face is subdivided into linear faces.

If 0, the output is the equivalent of its linear counterpart (and the midpoints determining the nonlinear interpolation are discarded). If 1 (the default), the nonlinear face is triangulated based on the midpoints. If greater than 1, the triangulated pieces are recursively subdivided to reach the desired subdivision. Setting the value to greater than 1 may cause some point data to not be passed even if no nonlinear faces exist. This option has no effect if the input is not an unstructured grid.

◆ SetMatchBoundariesIgnoringCellOrder()

virtual void vtkDataSetSurfaceFilter::SetMatchBoundariesIgnoringCellOrder ( int  )
virtual

When two volumetric cells of different order are connected by their corners (for instance, a quadratic hexahedron next to a linear hexahedron ), the internal face is rendered and is not considered as a ghost cell.

To remove these faces, switch MatchBoundariesIgnoringCellOrder to 1 (default is 0).

◆ GetMatchBoundariesIgnoringCellOrder()

virtual int vtkDataSetSurfaceFilter::GetMatchBoundariesIgnoringCellOrder ( )
virtual

When two volumetric cells of different order are connected by their corners (for instance, a quadratic hexahedron next to a linear hexahedron ), the internal face is rendered and is not considered as a ghost cell.

To remove these faces, switch MatchBoundariesIgnoringCellOrder to 1 (default is 0).

◆ SetDelegation()

virtual void vtkDataSetSurfaceFilter::SetDelegation ( vtkTypeBool  )
virtual

Disable delegation to an internal vtkGeometryFilter.

The geometry filter runs much faster (especially for unstructured grids); however the two filters produce slightly different output. Hence by default delegation is disabled.

◆ GetDelegation()

virtual vtkTypeBool vtkDataSetSurfaceFilter::GetDelegation ( )
virtual

Disable delegation to an internal vtkGeometryFilter.

The geometry filter runs much faster (especially for unstructured grids); however the two filters produce slightly different output. Hence by default delegation is disabled.

◆ DelegationOn()

virtual void vtkDataSetSurfaceFilter::DelegationOn ( )
virtual

Disable delegation to an internal vtkGeometryFilter.

The geometry filter runs much faster (especially for unstructured grids); however the two filters produce slightly different output. Hence by default delegation is disabled.

◆ DelegationOff()

virtual void vtkDataSetSurfaceFilter::DelegationOff ( )
virtual

Disable delegation to an internal vtkGeometryFilter.

The geometry filter runs much faster (especially for unstructured grids); however the two filters produce slightly different output. Hence by default delegation is disabled.

◆ StructuredExecute()

virtual int vtkDataSetSurfaceFilter::StructuredExecute ( vtkDataSet input,
vtkPolyData output,
vtkIdType ext,
vtkIdType wholeExt 
)
virtual

Direct access methods so that this class can be used as an algorithm without using it as a filter (i.e., no pipeline updates).

◆ UnstructuredGridExecute() [1/2]

virtual int vtkDataSetSurfaceFilter::UnstructuredGridExecute ( vtkDataSet input,
vtkPolyData output 
)
virtual

Execute the filter on input and store the result in output.

The correct function should be used accordingly to the type of the input.

Input can be any subclass of vtkUnstructuredGridBase. In case of a vtkUnstructuredGrid or subclass instance, an optimized version of the filter is executed.

Reimplemented in vtkDataSetRegionSurfaceFilter.

◆ DataSetExecute()

virtual int vtkDataSetSurfaceFilter::DataSetExecute ( vtkDataSet input,
vtkPolyData output 
)
virtual

Execute the filter on input and store the result in output.

The correct function should be used accordingly to the type of the input.

◆ UniformGridExecute()

virtual int vtkDataSetSurfaceFilter::UniformGridExecute ( vtkDataSet input,
vtkPolyData output,
vtkIdType ext,
vtkIdType wholeExt,
bool  extractface[6] 
)
virtual

Direct access methods so that this class can be used as an algorithm without using it as a filter (i.e., no pipeline updates).

◆ UnstructuredGridExecute() [2/2]

int vtkDataSetSurfaceFilter::UnstructuredGridExecute ( vtkDataSet input,
vtkPolyData output,
vtkGeometryFilterHelper info 
)

Optimized UnstructuredGridExecute function for vtkUnstructuredGrid and subclass instances only.

This function is used in vtkGeometryFilter.

◆ RequestUpdateExtent()

int vtkDataSetSurfaceFilter::RequestUpdateExtent ( vtkInformation ,
vtkInformationVector **  ,
vtkInformationVector  
)
overrideprotectedvirtual

This is called by the superclass.

This is the method you should override.

Reimplemented from vtkPolyDataAlgorithm.

◆ RequestData()

int vtkDataSetSurfaceFilter::RequestData ( vtkInformation request,
vtkInformationVector **  inputVector,
vtkInformationVector outputVector 
)
overrideprotectedvirtual

This is called by the superclass.

This is the method you should override.

Reimplemented from vtkPolyDataAlgorithm.

◆ FillInputPortInformation()

int vtkDataSetSurfaceFilter::FillInputPortInformation ( int  port,
vtkInformation info 
)
overrideprotectedvirtual

Fill the input port information objects for this algorithm.

This is invoked by the first call to GetInputPortInformation for each port so subclasses can specify what they can handle.

Reimplemented from vtkPolyDataAlgorithm.

◆ EstimateStructuredDataArraySizes()

void vtkDataSetSurfaceFilter::EstimateStructuredDataArraySizes ( vtkIdType ext,
vtkIdType wholeExt,
vtkIdType numPoints,
vtkIdType numCells 
)
protected

Estimates the total number of points & cells on the surface to render ext – the extent of the structured data in question (in) wholeExt – the global extent of the structured data (in) numPoints – the estimated number of points (out) numCells – the estimated number of cells (out)

◆ ExecuteFaceQuads() [1/2]

void vtkDataSetSurfaceFilter::ExecuteFaceQuads ( vtkDataSet input,
vtkPolyData output,
int  maxFlag,
vtkIdType ext,
int  aAxis,
int  bAxis,
int  cAxis,
vtkIdType wholeExt,
bool  checkVisibility 
)
protected

◆ ExecuteFaceQuads() [2/2]

void vtkDataSetSurfaceFilter::ExecuteFaceQuads ( vtkDataSet input,
vtkPolyData output,
int  maxFlag,
vtkIdType ext,
int  aAxis,
int  bAxis,
int  cAxis,
vtkIdType wholeExt 
)
protected

◆ InitializeQuadHash()

void vtkDataSetSurfaceFilter::InitializeQuadHash ( vtkIdType  numPoints)
protected

◆ DeleteQuadHash()

void vtkDataSetSurfaceFilter::DeleteQuadHash ( )
protected

◆ InsertQuadInHash()

virtual void vtkDataSetSurfaceFilter::InsertQuadInHash ( vtkIdType  a,
vtkIdType  b,
vtkIdType  c,
vtkIdType  d,
vtkIdType  sourceId 
)
protectedvirtual

Reimplemented in vtkDataSetRegionSurfaceFilter.

◆ InsertTriInHash()

virtual void vtkDataSetSurfaceFilter::InsertTriInHash ( vtkIdType  a,
vtkIdType  b,
vtkIdType  c,
vtkIdType  sourceId,
vtkIdType  faceId = -1 
)
protectedvirtual

Reimplemented in vtkDataSetRegionSurfaceFilter.

◆ InsertPolygonInHash()

virtual void vtkDataSetSurfaceFilter::InsertPolygonInHash ( const vtkIdType ids,
int  numpts,
vtkIdType  sourceId 
)
protectedvirtual

◆ InitQuadHashTraversal()

void vtkDataSetSurfaceFilter::InitQuadHashTraversal ( )
protected

◆ GetNextVisibleQuadFromHash()

vtkFastGeomQuad* vtkDataSetSurfaceFilter::GetNextVisibleQuadFromHash ( )
protected

◆ GetOutputPointId()

vtkIdType vtkDataSetSurfaceFilter::GetOutputPointId ( vtkIdType  inPtId,
vtkDataSet input,
vtkPoints outPts,
vtkPointData outPD 
)
protected

◆ GetOutputPointIdAndInterpolate()

vtkIdType vtkDataSetSurfaceFilter::GetOutputPointIdAndInterpolate ( vtkIdType  inPtId,
vtkDataSet input,
vtkCell cell,
double *  weights,
vtkPoints outPts,
vtkPointData outPD 
)
protected

◆ GetInterpolatedPointId() [1/2]

vtkIdType vtkDataSetSurfaceFilter::GetInterpolatedPointId ( vtkIdType  edgePtA,
vtkIdType  edgePtB,
vtkDataSet input,
vtkCell cell,
double *  pcoords,
double *  weights,
vtkPoints outPts,
vtkPointData outPD 
)
protected

◆ GetInterpolatedPointId() [2/2]

vtkIdType vtkDataSetSurfaceFilter::GetInterpolatedPointId ( vtkDataSet input,
vtkCell cell,
double  pcoords[3],
double *  weights,
vtkPoints outPts,
vtkPointData outPD 
)
protected

◆ InitFastGeomQuadAllocation()

void vtkDataSetSurfaceFilter::InitFastGeomQuadAllocation ( vtkIdType  numberOfCells)
protected

◆ NewFastGeomQuad()

vtkFastGeomQuad* vtkDataSetSurfaceFilter::NewFastGeomQuad ( int  numPts)
protected

◆ DeleteAllFastGeomQuads()

void vtkDataSetSurfaceFilter::DeleteAllFastGeomQuads ( )
protected

◆ RecordOrigCellId() [1/2]

void vtkDataSetSurfaceFilter::RecordOrigCellId ( vtkIdType  newIndex,
vtkIdType  origId 
)
protected

◆ RecordOrigCellId() [2/2]

virtual void vtkDataSetSurfaceFilter::RecordOrigCellId ( vtkIdType  newIndex,
vtkFastGeomQuad quad 
)
protectedvirtual

Reimplemented in vtkDataSetRegionSurfaceFilter.

◆ RecordOrigPointId()

void vtkDataSetSurfaceFilter::RecordOrigPointId ( vtkIdType  newIndex,
vtkIdType  origId 
)
protected

Member Data Documentation

◆ QuadHash

vtkFastGeomQuad** vtkDataSetSurfaceFilter::QuadHash
protected

Definition at line 403 of file vtkDataSetSurfaceFilter.h.

◆ QuadHashLength

vtkIdType vtkDataSetSurfaceFilter::QuadHashLength
protected

Definition at line 404 of file vtkDataSetSurfaceFilter.h.

◆ QuadHashTraversal

vtkFastGeomQuad* vtkDataSetSurfaceFilter::QuadHashTraversal
protected

Definition at line 405 of file vtkDataSetSurfaceFilter.h.

◆ QuadHashTraversalIndex

vtkIdType vtkDataSetSurfaceFilter::QuadHashTraversalIndex
protected

Definition at line 406 of file vtkDataSetSurfaceFilter.h.

◆ PointMap

vtkIdType* vtkDataSetSurfaceFilter::PointMap
protected

Definition at line 408 of file vtkDataSetSurfaceFilter.h.

◆ EdgeMap

vtkEdgeInterpolationMap* vtkDataSetSurfaceFilter::EdgeMap
protected

Definition at line 418 of file vtkDataSetSurfaceFilter.h.

◆ NumberOfNewCells

vtkIdType vtkDataSetSurfaceFilter::NumberOfNewCells
protected

Definition at line 423 of file vtkDataSetSurfaceFilter.h.

◆ FastGeomQuadArrayLength

vtkIdType vtkDataSetSurfaceFilter::FastGeomQuadArrayLength
protected

Definition at line 430 of file vtkDataSetSurfaceFilter.h.

◆ NumberOfFastGeomQuadArrays

vtkIdType vtkDataSetSurfaceFilter::NumberOfFastGeomQuadArrays
protected

Definition at line 431 of file vtkDataSetSurfaceFilter.h.

◆ FastGeomQuadArrays

unsigned char** vtkDataSetSurfaceFilter::FastGeomQuadArrays
protected

Definition at line 432 of file vtkDataSetSurfaceFilter.h.

◆ NextArrayIndex

vtkIdType vtkDataSetSurfaceFilter::NextArrayIndex
protected

Definition at line 434 of file vtkDataSetSurfaceFilter.h.

◆ NextQuadIndex

vtkIdType vtkDataSetSurfaceFilter::NextQuadIndex
protected

Definition at line 435 of file vtkDataSetSurfaceFilter.h.

◆ PieceInvariant

int vtkDataSetSurfaceFilter::PieceInvariant
protected

Definition at line 437 of file vtkDataSetSurfaceFilter.h.

◆ PassThroughCellIds

vtkTypeBool vtkDataSetSurfaceFilter::PassThroughCellIds
protected

Definition at line 439 of file vtkDataSetSurfaceFilter.h.

◆ OriginalCellIds

vtkIdTypeArray* vtkDataSetSurfaceFilter::OriginalCellIds
protected

Definition at line 442 of file vtkDataSetSurfaceFilter.h.

◆ OriginalCellIdsName

char* vtkDataSetSurfaceFilter::OriginalCellIdsName
protected

Definition at line 443 of file vtkDataSetSurfaceFilter.h.

◆ PassThroughPointIds

vtkTypeBool vtkDataSetSurfaceFilter::PassThroughPointIds
protected

Definition at line 445 of file vtkDataSetSurfaceFilter.h.

◆ OriginalPointIds

vtkIdTypeArray* vtkDataSetSurfaceFilter::OriginalPointIds
protected

Definition at line 447 of file vtkDataSetSurfaceFilter.h.

◆ OriginalPointIdsName

char* vtkDataSetSurfaceFilter::OriginalPointIdsName
protected

Definition at line 448 of file vtkDataSetSurfaceFilter.h.

◆ NonlinearSubdivisionLevel

int vtkDataSetSurfaceFilter::NonlinearSubdivisionLevel
protected

Definition at line 450 of file vtkDataSetSurfaceFilter.h.

◆ MatchBoundariesIgnoringCellOrder

int vtkDataSetSurfaceFilter::MatchBoundariesIgnoringCellOrder
protected

Definition at line 451 of file vtkDataSetSurfaceFilter.h.

◆ Delegation

vtkTypeBool vtkDataSetSurfaceFilter::Delegation
protected

Definition at line 452 of file vtkDataSetSurfaceFilter.h.

◆ FastMode

bool vtkDataSetSurfaceFilter::FastMode
protected

Definition at line 453 of file vtkDataSetSurfaceFilter.h.


The documentation for this class was generated from the following file: